DEMON PC

DEMON PC Custom made desktop PC's. We build to suit your needs

Whether it be a basic home computer, or a high end gaming rig or top of the line editing\rendering\workstation rig, up to fully water-cooled systems and servers.

08/01/2024

H U G E

well, all i can say is ship the garbage back or toss it in the dumpster where it belongs. flashforge support told me th...
06/23/2024



well, all i can say is ship the garbage back or toss it in the dumpster where it belongs. flashforge support told me they would assist me with issues with my 5mpro and it would take about a week. then this morning i got an email telling me that they will not help me and to return it. could have told me that 4-5 days ago instead of saying they would help with my issues. I told em that because of that response, they're going to be blasted all over social media for their s**t support and product.

so here is the second blast on social media. Do not buy products. Their support and products are horrible!!!

Cable management on the backside still needs working. I had to make some last minute changes for rgb controllers and mes...
05/05/2024

Cable management on the backside still needs working. I had to make some last minute changes for rgb controllers and messed up the whole game.

System uses 1 full gallon between both loops. Currently running primochill vue red and silver. Red for cpu loop, silver for gpu loop. I'll update with a full picture next post.

And they're finished!
03/03/2024

And they're finished!

6 more hours and they're done
03/03/2024

6 more hours and they're done

The next build coming in hot.Chassis: Corsair obsidian 1000D Main system:Cpu: Intel i9 7980xeMemory: 128gb Corsair venge...
02/10/2024

The next build coming in hot.

Chassis: Corsair obsidian 1000D
Main system:

Cpu: Intel i9 7980xe
Memory: 128gb Corsair vengeance rgb 3200mhz
Motherboard: Asus Rampage VI Extreme Omega
Power supply: Corsair ax1500i
Cpu water block: Corsair xc8 JTC edition
Gpu: 2 x Zotac trinity oc 3090
Gpu waterblocks: Heatkiller 3080/3090
Storage. 4 x 2tb samsing 970 Evo plus
Radiators: xspc 2 x tx480 top mount
Pump/reservoir: 1 x swiftech 300mm

Secondary system:

Cpu: to be determined
Motherboard: to be determined
Memory: to be determined
Gpu: Asus rog strix 4090
Power supply: more than likely corsair sff 1000L
Cpu waterblock: more than likely corsair xc8 JTC edition
Gpu waterblock: more than likely heatkiller, but to be determined.
Radiators: xspc 2 x ax480

Case fans: Lian Li 120mm uni sl infinity, more than likely pish/pull configuration on all 4 480 rads.

System will be hardline. Haven't decided between xspc 10/14 fittings or thermaltake 14/16 fittings.

Anybody tell me what's wrong with this build?As a newbie builder to watercooling 9 years ago, I made a mistake on this r...
01/01/2024

Anybody tell me what's wrong with this build?

As a newbie builder to watercooling 9 years ago, I made a mistake on this rig. Looked good on paper but there is a fatal flaw.

Well, new year new build. Gpu loop is up and running. Doing leak testing on it. 480mm rad coming in this week to replace...
01/01/2024

Well, new year new build. Gpu loop is up and running. Doing leak testing on it. 480mm rad coming in this week to replace the 420 rad on top. Diagnose why bottom far right fan is not working.

Well. Happy new years to everyone!

This was a fun build as well.Intel i9 7980xe CORSAIR Hydro X Series XC8 JTC Edition oc to 4.8 @1.275vAsus rampage vi ext...
12/11/2023

This was a fun build as well.

Intel i9 7980xe CORSAIR Hydro X Series XC8 JTC Edition oc to 4.8 @1.275v
Asus rampage vi extreme omega
Corsair vengeance rgb pro 3200mhz 8x16gb ( forgot to take a picture with all modules in place)
Zotac trinity 3090 oc heatkiller waterblock
Xspc and alphacool fittings
10/14mm xspc petg
Lian Li sl120 infinity x10
Lian Li 011D XL
1 x Corsair xr5 360 in the top. (xr7 wouldn't fit with this motherboard. Sadly it would fit past the vrm cooler. maybe with the vrm waterblock?)
2 x Corsair xr7 360 on bottom and side.

When you finally get to add that 4th card to your old system. Its been a long time waiting for a gpu to come available ...
12/11/2023

When you finally get to add that 4th card to your old system. Its been a long time waiting for a gpu to come available with a matching waterblock. Sadly it is from a different manufacturer so im hoping when the system gets assembled, I can flash the same bios to the bottom card.

Top three are Asus 780ti models and the bottom is an evga 780ti model. I've been wanting to add in that 4th card for 7 years now.

Don't mind the dirt and stained hardware all will be cleaned before final assembly. The chassis is dirty, theres dust and dirt and staining in parts. Radiators will need to be flushed and blocks disassembled for scrubbing and to remove oxidation .

Why you ask would I work on building a pc with such old hardware... it's simple, it may no longer be high-end or even low end to today's standards. But it still runs and functions and still gets good fps in games. I mainly wanted to add the 4th card years ago for 3D rendering so for sh!t$ and giggles, I'll be loading it up with some games and scene renderings to see how it stacks up against my 2x2080ti's/2×2080super/1x3090.

Dual loop setup and all new configuration. I think you all will appreciate the build once completed.

After a few months, this rig was finally able to be completed. There were a few small changes to tubing runs that I did...
07/14/2023

After a few months, this rig was finally able to be completed. There were a few small changes to tubing runs that I didn't get photos of.

The second 900D is now finished. Need to track down a third for the server build .us Corsair 900DCorsair HX1000iCors...
11/27/2022

The second 900D is now finished. Need to track down a third for the server build

.us

Corsair 900D
Corsair HX1000i
Corsair lighting node pro
CORSAIR LPX DDR4 3200MHZ 4X16GB
Evga x299 FTW-K
Intel i9 7980xe
Phanteks cpu block,( unsure of model )
Asus strix 2080ti in sli
Bykski 2080ti waterblocks
Xspc 120mm pro
Xspc tx480 rads
Xspc 240 rad
Xspc fittings
Xspc 10/14 petg
Swiftest maelstrom x300 pump/res combos

Spec on PC on the right not listed

Address

1468 East 3045 South
Millcreek, UT
84106

Opening Hours

Monday 9am - 8pm
Tuesday 9am - 8pm
Wednesday 9am - 8pm
Thursday 9am - 8pm
Friday 9am - 8pm

Telephone

(801)550-7584

Website

Alerts

Be the first to know and let us send you an email when DEMON PC posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to DEMON PC:

Shortcuts

Share

Category