Crazyamericanreviewer

Crazyamericanreviewer Reviews on many products from phones to tools. Everyday use to once in a blue moon. Bringing you the

02/21/2024

Epic Games what a bunch of lowlife scam artist pieces of s**t. My computer got infected with a Trojan which effected my game play and my account got hacked and they will do nothing to help recover it. It was so bad I hat to reload my operating system. I have hundreds of dollars into the game for them to sit there and close my support ticket over and over instead of helping me. I have read the Better Business Bureau and they are not accredited and there are hundreds of people who have had the same problem and other issues and Epic Games wont even reach out to the BBB request for those people either. Bunch of lowlife people working over there. I WILL NEVER PLAY ANY GAME FROM Epic Games. If they cant show respect for people who have spent hundreds of dollars to support their games then why sit here and continue to support them. Funny thing is they only banned my fortnite account and not any other epic games. I really hope they do not expect me to play any of their other games they mise well just ban the whole damn profile of mine. Bunch of du*****es

It's In. The Cirkul Water bottle Review.Lets start off with the basics. Cirkul has two different types of bottles. Plast...
07/09/2023

It's In. The Cirkul Water bottle Review.

Lets start off with the basics. Cirkul has two different types of bottles. Plastic and Stainless Steel. The stainless steel bottles come in a variety of colors. Both the Stainless Steel and the Plastic bottle come in a variety of sizes as well. You can get the bottles in 42oz, 32oz, 22oz, and 12oz. On the Cirkul website you can also fine 12oz and 22oz plastic bottles along with custom 22oz stainless bottles.

Cirkul has come up with a huge variety of flavors that very depending on the category that you choose. But here is the thing, they are always working on a new flavor so note that the below flavors will change as time goes on. Among the variety of flavors we have,

1. LifeSip. Enriched with B-Vitamins to fuel your everyday. Delicious, Zero Calories, Vitamin Enhanced.

Honeycrisp Apple, Fruit Punch, Strawberry Kiwi, Peach Mango, Watermelon, Coconut Pineapple, Strawberry Lemonade (Stevia), Raspberry Lemonade, Sweet Tea & Lemon, Blueberry Cranberry (Stevia), Mango Grapefruit (Stevia), Berry Pomegranate (Stevia)


2. FitSip. Electrolytes to help keep you in the game. Replenishing, Zero Calories, Electrolyte Enriched.

Island Punch, Tropical Blast, White Cherry, Mixed Berry, Orange Tangerine, Lemon Lime (Stevia)

3. GoSip. A caffeinated kick when you're running on empty. Energizing, No Sugar, Caffeine Enhanced.

Blue Raspberry, Strawberry Watermelon, Cherry Limeade, Black Cherry, Grape, Green Apple, Blackberry, Citrus Twist, Orange


4. Gateway Tea. Explore all of life's flavors. Refreshing, caffeinated Iced Teas that taste like home.

Blackberry Tea, Green Tea, Tea & Lemonade, Sweet Tea, Peach Tea


5. Frosted. A sweet kick of confidence. Sweet, caffeinated Iced Coffee treat always ready to pick you up.

White Chocolate Raspberry Iced Coffee, Hazelnut Iced Coffee, Caramel Iced Coffee, Classic Iced Coffee, Mocha Iced Coffee, Vanilla Iced Coffee

6. Inflow Energy. Continuous progress, effortless energy. Optimized with Green Tea & Ginger Root extracts, Caffeine, B-Vitamins, and Taurine to get you in the flow.

Passion Fruit Dragon Fruit, Blackberry, Strawberry Kiwi, Watermelon, White Cherry, Wild Berry

7. Flyte. It's time to take Flyte. Packed with electrolytes to fuel your next move.

Hit Stick (Mixed Berry), Fast Break (Strawberry Banana), Overtime
(Orange), Goal Line (Lemon Lime), Lights Out (Blackberry),Rapid-Fire (Strawberry Watermelon), Shutout (Grape), Red Zone (Fruit Punch), Last Drive (Blue Raspberry)

8. Squeeze Lemonade. Squeeze More Out Of Life. Big, bold, delicious taste blended for you and the next generation lemonade drinker.

