What are the opening hours?

Monday 08:15 - 16:45 Tuesday 08:15 - 16:45 Wednesday 08:15 - 16:45 Thursday 08:15 - 16:45 Friday 08:15 - 16:15 Saturday 09:00 - 13:00

https://www.facebook.com/106994384182948/

HDCabling, 87a Rietfontein Road, Boksburg (2026)

05/10/2026

https://www.hdcabling.co.za/product/2-pole-smart-wifi-breaker-1-63a-40a-continuous-with-trip-limit-setting-energy-monitoring-overvoltage-overcurrent-temp-protection-din-rail-tuya-smartlife-app/
ONLY R449.00incl!

1-Pole Wired OR 2-Pole Smart Wifi Breaker | 1-63A | 40A Continuous Max (with Trip Limit Setting | Energy Monitoring | DIN Rail | Tuya / Smartlife App.

Make your home smart and to switch-off power based on smart scenes during load shedding or solar charging to preserve solar equipment battery life, switch of other high power devices based on routines when using a smart monitoring breaker as per options on this product.

NOTE!! Please ensure all electrical wiring is done by someone who is qualified to do so or knows how to work safely with electricity. Please be safe when working with electricity and ensure correct procedures followed. We recommend installation by a qualified electrician for all electrical equipment.

Note on 63A Breakers when using MAX Amps : According to Electrical standard a 4 AWG Wire Gauge is typically recommended, or 16mm² in Metric system sizes. Ensure your electrician uses the correct wires for the breakers amperage otherwise wires will burn and cause fire if incorrect electrical wiring done. Please use a qualified electrician to ensure all wires for breakers are up to standard.

If alternative gauge wires used with this variable Trip Limit Breaker please ensure the Correct Amps/Watts is set on the breaker to ensure the breaker can do a safe trip on the trip limit specified for the breaker. Neglecting to set a trip limit on the breaker with other wire gauges used, except for 16mm² can cause electrical issues and possible fires.

To install this DIN Rail breaker on a Samite Type Rail DB Board please use the adapter as at DIN Rail to Samite Rail Adapter.

If you need to use the breaker as a 1-Pole Breaker and ONLY LIVE going to an Appliance / Lights / Pump / Plugs etc then it must be wired as below. Ignore other breakers in this image as example, the LIVE wire can be from any other breaker below into the Smart Breaker if wiring correct, or from Earth Leakage or from Main/Sub DBBoard. Your Electrician will know the easiest way to wire based on your current DB Board wiring.

Features of Smart Breakers (Independent of monitoring capabilities):

With the 1-63A WIFI Smart Breaker, you can control high power appliances such as geysers, pool pumps, heat pumps, jacuzzi heaters or air-conditioners. Be sure to set the Amps to the wiring gauge installed for the smart breaker.
Schedule/Timer/Loop timer, Scene based routines can change status base on status of other smart devices.

Features and Specifications of 63A Smart Breaker:

Rated Voltage: 110-240V
Rated Current: 40 Amp continues / 63 Amp peak.
Connection: WIFI 2.4Ghz
Installation: Din Rail
Rated Frequency: 50/60hz

02/10/2026

https://www.hdcabling.co.za/product/hdmi-audio-extractor-to-optical-toslink-or-analog-stereo-audio-4k-60hz-hdmi-passthrough/
ONLY R495.00incl!

HDMI Audio Extractor to Optical Toslink or Analog Stereo Audio | 4k 60hz HDMI Passthrough.

The Audio Extractor is used to extract audio from any HDMI Stream from e.g HDPVR / DSTV Explora Decoder, Sony Playstation, Microsoft Xbox, Blu-ray Player etc and output it to a Dolby Digital 5.1 capable Optical Toslink port or Stereo RCA Port. Please note input audio should not exceed Optical 5.1 Dolby Digital specifications and streams such as 7.1 Master DTS or above 5.1 Audio cannot be extracted. These extractors are commonly used to extract audio to a Soundbar or a Home Theatre system capable of Optical Toslink Audio Inputs.

Specifications:

HDMI resolution input / output : up to 4k Ultra HD 60z (3840 x 2160 60Hz), 1080p and 720p and lower resolutions also supported.

Audio Outputs :

Optical Toslink for Dolby Digital 5.1/2.0 – Can be forced by switch on device, Analog RCA Red/White Audio Outputs
Support switch noise reduction
Supports ARC Function (Audio Return Channel)

Please note this product is supplied with a USB Power cable (Either Micro USB or USB C Depending on what the device requires) and does NOT INCLUDE A 220v to USB Wall Socket Power adapter.

