Vertex Electronics

Vertex Electronics Hardware Design || Embedded Intelligent Systems || AI Automation || Control & Systems Engineering || Technical Consulting

28 days left.Cloud AI introduces 120–800ms of variable latency. A production line running at 120fps has an 8ms decision ...
19/08/2026

28 days left.
Cloud AI introduces 120–800ms of variable latency. A production line running at 120fps has an 8ms decision budget. The maths doesn’t work.
Edge AI accelerator PCBs bring 16 TOPS of inference performance to the factory floor — deterministic latency, offline capable, zero per-inference cost. The model is on the board. The data never leaves the factory.
The intelligence belongs on the floor. Not in a data centre.

Vertex Electronics — 16 September 2026
vertronicstech.com

29 days left.A collaborative robot monitors contact forces at 1kHz, tracks human proximity through four safety zones, ad...
18/08/2026

29 days left.
A collaborative robot monitors contact forces at 1kHz, tracks human proximity through four safety zones, adapts its compliance in real time using impedance control, and solves 6-axis inverse kinematics in 0.5 milliseconds — 1,000 times per second.
The safety is not the cage around the robot. The safety is the AI running it.

Vertex Electronics — 16 September 2026
vertronicstech.com

30 days left.A machine vision inference PCB inspects products moving at 1 metre per second — detecting defects as small ...
17/08/2026

30 days left.
A machine vision inference PCB inspects products moving at 1 metre per second — detecting defects as small as 0.1mm, running a convolutional neural network trained on 10 million samples, and signalling the reject gate in under 8 milliseconds.

It does not get tired. It does not have a worse performance on the night shift. It inspects every single product.

The AI is not replacing quality control. It is making quality control possible at scale.

Vertex Electronics — 16 September 2026
vertronicstech.com

32 days left.FR4 loses 8dB of signal in 10cm at 28GHz — more than three-quarters of the power, gone before the signal re...
15/08/2026

32 days left.
FR4 loses 8dB of signal in 10cm at 28GHz — more than three-quarters of the power, gone before the signal reaches the antenna. Rogers RO4003C loses 1.1dB over the same distance.
The substrate choice happens before the first trace is drawn. It determines what’s physically possible on the board. No amount of layout skill recovers 7dB of material loss.

At high frequency, the substrate is the design.

Vertex Electronics — 16 September 2026
vertronicstech.com

34 days left.An undersea cable landing station generates 15,000V DC on a single PCB to power repeaters across 8,000km of...
13/08/2026

34 days left.
An undersea cable landing station generates 15,000V DC on a single PCB to power repeaters across 8,000km of ocean floor. When something fails, optical time-domain reflectometry locates the fault to within 100 metres — before the repair ship leaves port.
95% of international internet traffic relies on electronics most engineers never get to work on.

Vertex Electronics — 16 September 2026
vertronicstech.com

35 days left.When the power goes out at a telecoms site, the equipment keeps running because a UPS PCB switched to batte...
12/08/2026

35 days left.
When the power goes out at a telecoms site, the equipment keeps running because a UPS PCB switched to battery in zero milliseconds — no switchover, because the battery and mains share the same 48V DC bus continuously.
That same PCB has been monitoring battery health for months, tracking internal resistance, and has already flagged that two cells need replacing before the next outage.

Nobody notices when the UPS works. That’s what good engineering looks like.

Vertex Electronics — 16 September 2026
vertronicstech.com

36 days left.At 10Gbps, a trace 0.1mm too wide mismatches impedance and causes reflections. A differential pair 0.1mm ou...
11/08/2026

36 days left.

At 10Gbps, a trace 0.1mm too wide mismatches impedance and causes reflections. A differential pair 0.1mm out of length match causes skew that closes the eye diagram. A via stub 3mm long resonates at the signal frequency and kills transmission.

Signal integrity is not a post-layout fix. It is a design discipline that starts with the first trace and ends at the receiver.

Vertex Electronics — 16 September 2026
vertronicstech.com

37 days left.A 5G base station RF PCB steers 64 antenna elements using digitally calculated phase weights — updated 2,00...
10/08/2026

37 days left.
A 5G base station RF PCB steers 64 antenna elements using digitally calculated phase weights — updated 2,000 times per second — to focus a millimetre-wave beam directly at each user. Every RF trace is matched to within 0.1mm. Every power amplifier dissipates 2 watts of heat into a sealed outdoor enclosure.

Your phone found 5G signal in 200 milliseconds. That board has been ready for a decade.

Vertex Electronics — 16 September 2026
vertronicstech.com

38 days left.Every 10°C reduction in junction temperature doubles the operational lifetime of a semiconductor.At 350W pe...
09/08/2026

38 days left.
Every 10°C reduction in junction temperature doubles the operational lifetime of a semiconductor.

At 350W per board, thermal management is not a packaging consideration — it is the primary PCB design discipline. Substrate selection, via array density, thermal interface materials, and liquid cold plate design all determine whether a high-power renewable energy board lasts 2 years or 20.

The difference between a warranty claim and a profitable product is measured in degrees.

Vertex Electronics — 16 September 2026
vertronicstech.com

39 days left.A 350kW DC fast charger contains an active front-end PFC PCB correcting the grid current to unity power fac...
08/08/2026

39 days left.
A 350kW DC fast charger contains an active front-end PFC PCB correcting the grid current to unity power factor, an LLC resonant converter operating at 98.5% efficiency, an ISO 15118 communication board running an encrypted TLS handshake with the vehicle, and an arc detection circuit with a 2-millisecond trip time.

None of these are off-the-shelf boards. Every one is a custom PCB design problem.

The plug is the simple part.

Vertex Electronics — 16 September 2026
vertronicstech.com

Address

Shantumbu Road
Lusaka
10101

Opening Hours

Monday 09:00 - 17:00
Tuesday 09:00 - 17:00
Wednesday 09:00 - 17:00
Thursday 09:00 - 17:00
Friday 09:00 - 17:00

Telephone

+260978778098

Website

Alerts

Be the first to know and let us send you an email when Vertex Electronics posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Vertex Electronics:

Shortcuts

Share

Category