Grape Lemonade, Pink Lemonade, Orange Lemonade, Strawberry Lemonade, Blackberry Lemonade, Raspberry Lemonade, Watermelon Lemonade, Classic Lemonade, Blueberry Lemonade

9. Fission. Rethink Your Energy Drink. Premium body fuel packed with energy for the risk taker in you.

Shake & Bake (Strawberry Watermelon), Florida Man (Orange Citrus), Nocturnal (Berry Blend), Send It (Fruit Punch), Blue Magic
(Blue Raspberry), Jackpot (Green Apple), E.T. (Lemon Lime)

10. Stage. Hydration Without Compromise. Electrolyte enhanced, stevia-sweetened formula to reach your peak performance.

Berry Blend, Strawberry Watermelon, Blackberry Twist, Lemon Lime

11. Verda. Be true to you. Tasty, stevia-sweetened blends that put you in control of your flavor.

Kiwi Strawberry, Fruit Medley, Grapefruit, Cucumber Lime, Lemon, Strawberry, Clementine, Watermelon

12. Puressence. A hint of fruit essence in every sip. Unsweetened touch of fruit flavor to give your water a subtle yet delicious spin.

Strawberry (Unsweetened), Apple (Unsweetened), Cucumber (Unsweetened), Lemon (Unsweetened), Peach (Unsweetened), Pear (Unsweetened), Pineapple (Unsweetened), Raspberry Unsweetened)

Now that you know all of the current flavors, lets take a moment and talk about the bottles themselves. I want to start with the plastic bottle. This bottle is made of a very hard, and sturdy plastic. I myself have dropped the bottle many times with it either being full or empty and to my surprise there has been no damage to the bottle other than a few scratches. There is only one complaint that I have on the plastic bottle which is like most plastic bottle. If sat out at room temperature with ice in the bottle, the ice is generally melted in about half an hr and you will have to get more ice. The bottle is easy to hold and easy to drink from. I do like the fact that will all of their bottles there is no need to was the drinking spout as it is replaced each time with every flavor. This reduces the risk of mold buildup. Each flavor slip has a small hole in it that allows just the right amount of air to get into the bottle and release the flavor as you drink. I was actually a bit shocked to find out that no matter how hard I tried to pull a drink I was able to do so with no difficulty at all.

So onto the Stainless Steel bottle. This bottle as with the plastic bottle is mad from durable and lightweight stainless steel. The bottle is easy to carry and drink from. Unlike the plastic bottle this bottle will keep your drinks cold for hours. I also like that the stainless bottles come in a large variety of colors. This being said I find that dropping the stainless bottle tends to show more scratches and dings then the plastic bottle. Not to worry as Cirkul sells slip on covers to protect your bottles.

Not I want to share a few personal experiences with the flavor cartridges. The boxes that the flavors come in say that they can flavor six 20oz bottles of water. It is my understanding that they mean on the highest setting as it ranges from 0-10 with 10 being the max flavor that you can get. I personally use most of my flavors on 5 and have a 22oz bottle. With that being said I have never been able to get more than 3 full bottles at 22oz before the flavor runs out. I feel that someone has misjudged how many bottle you can actually get out of one flavor cart. I have tried every flavor that there is and I will say that they do truly taste what the flavor says it is. This is just me but I am not a huge fan of the coffee flavors but some will find them tasty and like them. I have also noticed that sometimes while drinking that after I take a sip, a bit of water will still come out from the tip. To stop this from happening I tilt the bottle in the upright position and finish the sip that way as to get all the water out of the tip. Not a huge deal but would be nice if they designed the tip to allow the water to fall back into the bottle.

I know I have given you all alot to read so we will get to the end. I 100% recommend Cirkul bottles and flavors to anyone looking to get away from all the crazy unhealthy dyes that alot of other drinks have. My go to would definitely be the Stainless Steel Bottle for its factor of keeping your drinks cooler for longer. I also encourage you to buy a few extra flavor carts as I do not believe they last as long as they say, and I find that after I started using Cirkul that I really drink alot more water and go threw many carts each week. You can buy your carts and your 22oz bottle at your local Walmart. Unfortunately they do not have any other sizes and have a limited amount of different flavors so your best choice is to order your flavors and if you want different bottles, from their website @ www.cirkul.com

Thank you all for taking the time to read this review and we cant wait for what we will bring you next. For now, Have a blessed day and be safe.

Until Next Time,
Crazyamericanreviewer

Milwaukee M18 Packout Radio ReviewCrazyAmericanReviewer product rating: 1-5 = 5Cost: $299.00USDI have had this radio for...
09/30/2022

Milwaukee M18 Packout Radio Review
CrazyAmericanReviewer product rating: 1-5 = 5

Cost: $299.00USD

I have had this radio for about 5 months now and I have to say this is one of the best job-site radios out there. This beast comes packed with a 10 speaker system which provides a 360 degree listening field. With its full ranged 4.2 bluetooth connectivity you can stream your audio from up to 100 feet away. The sound is extremely clear even at the highest volume setting including have the bass turned all the way up and with no distortion. This beauty also comes equip with a sub-woofer, passive radiator, and tweeters.

