VOLF Custom PCs

05/01/2026

🔥Overheating Issues 🔥
Customer brought in the PC in regards to a heating issue and auto shutdown due to the heat. We quickly identified that the PC airflow is in a negative pressure. There was air pulling in all directions.🔄
We recommended AIO replacement for the least.😊
🪛We precisely installed the new AIO from CORSAIR, we also angled the radiator a bit to clear the ram sticks. 🧹We cleaned the pc and rotated all the fans to its proper position, so the air can flow properly. There were some limitations to cable management due to the pc case.
💻Then the PC was optimized and run through a stress test and all the temps were nice and 🆒

📲 Contact Us Today for any issues with your Custom Build💯

03/01/2026

Quick Work 😉with swapping the fans to achieve a black and white built. We also cable managed neatly the customer🪛. He brought in a vision and we put it all together cleanly and precisely. 💯 Overall a every clean built😮‍💨

📲Contact Us Today for any work in regards to your PC☎️

02/21/2026

🪛CPU & GPU Upgrades⬆️

Customer went with Ryzen 7 5800xt with Wraith Prisms cooler and 5060TI OC. A solid choice for 1440p.💯
We also added M.2 SSD screw and AM4 OEM brackets for the new cpu cooler. 😉 After We cleaned and dusted🧹. Due to the limitations of the case and power supply, We tried our best to cable manage. We recommended that we install new window with all of cpu upgrades as it helps with the PC running cleanly and efficiently.💻We flashed the bios and optimized everything for the customer as requested for COD multiplayer😁. Overall we got the customer PC back the same day. 👏🏽Thank you for trusting in us🙏🏽

📞Contact Us today for anything regarding to your custom PC📲

02/13/2026

Return Customer 🤝 brought in a prebuilt pc for swapping the motherboard and bios update.

We ran into issue where all the prebuilt case connectors are out dated, So we recommended the customer to replace with the new case. ➡️Customer agreed to go with H5 Flow from NZXT which it is a good budget friendly and simplest option with the only RGB on the case is the power button 😅. A simple black out built🫶🏼.
After we got all the hardwares put together precisely, We flash the bios onto the motherboard. The manufacture bios needed to be flash for the new TPM version.

➡️So now the customer can rank up on COD unworried knowing their PC is run efficiently and skillfully assembled. 👌 Thank you for trusting in us🙏🏽

📲Contact us Today for any assistance with your PC!

01/06/2026

01/06/2026

Recently built a 1440p Power House 🏠 🔥

Customer brought in all the parts needed for the installation from Micro Center, and we had the pleasure of assembling and doing window installation on it.🙏🏽
💧The AIO did gave us a bit of a headache in terms of routing the pipes, but we made it work with some customization.🪛Part list below:⬇️

If you guys are in the Rochester, MN area, and in need of any PC works or recommendations. Please feel free to Contact Us📲 We are happy to help💯

🖥️Part List:

CPU: Ryzen 7 9800x3d
Motherboard: ASRock B850 Steel Legend
AIO: Lian Li HydroShift 360mm
Ram: T-force 32gbs 6000mhz
GPU: AMD RX 9070 XT 16gbs
Storage: 1TB of nvme m.2
PSU: Corsair RM850e
Case: Montech King 95 Pro
Operating on Window 11 Pro