HomeNet Computer Repair

HomeNet Computer Repair Established in 2003, Home Net Computers is Seattle's trusted destination for comprehensive com... We are dedicated to restoring your system to peak performance.

Established in 2003, Home Net Computers is Seattle's trusted destination for comprehensive computer solutions. Specializing in crafting custom gaming systems and providing expert repairs, we cater to all your tech needs. Our services range from fixing viruses and hardware issues to screen repairs, tune-ups, and thorough cleaning. With over two decades of experience, we bring professionalism and expertise to every project, ensuring your computer receives the highest standard of care.

Another reported 16-pin connector melt has surfaced in a short period, and this case reportedly happened while the PC wa...
09/28/2026

Another reported 16-pin connector melt has surfaced in a short period, and this case reportedly happened while the PC was completely idle.

According to the owner, no third-party adapters or splitters were used. The graphics card reportedly ran factory VBIOS firmware, and the cable was reportedly a native 12V-2x6 connected to an ATX 3.1-compliant ASRock PG-1600G power supply.

I’m not diagnosing this specific unit or claiming a proven technical cause. The practical lesson is that a 16-pin connector melted at idle is not purely a load or overclocking problem. Contact resistance and how well the connector is seated can matter on their own, so idle operation is no guarantee against trouble.

For PC builders and repair technicians, 12V-2x6 connector inspection belongs in routine high-power GPU service. Check for discoloration, deformation, or a loose fit, especially when using an ATX 3.1 cable.

Installing a high-power GPU? I recommend creating a clear record from day one. Keep the original graphics card box, the ...
09/28/2026

Installing a high-power GPU? I recommend creating a clear record from day one. Keep the original graphics card box, the manufacturer-approved cable or adapter, and your purchase receipt together in one place. Record the power supply model, the cable used, and the date the system was built or upgraded. Photograph the 16-pin connector and cable before installation and again while the card is installed. These steps create useful GPU warranty documentation and high-power GPU build records.

In a reported case, the dispute centred on which cable was used. The owner says the system used a native 12V-2x6 cable from an ATX 3.1-compliant ASRock PG-1600G power supply, with no adapters or splitters and the factory VBIOS. The connector reportedly melted while the PC was idle. I’m not making a legal claim or predicting an outcome, just highlighting why careful documentation matters. Clear 12V-2x6 cable and 16-pin connector installation photos can help establish how your GPU was connected.

I’m following a reported warranty dispute involving a GeForce RTX 5090 and a melted 16-pin connector. According to custo...
09/27/2026

I’m following a reported warranty dispute involving a GeForce RTX 5090 and a melted 16-pin connector. According to customer reports and shared support tickets, the claim was reportedly denied after the owner used a native 12V-2x6 PSU cable instead of the manufacturer-approved adapter included in the box.

The manufacturer’s customer service reportedly stated that only its own approved cable or adapter is covered, while damage involving a third-party cable, adapter, or direct power-supply cable is the responsibility of the cable or power-supply manufacturer. The owner says the system used a native cable from an ATX 3.1-compliant ASRock PG-1600G power supply, with no adapters or splitters, factory VBIOS firmware, and the PC idle when the connector melted.

Community members reportedly found no matching clause in the published warranty documentation. I’m sharing this neutrally because it raises practical questions about RTX 5090 melted connector claims, 16-pin connector warranty language, and approved cabling.

RX 9070 specifications: ASUS Radeon RX 9070 Prime EVO OC, 2610MHz OC, 3,584 stream processors, RDNA 4, 16GB GDDR6, 20Gb/...
09/27/2026

RX 9070 specifications: ASUS Radeon RX 9070 Prime EVO OC, 2610MHz OC, 3,584 stream processors, RDNA 4, 16GB GDDR6, 20Gb/s, 256-bit memory bus. 16GB > 12GB GDDR6 for memory-heavy titles; I’ll check PSU/connectors.

I’m tracking GPU price increase 2026: ASUS RX 9070 XT price: $847–$939, up from $599 launch MSRP after chip-cost increas...
09/26/2026

I’m tracking GPU price increase 2026: ASUS RX 9070 XT price: $847–$939, up from $599 launch MSRP after chip-cost increases; RX 9070 hit $630 on Amazon vs. ~$715. Reports suggest a hike amid memory shortages. Check now.

I compare ASUS Prime RX 9070 GRE vs RX 9070 vs RX 9070 XT graphics card pricing: $580–$590 (12GB GDDR6), $630–$715/$847–...
09/26/2026

I compare ASUS Prime RX 9070 GRE vs RX 9070 vs RX 9070 XT graphics card pricing: $580–$590 (12GB GDDR6), $630–$715/$847–$939 (16GB GDDR6). Prices reported in the article change frequently; choose resolution, VRAM, budget.

I choose premium DDR5 memory for custom build: mirrored aluminum heatspreader (Gold/Silver), RGB DDR5 crystalline lightb...
09/25/2026

I choose premium DDR5 memory for custom build: mirrored aluminum heatspreader (Gold/Silver), RGB DDR5 crystalline lightbar, hand-screened memory ICs, 10-layer PCB. AMD AM5 memory kit: cooling, airflow & cables matter.

I’d pick DDR5-6000 for a Ryzen RAM upgrade. The AMD sweet spot at 1:1. AMD EXPO ULL pre-tunes secondary/tertiary subtimi...
09/25/2026

I’d pick DDR5-6000 for a Ryzen RAM upgrade. The AMD sweet spot at 1:1. AMD EXPO ULL pre-tunes secondary/tertiary subtimings in one BIOS click for ≤4% gains. 32GB (2x16GB), CL26/28/30/36; verify compatible CPU/board + supported BIOS.

I review G.SKILL Trident Z5 Royal NeoX: flagship AMD/AM5 DDR5-6000 1:1, 32GB 2x16GB; 26-36-36-32/28-36-36-32/30-38-38-32...
09/24/2026

I review G.SKILL Trident Z5 Royal NeoX: flagship AMD/AM5 DDR5-6000 1:1, 32GB 2x16GB; 26-36-36-32/28-36-36-32/30-38-38-32/36-36-36-76. EXPO ULL: tighter subtimings, one-click, up to 4% gaming. Needs compatible Ryzen+board+updated BIOS.

Strange interruptions? Stop using high-wattage GPU. I inspect and service gaming/workstation PCs at Home Net Computer Re...
09/24/2026

Strange interruptions? Stop using high-wattage GPU. I inspect and service gaming/workstation PCs at Home Net Computer Repair for melted GPU connectors, PSU damage. Early checks save GPUs. Local pickup/return.

Address

9735 Wallingford Avenue N #b
Seattle, WA
98103

Opening Hours

Monday 10am - 8pm
Tuesday 10am - 8pm
Wednesday 10am - 8pm
Thursday 10am - 8pm
Friday 10am - 8pm
Saturday 12pm - 5pm

Website

Alerts

Be the first to know and let us send you an email when HomeNet Computer Repair posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share

Category