The M18 Packout Radio is compatible with all Packout systems and charges all M18 batteries and mobile devices with built in 6in. cord and USB 2.1A output. This radio can be used with the provided a/c cord or can run off of any M18 battery. On the right side of the unit you will find the M18 battery charger, auxiliary port, and usb charger port which is all enclosed behind a weather resistant door to keep out moisture, dust, and debris. The only downfall to this design is that while using the aux cord you will not be able to close the weather resistant door so extra caution is a must to prevent water, dust, and debris from entering the radio compartment. On the left hand side you will find a handy bottle opener.

The M18 Packout radio is 22L x 6.75H x 16.25W in and weighs 23lbs.
This radio is not submersible or weather proof only weather resistant. For the money I would defiantly recommend this to anyone looking to expand their Milwaukee systems.

Reviews on many products from phones to tools. Everyday use to once in a blue moon. Bringing you the details of it all. ...
09/15/2022

Reviews on many products from phones to tools. Everyday use to once in a blue moon. Bringing you the details of it all. I am not paid by any company to review and rate their products. If you would like to see a review and rating on a product, please feel free to send us a message or email us. If you are a company and would like to send us a product to review and rate, please also send us a message or e-mail us.

CrazyAmericanReviewer Galaxy Z Fold 4 review  CrazyAmericanReviewer product rating: 1-5 = 4.7With its starting price of ...
09/15/2022

CrazyAmericanReviewer Galaxy Z Fold 4 review
CrazyAmericanReviewer product rating: 1-5 = 4.7

With its starting price of $1800, the Samsung Galaxy Z Fold 4 doesn't offer anything too big or fresh over its predecessor, but regardless, it's still arguably the most incredible smartphone for tech enthusiasts and Android power users, to date.

With its many empowering multitasking features, stylus support, big and beautiful folding display, and respectable battery life, the Z Fold 4 can not only be a phone in your pocket and a tablet in your hands, but even your PC replacement.

Pros:

* Solid build
* Empowering multitasking features
* Beautiful displays
* Stylus support
* Smooth performance
* Good battery life

Cons:

* Expensive
* Still has a crease
* Thick and heavy, harder to carry around than a slab phone

What’s new about the Galaxy Z Fold 4 ?

Smaller hinge
Smaller bezels around the front display
Slightly different screen aspect ratio
New camera system from the Galaxy S22 line
Improved multitasking features

Although the Z Fold 4 keeps the same 12GB of LPDDR5 RAM as its predecessor, we now have the new, flagship Qualcomm Snapdragon 8+ Gen 1 processor on board.

The camera situation has changed a bit too, as the Z Fold 4 now basically rocks the Samsung Galaxy S22's camera set-up, which features higher specs for the wide and ultra wide cameras, plus a telephoto shooter with 3X optical zoom instead of 2X.

The battery stays at 4400 mAh, which might not seem like a lot for such a large phone, but we'll get to that later.

And last but not least, although it's not obvious by looking at the specs, the folding display's aspect ratio has been changed a tiny bit, making it shorter and a tad wider than before.

Galaxy Z Fold 4 Design & Colors

When folded, the Galaxy Z Fold 4 is a candy bar-shaped phone that, as my son commented when she first saw it, "looks like two phones glued together." It's not notably thinner than its predecessors, although it is technically the lightest Z Fold to date, at just 263 grams (9.28 oz).

It feels very premium and substantial in the hand, and since Samsung has managed to reduce its hinge bulge and the outer display's bezels, it looks better than ever.

As the Z Fold 4's name suggests, and surely you know – you can fold and unfold this phone, and, well, it takes a bit of effort to unfold it. You don't really have a spot to stick your finger in and start pulling the two halves apart, so you better have some nails, and you better not be sweaty, as the Z Fold's frames can get a bit slippery. At least in the insane heat that I'm currently living in. Also, there can be a slight creaking sound when unfolding it still, although that's rare. You get used to all that, but surely it's not the peak of what a foldable experience can be.

On a more positive note, closing the phone after using it unfolded is smooth and easy, and feels quite satisfying, as it ends with a reassuring magnetic snap.

We have dual stereo speaker grills, one on the Z Fold 4's top and bottom sides, plus a USB Type-C charging port on the latter. On the sides we have the volume keys, and a power key with an embedded fingerprint scanner. No in-display fingerprint scanner here.

For those who were hoping – unfortunately there's no slot for the S Pen stylus either, nor do you get one out the box. But Samsung does sell a Z Fold 4 case with an S Pen stylus slot, which might come in handy, should you plan on using the stylus daily.

