Callaway Displays

Callaway Displays Engineering OEM gauge solutions since 2017. Installation Guide: https://www.dropbox.com/s/758a0zcnzuto9b7/installation%20guide.pdf?dl=0

We have a couple let in red and green for anyone still wanting one of these. Clearing out the rest of the stock!
10/06/2025

We have a couple let in red and green for anyone still wanting one of these. Clearing out the rest of the stock!

Currently have 5 in stock! These are normally made to order!
09/06/2024

Currently have 5 in stock! These are normally made to order!

Had to share this awesome project that one of our customers did. He integrated our standard wideband display adaptor int...
01/13/2024

Had to share this awesome project that one of our customers did. He integrated our standard wideband display adaptor into the mirror for a clean oem look! Remember just because we don’t make a bracket for your model doesn’t mean it can’t be retrofitted! I love seeing these custom projects.

Hey guys with recently shown interest I am going to open orders up for the Callaway Displays plug and play adapter for t...
08/30/2023

Hey guys with recently shown interest I am going to open orders up for the Callaway Displays plug and play adapter for the AEM 4100 and 4110 wide band displays! These will be $120 shipped (more for international orders). I will continue taking orders untill the last of my supplies run out. I do only have limited amounts left and are looking to finish off the rest of the supplies so get them while your can! Also feel free to check out and follow my Motorsports Instagram to see my future endeavors! Http://www.Instagram.com/callawayracing

Hey guys I use to make these wideband clock mods that utilize an AEM 4100 or 4110 wideband controller. It has been a cou...
05/31/2022

Hey guys I use to make these wideband clock mods that utilize an AEM 4100 or 4110 wideband controller. It has been a couple years since I have produced these and I am going to do another run due to lots of interest and life no longer being as busy as it was in college when I attempted to do this before. Basically It is a display adapter that will replace the internals of your OEM clock that will plug into a compatible AEM wideband and display out your AFR's where the clock would normally read out! If you have any questions feel free to contact me and I can explain further. The kits cost $80 + Shipping and will include the adapter, instructions and the bracket needed to install it into the clock housing. Available in Green and Red!

https://www.facebook.com/CallawayDisplays

05/16/2022

Looking to gauge interest on doing a new run of wideband display adapters. With potential of allowing more compatibility then just the aem gauges. If you would be interested in one please comment below. If there is enough interest I will finish designing the new model.

05/26/2020

Thank you all for the interest and support over the weekend! I had originally planned on selling off the rest of the available wideband display adapters that I had from a prior order a long time ago. But the posts gained a lot of interest and the batch I had sold out in only a few hours! Since then I had compiled a list of people that still wanted to purchase in order to gain enough interest to place an order of additional board. That list quickly filled as well and I reordered a low quantity batch of boards to fill the demand. There is a limited number of these still available as I do still plan on discontinuing them! If you would like place an order please PM me! Refer to the original post for more information on the wideband display adapter! https://www.facebook.com/CallawayDisplays/posts/2635209576726835

Hey guys I use to make these wideband clock mods that utilize an AEM 4100 or 4110 wideband controller. It has been a cou...
05/22/2020

Hey guys I use to make these wideband clock mods that utilize an AEM 4100 or 4110 wideband controller. It has been a couple years since I have produced these and I am going to do one last run of these before I discontinue making them forever! Basically It is a display adapter that will replace the internals of your OEM clock that will plug into a compatible AEM wideband and display out your AFR's where the clock would normally read out! If you have any questions feel free to contact me and I can explain further. The kits cost $75 + Shipping and will include the adapter, instructions and the bracket needed to install it into the clock housing. Available in Green and Red!

https://www.facebook.com/CallawayDisplays/

11/26/2017

Still have some inventory in stock! Contact us via our page to place an order!

09/08/2017

We have limited supply of wideband display adapters left and most likely will not be restocking! Get yours while they are still in stock!

Address

Ann Arbor, MI

Website

Alerts

Be the first to know and let us send you an email when Callaway Displays posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Share