The unit must be powered from a nearby USB Port on a HDTV/Projector/Digital Receiver or alternatively a 220v Wall Adapter to 5v USB Charger/Power supply similar to Slimline 5 Volt 2 Amp USB Wall Charger/Power Supply.

29/09/2026

Please Find us on https://www.hdcabling.co.za in Centurion & Boksburg as per address and contact details below:

28/09/2026

https://www.hdcabling.co.za/product/1x2-hdmi-v2-0b-splitter-scaler-with-hdr-4k-ultra-hd-60hz-edid-support/
ONLY R589.00incl!

1×2 HDMI v2.0b Splitter & Scaler with HDR | 4k Ultra HD 60hz | FullHD 1080p 120Hz & EDID Support.

The Ultra HD 1×2 HDMI Splitter uses a single HDMI source, splitting to multiple HDMI displays/screens. The Splitter allows one HDMI devices to be split into two HDMI compatible monitors or projectors. The Splitter can also be placed at the end of a long HDMI cable to regenerate the HDMI signal.

This splitter supports the refresh rates and color spaces below for 4K IF supported by both the display and the source/player/PC:

4k (3840 x 2160) 60hz YCbCr 4:4:4 8-Bit, YCbCr 4:2:2 12-Bit, YCbCr 4:2:0 12Bit, YCbCr 4:2:0 10 Bit & HDR, HDR10 & HDR10Plus
4k (3840 x 2160) 144/240hz YCbCr 4:2:2 10-Bit, YCbCr 4:2:0 12Bit, YCbCr 4:2:0 10Bit & HDR, HDR10 & HDR10Plus
YCbCr 4:2:2 12-bit is better than YCbCr 4:2:0 10-bit because it offers superior color detail (higher chroma resolution with 4:2:2) and a wider range of shades, reducing banding and providing smoother gradients, especially for HDR content and professional work

4:4:4 vs 4:2:2 vs 4:2:0 (Chroma Subsampling):
4:4:4 (No Subsampling): Full color for every pixel.
4:2:2: Half the horizontal color information (chroma) of 4:4:4 (2 color samples for every 4 luminance samples).
4:2:0: Quarter the color information (chroma) of 4:4:4 (2 color samples for every 4 pixels in a 2×2 block).

Benefit: 4:2:2 retains more color detail than 4:2:0, meaning less color blurring or artifacting, especially around edges and text.
12-bit vs 10-bit vs 8-bit (Bit Depth):
Bit Depth: Determines the number of distinct color shades available for each primary color (Red, Green, Blue).
8-bit: 256 shades per channel (around 16.7 Million colors).
10-bit: 1,024 shades per channel (over 1 billion colors).
12-bit: 4,096 shades per channel (over 68 billion colors).
Benefit: Higher bit depth (12-bit) provides significantly more steps between colors, preventing “color banding” (visible steps in smooth gradients) and creating smoother, more realistic images, crucial for HDR, HDR10 and HDR10Plus.

Please note this product is supplied with a USB Power cable (Either Micro USB or USB C Depending on what the device requires) and does NOT INCLUDE A 220v to USB Wall Socket Power adapter. The unit must be powered from a nearby USB Port on a HDTV/Projector/Digital Receiver or alternatively a 220v Wall Adapter to 5v USB Charger/Power supply similar to Slimline 5 Volt 2 Amp USB Wall Charger/Power Supply

Features:

Distribute 1 HDMI input signal to 2 channels of the same HDMI output to displays
Support UHD 4KX2K up to 60Hz, 1080p / 1920 x 1080 up to 120hz Support
Support 3D: If both HDMI signal sources and HDMI displays support 3D, this product will automatically recognize and output 3D video
Supported Audio: Support Standard Audio, DSD Audio and HD Audio Support
Supports the latest HDMI2.0b specification, backwards compatible with HDMI1.0, HDMI1.4
Supports HDCP version: HDCP 2.2 backwards compatible with HDCP1.4
Supported video resolution: 480i/480p/756i/756p/720p/1080i/1080p/4Kx2K at up to 60Hz

25/09/2026

https://www.hdcabling.co.za/product/2-in-1-wire-tracker-and-network-rj45-rj11-tester-tone-probe/
ONLY R589.00incl!