The color options for the Z Fold 4 are called Graygreen, Phantom Black, Beige, and Burgundy, with the latter being exclusive to Samsung.com. The new colors look really nice in person, the green one in particular stands out as really classy, and Samsung mentioned that cases in the same colors will be available for purchase as well.

Galaxy Z Fold 4 Displays

Let's start with the smaller outer display (a.k.a. "cover display"), before we unfold this beast. We have a tall 6.2-inch dynamic AMOLED screen capable of up to 120Hz refresh rate. What does all that mean? It means Samsung didn't skimp on the outer display – it's super-smooth, and the fact that its AMOLED means solid blacks, vibrant colors, and a generally beautiful experience when using it.

And what can you use the cover display for? Basically anything – answering calls, replying to texts, browsing social media apps – anything you wouldn't bother unfolding the phone for. Sure, it's still a rather tall and not-very-wide display, but I wouldn't call it crammed. Using the on-screen keyboard is not a problem, and again – it's big enough for most tasks you may want to do without actually unfolding the Z Fold 4.

But now let's do exactly that and unfold it, revealing its gorgeous, big 7.6-inch flexible display. Again dynamic AMOLED, again 120Hz-capable, again very beautiful. Watching YouTube videos and movies, playing games, scrolling through social media apps or browsing the web on this display is an absolute joy. I can't oversell how cool it is to take a phone out of your pocket and go-go-gadget it into a square-ish tablet with a big display.

Which, by the way, is very comfortable to hold, especially compared to a tablet, thanks to its smaller size and weight, and square-ish aspect ratio.

But let's talk about display feel. The Z Fold 4's flexible display still feels a tad softer than an average glass screen, as we could've expected, but it's worth noting it nonetheless. It does support two S Pen styluses (the S Pen Fold edition and the S Pen Pro), so obviously it won't scratch easily, say, from your fingernails. You can press it and poke it pretty hard with zero issues.

There is a visible "screen protector" applied to the display, with corners that don't fully reach the display's edges (it's not even perfectly centered), and as we've learned from prior experiences – you shouldn't remove it. So that's just a part of the display.

Now, all those are minor details you should be aware of, but not something that affects the experience whatsoever, as you get used to them and won't even notice them after a while.

What I do still notice is that crease in the middle of the folding screen, though. It's visible when light hits the display, and it's definitely feelable.

Again – is this a big deal, or just a small price to pay (aside from the actual price) for using a cutting-edge folding phone? Honestly, I don't mind the crease, but I can't help but notice that some Samsung competitors, notably Oppo with its Find N foldable, have managed to completely remove the crease.

Galaxy Z Fold 4 Camera

The main camera module of the Z Fold 4 is virtually identical to its predecessor's module – it's a vertical, pill-shaped one, holding three cameras and a flash. But what has changed are those said cameras, which are now almost identical to what the Galaxy S22 packs.

There's a main 50-megapixel wide camera with optical image stabilization (OIS), a 12-megapixel ultra wide, and a 10-megapixel telephoto with OIS and 3X optical zoom. Combined with digital zoom, the zoom game on the Z Fold 4 raises up to 30X (12X in video mode), and the results are actually really good.

The Z Fold 4 is as smooth of a performer as its flagship specs suggest. Again, we have the Snapdragon 8+ Gen 1 processor inside, along with 12GB of RAM, which seem to be enough for stutter-free multitasking.

If you're a gamer, which by the way this phone is perfect for, you'll be happy to know that even heavy 3D games run fine at their highest settings, and since we have a 120Hz AMOLED display and dual stereo speakers – those games will look big and beautiful, and sound big too.

This is where things get fun. To me the Galaxy Z Fold 4 is a power user phone above all else, for heavy multitaskers and tech enthusiasts who wish to make the most out of just one device. Samsung thought of that, giving us all the features we might need.

The Z Fold 4 comes with Android 12L and OneUI 4.1.1 on top, and at first glance – you get a pretty normal Android / OneUI phone experience. We have a familiar homescreen with app icons and widgets, but open an app like Chrome and you'll notice that a fixed taskbar appears now.

Your Z Fold 4's interface would completely change from the standard Android one to something akin to MacOS, ChromeOS or Windows – with its own desktop, app icons, and a taskbar. Apps will start opening in fully resizable windows. That's not all, those windows can be snapped to the screen corners for quick and easy multitasking, just like on Windows 11.

Again, I'm very impressed with all of the amazing power user features Samsung delivers with the Z Fold 4, and would argue that it's the best power user phone to date, by far. No feature seems like an afterthought, everything is intuitive and polished.

