What are the opening hours?

Monday 9am - 5pm Tuesday 9am - 5pm Wednesday 9am - 5pm Thursday 9am - 5pm Friday 9am - 4:30pm

Relay Pros, LLC

Home
United States
Osceola, MO
Relay Pros, LLC

Relay control for computer controlled relay and contact closure relay, trigger relays with a computer, browser or sensor.

09/14/2018

Friday Favorites…
Our most popular board this week was the R25PL_KEYFOB. This board is designed to receive Key Fob signals. Once the button is pressed data will be sent to the controller and switch the relays. The module can be removed and connected to a computer using the Key Fob Configuration Kit and configured. This allows multiple different configurations from toggle, to a simple momentary switch on all or individual relays. With boards that have 2 or more channels you can have different relays/buttons have different controls.
Learn more about this board at: http://www.relaypros.com/Relay/Device/R25PL_KEYFOB

08/31/2018

Friday Favorites…
Our most popular board this week was the TLR15_USB. These boards have built in firmware that keep track of both the date and time allowing you to set a schedule for triggering relays. Once programmed the board has the ability to work without a computer. This board has the ability to control up to 256 relays and the ability to have a manual override when using a computer. This board is ideal for any project.
Learn more at: http://relaypros.com/Relay/Device/TLR15_USB

08/29/2018

Did you know??
Each relay has two ratings for AC and DC. You can NEVER exceed these ratings. To determine the AC Watts you will multiply the AC Volts by the AC Amps.

AC Volts X AC Amps = AC Watts

08/22/2018

Did you know??
Each relay has two ratings for AC and DC. You can NEVER exceed these ratings. To determine the DC Watts you will multiply the DC Volts by the DC Amps.

DC Volts X DV Amps = DC Watts

08/17/2018

Friday Favorites…
Our most popular board this week was the R45PL_KEYFOB. This board is designed to receive Key Fob signals. Once the button is pressed data will be sent to the controller and switch the relays. The module can be removed and connected to a computer using the Key Fob Configuration Kit and configured. This allows multiple different configurations from toggle, to a simple momentary switch on all or individual relays. With boards that have 2 or more channels you can have different relays/buttons have different controls.
Learn more about this board at: http://www.relaypros.com/Relay/Device/R45PL_KEYFOB

08/15/2018

Did you know??
The life of a relay is determined by many factors. The most important in the lifespan of the relay is the number of cycles. Typically, the relays have a mechanical life 1 to 2 million cycles!

08/11/2018

Friday Favorites…
Our most popular board this week is the LRR45_USB. This board can be configured to will allow attached sensors to trigger relays at a predetermined setting. 0 to 5 volt sensors can be connected to the board which will convert the voltage to a numerical value between 0 and 255. You can also set what value you want the relays to trigger! Trigger above, below or in between values. Set delays after the value has been reached (light stays on for 10 minutes after sensor activation). Options are limitless!
Learn more at: http://relaypros.com/Relay/Device/LRR45_USB

08/08/2018

Did you know??
Our NCD relays have a constant use period of 5 years. You can use the controllers all you want and if the relay fails we will replace it!

08/04/2018

Friday Favorites…
This week’s most popular board this week is the UPOT8PROXR. This board is a variable resistor, capable of changing resistance under software control. Potentiometer are ideally suited for integration into various types of test instruments, programmable amplifiers, programmable power supplies, and anything else that can benefit by software controlled resistance variation
Learn more at: http://relaypros.com/Relay/Device/UPOT8PROXR

08/01/2018

Did you know??
Many of our relays are rated at 1,800 closures per minute. Larger power relays may be rated for less frequent use.

07/25/2018

Did you know??
Our relays are sealed relays. This means they are better resistance to dust and moisture. These relays also greatly reduce the sparks that are generated between the contacts greatly slowing corrosion on the contacts.

07/20/2018

Due to a storm that went through yesterday the manufacturer/production has been out of power. There will be a possible delay for us getting your order and then get it out to you. Thank you for your patience.

Address

Osceola, MO
64776

Opening Hours

Monday	9am - 5pm
Tuesday	9am - 5pm
Wednesday	9am - 5pm
Thursday	9am - 5pm
Friday	9am - 4:30pm

Website

http://www.relaypros.com/

Alerts

Be the first to know and let us send you an email when Relay Pros, LLC posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.