The Listening Room

The Listening Room At The Listening Room we offer a carefully curated selection of only the best audio products. Appointments available weekdays.

We went to visit the all new Perlisten HQ last week. Multiple listening rooms, the Klippel measurement system, an R&D ro...
09/03/2026

We went to visit the all new Perlisten HQ last week. Multiple listening rooms, the Klippel measurement system, an R&D room with things still under sheets. Top notch.

cheapaudioman filmed the whole thing. His coverage is the closest you will get to standing in those rooms, and he included our site in his video! Thanks, Randy!

Go watch the video and follow the channel!

Full tour: https://www.youtube.com/watch?v=1hWeV8TkzJI

·

09/01/2026

Yes, this is the legendary Magnepan Mick, some say the best dressed man in the industry.

On our visit to the factory he shows us the meticulous method Magnepan uses to source its parts in the US of A. Sixteen sources, eight states, from Mylar to magnets, and one of them five miles down the road from the factory.

Where are your speakers made?

08/31/2026

The myth we hear most about Magnepans, put to the test at the factory that builds them. Thanks to the crew at Magnepan for having us on the floor.

What's something you were told about Maggies that turned out to be wrong? Magnepan Incorporated

08/24/2026

Inside the Chord Qutest: a 49,152-tap WTA1 filter running on a Xilinx Artix 7 FPGA, code by Rob Watts. 124dB dynamic range, 0.0001% THD, up to 768kHz PCM and DSD512.
The light show up top tracks the incoming sample rate, one color for each rate.
Ready for demos in Chestertown or learn more at listenroom.com
Chord Electronics · The Sound Organisation

08/19/2026

Fresh unboxing by the one and only owner of The Listening Room, Mike Hoatson.

The turntable unveiled today is the Rega Planar 8, and Rega engineered it by removing mass rather than adding it. The skeletal plinth is an aerospace foam core between two HPL skins: 30% lighter than the original RP8, and stiffer for it. The whole deck, 4.2 kg (9.3 lb).
Research ·

It’s a good day to visit the Listening Room.
08/15/2026

It’s a good day to visit the Listening Room.

08/08/2026

The brand new Matrix Audio MS-1c music streamer, fantastically fresh unboxing from the incomparable Brian “Woody” Stout . The newest and most accessible entry into the flagship M Series, built on the same streaming hardware platform as the MS-1. Runs Matrix Audio’s own MA Player OS. Built-in DAC, XLR and RCA outputs, 100-step digital volume so you can run straight into a power amp.

🎥 Fidelity Imports USA Brian “Woody” Stout

08/05/2026

The FLS20 SACD. Top-loading transport engineered from scratch to kill vibration. Dual Sabre ES9038PRO DACs running in mono mode. Crystek ultra-low-noise clock. Ten regulated power supplies for the digital stage alone. Three separate toroidal transformers. Handmade in Italy. Your disc collection deserves this.

08/01/2026

Three 8.5-inch carbon-fiber drivers and 1,500 watts, out of a cabinet under six inches deep. The amplifier sits in its own outboard chassis, which is how the part on your wall stays that thin.
That's the Perlisten D3is, rated down to 17 Hz, and Secrets of Home Theater and High Fidelity just gave it a full review.
In the wall or on it?
·

07/31/2026

Most turntables fight vibration with mass. Rega argues the opposite: keep the plinth light, then stiffen only the line that actually matters.
The Planar 3 RS Edition skins that plinth in aluminum and double-braces it into a single stressed beam running from the RB330 tonearm to the main bearing. Rega's new Nd5 cartridge sits on the end of it.
Which Rega turntable is on your upgrade list?Research ·

Address

320 Cannon Street
Chestertown, MD
21620

Opening Hours

10am - 5pm

Alerts

Be the first to know and let us send you an email when The Listening Room posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to The Listening Room:

Shortcuts

Share