And lest we forget, should you want to use a stylus with your Z Fold 4, you'll get specific features for that too, such as S Pen-specific shortcuts and, if you have the S Pen Pro – Air Gestures. Just remember to buy either that S Pen or the S Pen Fold edition, because I tried – other S Pens won't work here, as their tips are harder, and Samsung fears they may scratch the display.

Galaxy Z Fold 4 Battery:
As we mentioned earlier, for its size the Galaxy Z Fold 4 has a seemingly rather small 4400 mAh battery, split between two cells, one on each side of the phone.

But don't let that fool you – this phone is no slouch when it comes to the battery life. For example, in our YouTube playback battery benchmark, where we basically stream YouTube videos until the battery dies, the Z Fold 4 lasted nearly 9 hours.

Galaxy Z Fold 4 Charging Speeds:
In terms of charging, the Z Fold 4 comes with 25W wired charging support, which can deliver 50% charge in roughly 30 minutes, with a compatible 25W Samsung adapter. Samsung doesn't give you a charger out the box, by the way, so you'll have to get one separately.

In our testing, it takes just over an hour to fully change the phone from zero to 100% – 73 minutes to be precise.

We also have 10W wireless charging, which is convenient, and nice to see on a foldable in general.

Galaxy Z Fold 4 Audio Quality and Haptics:
With that big, beautiful display, you'd definitely want good audio too. After all, watching movies or gaming would be way less impactful without some solid stereo speakers.

And I'm happy to say that Samsung has delivered a good audio experience, although it hasn't been noticeably improved over last year.

We have two stereo speakers, one on each side of the phone (when held in landscape). Sounds and music can get reasonably loud and remain clear even at max volume, and, of course, there's a wide, true stereo effect thanks to the speaker placement.

Unfortunately, we don't get punchy iPhone-like bass, but the speakers do produce satisfactory lows nonetheless. So your YouTube videos and movies will sound at least as good as on a flagship Android tablet, if not better.

As for the haptics, despite the Galaxy Z Fold 4 being a big phone, you do feel good, reassuring taps when typing on the virtual keyboard. The haptic feedback does not feel hollow like on some phones, it's not unbalanced (e.g. just coming from one half of the phone), and it's not weak either, so no complaints there.

And now for the final verdict:

While it's not a major upgrade over its the Z Fold 3, the Galaxy Z Fold 4 is arguably the best smartphone for the tech enthusiast, who wants to do everything with just one device. It's a phone, it's a tablet, and can even act similarly to a PC!

With many amazing and polished power user features, such as split screen and windowed multitasking, a fixed taskbar, Samsung DeX, and stylus support, the Z Fold 4 fully empowers you to do everything you've ever wanted with Android.

And even if you just want to watch videos and movies, or game on something that's big, yet more comfortable in the hands than a tablet – the Z Fold 4 is still a great option to consider.

However, if you're not a die-hard tech enthusiast, or you already have a Z Fold 3, spending $1800 or more on this phone might not be worth it. Before you make this purchase, make sure that you'll really take advantage of everything this phone has to offer.

Galaxy Z Fold 4 specs

Display:
Size: 7.6 inches
Resolution: 2176 x 1812 pixels, 21.6:18 ratio, 373 PPI
Technology: Dynamic AMOLED
Refresh rate: 120Hz
Screen-to-body: 90.79 %
Features: Folding inside the device, HDR support, Ambient light sensor, Proximity sensor
Front cover display: 6.2 inches, 2316 x 904 pixels, Dynamic AMOLED, 120Hz refresh rate, HDR support, Ambient light sensor, Proximity sensor

Hardware:
System chip: Qualcomm Snapdragon 8+ Gen 1 SM8475 (4 nm)

Processor: Octa-core, 1x 3.19GHz Cortex-X2 + 3x 2.75GHz Cortex-A710 + 4x 1.80GHz Cortex-A510

GPU: Adreno 670

RAM: 12GB LPDDR5

Internal storage: 256GB (UFS 3.1), not expandable

Device type: Smartphone

OS: Android (12)
This device has different variants

Battery
Capacity: 4400 mAh
Type: Not user replaceable
Charging: Fast charging, Qi wireless charging

Camera
Rear: Triple camera
Main camera: 50 MP (OIS, PDAF)
Specifications: Aperture size: F1.8; Pixel size: 1.0 μm
Second camera: 10 MP (Telephoto)
Specifications: Optical zoom: 3.0x; Aperture size: F2.4; Pixel size: 1.0 μm
Third camera: 12 MP (Ultra-wide)
Specifications: Aperture size: F2.2; Pixel size: 1.12 μm
Video recording: 3840x2160 (4K UHD), 1920x1080 (Full HD), 1280x720 (HD)
Front: 4 MP (Under-screen)
Folded: 10 MP