2-in-1 Wire Tracker and Network RJ45 / RJ11 Tester | Tone & Probe | Cable Tracker.

The wire tracker supports testing of a variety of cables, including network cables (Ethernet, RJ45), RJ11 (telephone lines and solar monitoring cables) and coaxial cables. Perform comprehensive tests for various cable types in one tool. Use the wire tracker function for cable mapping, continuity testing, and wire tracing. Quickly identify and troubleshoot cable issues with this all-in-one solution.

The cable tester provides highly accurate results. Identify open circuits, short circuits, and other connectivity issues with precision. The cable tester features a user-friendly interface with clear indicators and an easy-to-read display. The intuitive design makes it accessible for both professionals and beginners.

The durable construction ensures the cable tester can withstand regular use, while its portable design allows for convenient transport between different sites or DIY projects. The cable tester comes as a complete kit with remote units, adapters, and other accessories as per pictures.

Specification:

Working current: Tester: 10mA Receiver: 30mA
Signal transfer mode: Digital signal
Signal output level: 8Vp-p
Signal transfer distance: 3Km
Dimensions Transmitter: 126x49x34mm Reveiver:175x42x25mm
Power: by 2 x DC 9V Battery (not included)

Package Include:

1 x Cable Emitter
1 x Cable Receiver
1 x RJ11 Cable
1 x RJ45 Cable
1 x Earphone
1 x Wire st****er
1 x Cable with Crocodile Clamp
1 x Instruction Manual

21/09/2026

https://www.hdcabling.co.za/product/300m-cable-roll-cat6-unshielded-twisted-pair-utp-24awg-1-gigabit-s-cable/
ONLY R995.00incl!

300 Meter Cable Roll | CAT6 Unshielded Twisted Pair (UTP) 24AWG CCA Gigabit Network Cable.

Usage:

Telephony Voice Wiring
10 Mbps Networking
100 Mbps Networking
1000Mbps / 1Gbit/s Ethernet networking
Specifications
Conductor

Material:

CCA Construction 24AWG (0.51mm ±5%) Insulation
Material : HD-PE
Braids : 64
Thickness : 0.18mm
OD: 0.92mm

Twisted Pair – 568B Wiring Standard:

BLUE/WHITE and BLUE
ORANGE/WHITE and ORANGE
GREEN/WHITE and GREEN
BROWN/WHITE and BROWN
Shielding
Polyester + Crystal Foil
Jacket
Material : PVC
Thickness : 0.6mm

CCA CAT6 will reach lengths of around 70 Meter on 1Gbit/s.

18/09/2026

🔥 DEALS SO HOT THEY WON’T LAST! 🔥!!! ON SPECIAL NOW !!!

Looking for the ultimate savings? The time to buy is RIGHT NOW. We are slashing prices on your favorite items, but you have to act fast. Once our shelves are empty, these deals are gone for good!

Please visit us at https://www.hdcabling.co.za

17/09/2026

https://www.hdcabling.co.za/product/10-port-power-over-ethernet-poe-1gbps-gigabit-network-switch-8x-poe-2x-uplink-with-built-in-52v-2-88amp-psu-16w-per-port-max-ieee-802-3af-at/
ONLY R995.00incl!

10 Port Power over Network Gigabit POE Network Switch for IP Cameras / POE Access Points (8 x POE gig + 2 x 1 gig uplink) Built-in 52V 2.88Amp PSU, 16W per Port Max, IEEE 802.3af/at Cudy GS1010P.

This switch is an unmanaged 10 port, 1Gbps Gigabit Network Switch with 8 PoE Ports. Each of these PoE ports are IEEE 802.3af/at Compliant and will auto detect and identify whether the connected device is compatible and requires power. The Switch has a built-in 52V, 2.88A Power supply, no external power supply required. Total Power across all ports is 150 Watt, ±16W per POE Port Max.

It is ideal for small networks that have a number of 802.3af/at compatible Access Points, IP Phones or IP cameras.

HDCabling

05/10/2026

02/10/2026

29/09/2026

28/09/2026

25/09/2026

21/09/2026

18/09/2026

17/09/2026

Address

Opening Hours

Website

Alerts

Shortcuts

Share

Category

Listing takedown request

Monday	08:15 - 16:45
Tuesday	08:15 - 16:45
Wednesday	08:15 - 16:45
Thursday	08:15 - 16:45
Friday	08:15 - 16:15
Saturday	09:00 - 13:00