RadiØKit

06/21/2018

Gibt es hier: http://stores.ebay.de/radi0shop Infos gibt es hier im Forum: http://www.radi0kit.com/radi0forum/index.php Dank an Yiannis SV1EEZ

05/21/2017

RadiØKit-2 is a kit that will help you transform your normal receiver to a SDR radio. It works with all receivers and ham radio transceivers that have a 455 KHz second IF. It makes it possible to listen to DRM, SSB and other broadcasts from a normal shortwave receiver.
You may order it from our web site https://goo.gl/urJD3q (cheaper option) or from our eBay shop https://goo.gl/iIjUuM

09/11/2016

RadiØKit-120 is the last in our RadiØKit-1 series. Like the other kits in the series is a CW transceiver for the 20m band. All components and detailed instructions and schematics are included. See it here: http://goo.gl/R8MHok

11/05/2015

Our new tube amplifier kit is close to completion. Some photos from the lab tests...

10/17/2015

http://www.audioasylum.com/audio/tubes/messages/26/265255.html

Radi0Kit RK318 tube MM phono kit - mwhouston - Tubes Asylum

06/11/2015

http://diyaudioprojects.com/Forum/viewtopic.php?f=9&t=5226

Welcome to the DIY Audio Projects Message Forum. Use these forums to discuss Hi-Fi audio and to share your DIY Audio Projects. Registration is free and required to post messages and view the file attachments. Registration will only take a minute and registered users do not see any advertisements. Af…

04/19/2015

I've been toying with the idea of getting an Elecraft K1, but the price and given that I'm not comfortable with CW is a show-stopper. I've also been looking for a tiny multi band kit, but the ones...

04/15/2015

We are in the process of finalizing our new tube audio amplifier kit. The need for a 8 ohm dummy load arose. So we decided to build our own. We had most of the parts and all we needed were high quality non inductive resistors. Dale's NH-50 8 Ohm 50W 1% resistors were chosen and connected in series and parallel combination in order to achieve a 8 Ohm 200W load per channel. All the components were installed in an aluminium box and an extra bnc connector per channel was installed for connecting the oscilloscope and any other instruments needed. The final results were measured with our new Keysight U1733C LCR meter. Enjoy our photo album with all the steps of the construction. If you want anything to ask please do it in the comments. We can construct this audio dummy load for you if you like it. Next step is the construction of a 4 Ohm dummy load using film resistors.

03/25/2015

Enjoy some photos we took during the construction and testing of a complete RK-318 MM phono preamp with it's power supply. We hope you like them.

03/25/2015

RadiØKit PS-318 is a power supply kit for the RK-318 kit series. It provides stabilized heater voltage and electronicaly smoothed high tension voltage. It supports both 240 and 120 V AC input. Transformer and mounting hardware are included. You can see it here: http://www.freebytes.com/catalog/product_info.php?cPath=259_283&products_id=1674&language=en

03/25/2015

RadiØKit RK-318 Value uses the same schematic as RadiØKit RK-318 but the components are chosen for quality at lower prices. It is ideal for a novice to mid experienced diyer who wants a RIAA preamp that has real value for money. See it here: http://www.freebytes.com/catalog/product_info.php?cPath=259_283&products_id=1673&language=en

03/25/2015

RadiØKit RK-318 is our first kit to address the needs of diy audio enthusiasts. It's a moving magnet phono head preamplifier based on ECC83. The components used are of highest quality and the tubes are made by JJ electronic. See it in more details here: http://www.freebytes.com/catalog/product_info.php?cPath=259_283&products_id=1675