Design
Dimensions: 6.11 x 5.12 x 0.25 inches (155.1 x 130.1 x 6.3 mm)
Folded: (155.1 x 67.1 x 15.8 mm)

Weight: 9.28 oz (263.0 g)

Materials: Back: Glass; Frame: Aluminum

Resistance: Yes; IPX8

Biometrics: Fingerprint (touch)

Keys: Right: Volume control, Lock/Unlock key

Colors: Graygreen, Phantom Black, Beidge

Cellular:
5G: 5G Ready
Data Speed: LTE-A, HSDPA+ (4G) 42.2 Mbit/s
SIM type: Dual Nano SIM + eSIM

Multimedia:
Headphones: No 3.5mm jack
Speakers: Earpiece, Multiple speakers
Screen mirroring: Wireless screen share
Additional microphone(s): for Noise cancellation
Connectivity & Features
Bluetooth: 5.2
Wi-Fi: 802.11 a, b, g, n, ac, ax (Wi-Fi 6); Wi-Fi Direct, Hotspot
USB: Type-C (reversible), USB 3.2

Features: Charging

Location: GPS, A-GPS, Glonass, Galileo, BeiDou, Cell ID, Wi-Fi positioning

Sensors: Accelerometer, Gyroscope, Compass, Hall (for flip covers), Barometer

Other: NFC

CrazyAmericanReviewer Creality CR-6 SE Review   CrazyAmericanReviewer product rating: 1-5 = 4.5Pros:* Solid bed leveling...
09/15/2022

CrazyAmericanReviewer Creality CR-6 SE Review
CrazyAmericanReviewer product rating: 1-5 = 4.5

Pros:
* Solid bed leveling (with live Z-offset)
*Great out-of-the-box print quality Premium design, compared to past Creality printers

Cons:
*Filament loading can be tricky
* Onboard settings a little sparse
* Questionable serviceability

I went hands-on with the CR-6 SE before the conclusion of its ~$4.5-million raising crowdfunding campaign and found that even that it had presented an elevated printing experience. I am writing this review 6 months later, and with my hands on the final, 32-bit board-toting retail version, I can say that the experience has remained pretty consistent. The CR-6 SE feels very much like the souped-up Ender 3 V2. The stock print quality is great, and both the big and small touches add up to a slightly premium-feeling version of the familiar Creality 3D printing experience. The auto-bed leveling is consistent and performs well, the new extruder is easy to work with if a little over-engineered. If you need a solid starter printer that prints well with little fuss, the Ender 3 V2 is still very much our recommended budget go-to. But if you want to do that in a little more comfort with less hands-on time with the printer, or enjoy owning odd and unique things, then the CR-6 SE is a justifiable upgrade. For $399, the CR-6 SE comes with a 235 x 235 x 250 mm build volume, dual Z-axis stepper motors, a Creality 4.5.2. 32-bit mainboard with TMC2209 stepper motor drivers, a textured glass bed, X- and Y-axis belt tensioners, and a sophisticated auto-bed leveling system that, for all its complexity, works really well. This, and a double whammy of new-style hot end and extruder. Really, quite the revamp of what came before in the Ender 3 V2. Rather than turning to the touch probe leveling used by past auto-bed leveling Creality printers, the CR-6 SE makes use of a load cell of sorts. Basically, the hot end assembly is fixed to a plate almost completely pocketed out of a larger plate, which is fixed to the print head. To determine a level, the print head lowers to the bed, meeting resistance when the nozzle comes into contact with the glass. This mechanical resistance translates to a change in electrical resistance, effectively “triggering the sensor. A mesh of these readings across the bed form the basis for a first layer that correctly accounts for any pitches in the surface. As far as we’ve seen, it’s pretty novel – pricier printers use similar systems, but we haven’t seen anything similar to this on other “budget” machines. Theoretically, this system means you can swap nozzles, heater blocks, heat sinks…whatever, providing they fix to this plate, and continue auto-bed leveling without skipping a beat. In practice, it works very well. On no occasion did we find it failed to provide an even first layer. As with the Ender 3 V2, you can live-adjust the Z-axis, which helps to achieve the correct amount of squish. The whole print head plays into Creality’s notion of a modular hot end – one with the majority of components plugged locally into the print head and easily swappable. The implementation is neat, and we can see the benefit it might bring in servicing the printer. Whether spares will be sold preconfigured for the CR-6 SE, or you’d have to get handsy nipping cables and sleeving them in the connectors, we’ve yet to see. Creality would be missing a trick if they didn’t release high volume or high temp variants of the hot end to easily swap in. Speaking of the hot end, the CR-6 SE’s is a svelte nubbin of metal that looks incredible. Of course, this counts for nothing in its performance, but as a slim, near skeletal red strip of a heat sink leading to a square, silicone shrouded heater block, it looks neat. With screws serving as standoffs – necessary, we imagine, to protect the heatbreak from the bed leveling procedure – it bears some resemblance to Slice Engineering’s Mosquito. Lots of air gaps and a compact footprint. One observation is that the Bowden tube sits very deep in the heatsink, butting right up on the heatbreak. Were you to print with the likes of PETG, ABS, ASA, or similar high-temp filaments, we would consider swapping the provided generic PTFE tube for a named brand you know is rated well for high temperatures. Besides bed leveling, the CR-6 SE also benefits from a new-style extruder that uses a lever action to tension the filament against the driving gear. Its novelty contributes to the CR-6 SE’s general sense of being a cut above the company’s other machines. It’s not a dual toothed gear feed though, like on the newer 3DPrintMill, but it does serve its purpose. Avoid taking it apart unless you absolutely have to. If you do, be very careful removing the housing – there are comically small pieces that will fall out and get lost in the carpet. We’re not keen on the closed-box nature of the extruder, nor the frankly obnoxious placement of the filament sensor, which leaves you with little room to maneuver. Only the straightest filament makes it through both without catching or needing awkward intervention. Interacting with the CR-6 SE is handled via a responsive color touchscreen, with Creality’s skin over the Marlin firmware. Similar in most ways to that on the Ender 3 V2, there are some small changes to accommodate the change in features, such as an auto-level button. You get a little less live print information on the CR-6 SE than you do the Ender 3 V2, which is an odd step backward. Something we’d expect to be rectified in a firmware update. In practice, this touchscreen is a pleasant way to interact with the printer, responding to your touch in an instant. We don’t miss the imprecision of a rotary encoder, that’s for sure. Running the CR-6 SE and Ender 3 V2 side by side for some comparison prints left us preferring setting prints up on the CR-6 SE, simply for how much quicker it is to tap through the menus. Further pleasantness marking the CR-6 SE apart is its use of a full-size SD card, which gives an obvious benefit if you’ve ever dropped a microSD card on a dark carpet and have anything short of eagle-like vision. Also, belt tensioners on the X- and Y-axes, a tool drawer (unlike the Ender 3 V2, with the tools actually inside it,) and dual stepper motors driving the Z-axis. Our CR-6 SE shipped with a slightly out of date version of Creality’s Creality Slicer software (a Creality-skinned and customized version of Cura.) This software, out of the box, has a printer profile for the CR-6 SE but misses print quality profiles – a key feature of Cura – making the software experience untidy and not particularly easy if you’re not already familiar with Cura. However, downloading the latest version of Creality Slicer adds print quality profiles (yay) but omits an obvious printer profile for the CR-6 SE (nay.) We say obvious because really, it is there, just labeled simply as the “CR-6”, which makes for a rather unhelpful time of getting acquainted with the software. This really is the last frontier for these cheaper 3D printers – a cohesive software experience. We’re not currently there yet, apparently. On the other hand, being a peppier-looking Cura, Creality Slicer is pleasant to look at and, while missing the broad selection of material profiles and quality profiles stock Cura carries, is as capable as stock Cura for those familiar with it. Kinda. The bottom line is your printing won’t be any better than that found with the Ender 3 V2. But, using the CR-6 SE for the better part of a few weeks has been quite instructive for us. You really do get the sense of it being a printer pushing to break new ground in some way. But this doesn’t escape the fact that it’s still just a souped-up Ender 3 V2. The printing performance is on par with that printer. On the flip side, the bed leveling system is *insert chef’s kiss gif here*. There are no bed leveling k***s present on the CR-6 SE, and we’re so glad for it. Manual bed leveling sucks, and the less time we have to spend doing it, the happier we are – so full credit to the CR-6 SE for that. Similarly, using a touchscreen to manipulate the printer feels current, easy, second nature. It stands to reason that it feels right since most of us spend our days thumbing through our smartphones. It’s quick, quiet, has exotics parts that are fun to poke around and explore. For this novelty in its custom parts, an immensely satisfying bed leveling system (for a sub-$400 printer,) and a printing experience on part with an Ender 3 V2, it makes a good case for itself. It’s a bit like a sports car, in that it still gets you from A-B, and is enjoyably special in the here and now. But only longer-term use will tell if those unusual parts can hack the long-haul, or if you’ll end up modding it sideways with more familiar components. Features Sleek Design & Easy Setup The CR-6 SE’s well-stocked tool drawer The CR-6 SE has a stylish appearance sprinkled with some useful features. Embedded in the base, you’ll find a little compartment for storing nozzles, needles, pliers, and other tools. The handle on the gantry enables you to carry the printer around safely without the risk of offsetting belts or tensioners. The printer itself comes assembled and should be ready out of the box within minutes. Just connect the gantry to the base with four screws, and you are ready to print. Innovative Bed-Leveling Probably the most noteworthy feature on the Creality CR-6 SE is the automatic platform leveling. Where on most Creality 3D printers you would have to make do with manually leveling via a sheet of paper, the force-based sensor on the CR-6 SE promises hassle-free automatic bed leveling. Having a truly leveled print surface greatly improves bed adhesion and print quality overall, with much less hassle. Tempered Glass Plate Creality’s carborundum textured glass print plate The Creality CR-6 SE comes with a carborundum glass plate as its build platform – Creality’s take on the popular Anycubic Ultrabase. The glass print bed seems to improve overall material adhesion, reduce the need for adhesives, provide a smooth surface, and let you remove prints easily once cool, something we confirmed during our testing. Rigid Build A recurring issue with fused deposition modeling (FDM) 3D printers is inconsistency on the surface of prints. The CR-6 SE features dual lead screws, which, in combination with the printer’s sturdy aluminum frame, can help to reduce vibrations, and therefore reduce Z-wobble giving a smoother finish of prints. The connector belt on top of the Z-axis should ensure synchronized movement. All of this results in better quality, even towards the top of the build volume. Under the Hood The CR-6 SE is outfitted with a 32-bit Crealtiy 4.5.2 silent motherboard and an ATmega2560 control chip, which contributes to smooth operation and thermal equality when printing. In combination with the powerful 24V 350W MeanWell power supply, the CR-6 SE heats quickly and operates at a low noise level of around 30 decibels. Touchscreen The CR-6 SE features a large, portrait-oriented color touchscreen with a bold user interface. Using the printer should be a piece of cake for those of us blessed with large digits on our hands. The UI is, generally, a breeze to navigate and presented us with no issues. Further Features Additional features on the Creality CR-6 SE include: Modular nozzle: Creality designed the hot end with modularity in mind. Users can exchange the heat block, heat sink, PTFE tube, or the nozzle tip with the included spares. Extruder: The redesigned extruder allows for straightforward feeding of filament. Filament sensor: The CR-6 SE has a photoelectric filament sensor detecting any possible filament breakage or runout. Resume print function: Outages or disconnections should be no problem for CR-6 SE because it can fully recover and resume the print when it’s back up. We confirmed this feature while testing. TMC2209 motor drivers: Another stretch goal, passed at the $3-million mark. The addition of TMC2209 motor drivers makes for more precise and quiet printing. Mean Well power supply: Clarified in a Kickstarter update, the CR-6 SE ships with a high-quality Mean Well power supply. Max It Out With the suggestion having gained a massive amount of popularity among backers, Creality added a brand-new CR-6 Max variant of the SE to its Kickstarter campaign just five days before its close. Boasting a massive 400 x 400 x 400 mm build area, Z-axis supports, and all of the add-on features unlocked through the stretch goals of the campaign, the CR-6 Max is lining up to be a heavy hitter (although Creality notes the exact features may change during further development). Techincial Specifications General Specifications Technology: Fused deposition modeling (FDM) Year: 2020 Assembly: Partially assembled Mechanical arrangement: Cartesian XZ-head Manufacturer: Creality 3D Printer Properties Build volume: 235 x 235 x 250 mm Feeder system: Bowden Print head: Single nozzle Nozzle size: 0.4 mm Max. hot end temperature: 260 ℃ Max. heated bed temperature: 110 ℃ Print bed material: Glass Frame: Aluminum Bed leveling: Automatic Connectivity: SD card, micro USB Print recovery: Yes Filament sensor: Yes Camera: No Materials Filament diameter: 1.75 mm Third-party filament: Yes Filament materials: Consumer materials (PLA, ABS, PETG, flexibles) Software Recommended slicer: Creality Slicer, Cura, Simplify3D, Repetier-Host Operating system: Windows, Mac OSX File types: STL, OBJ, AMF Dimensions and Weight Frame dimensions: 442 x 462 x 540 mm Weight: 9.5 kg

Address

Morrisonville, NY
12962

Website

Alerts

Be the first to know and let us send you an email when Crazyamericanreviewer posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Crazyamericanreviewer:

Share