Nick miner

Nick miner mine crypto

CMP 170HX 是經過重新設計的 NVIDIA A100 加速器,它沒有顯示連接器,也沒有遊戲功能。
06/09/2021

CMP 170HX 是經過重新設計的 NVIDIA A100 加速器,它沒有顯示連接器,也沒有遊戲功能。

CMP 170HX, NVIDIA’s own mining card Most CMP (CryptoMining Processor) cards were based on board partners’ design, but CMP 170HX is an exception. New photos featuring the design have been shared on Zhihu by Codefordl. NVIDIA CMP 170HX, Source: Codefordl Some of our readers might remember that we ...

04/09/2021

Linux 的 Load Average 的數字代表有多少個 process 在等待 CPU 及 DISK I/O 等資源運算,如果是 1 表示有一個 process 正在執行或等待 CPU 運算;5 表示有 5 個 process 正在執行或等待 CPU 運算,一台完全閒置的電腦,其 Load Average 是 0.
這個 Load Average 數值可以簡單地這樣看待,對於一台只有一個核心的單處理器系統,Load Average 為 1.03 時表示系統超載 3%,如果是 0.8,表示系統並未超載,只用了 80%.

那究竟 Load Average 在甚麼水平才算高呢?以前在一個外國論壇看到這個講法,我也一直沿用:

Load Average 長期超過 0.7: 原則上系統沒有甚麼問題,但這個時候也應該檢查一下,看看究竟是硬件需要升級,還是有其他甚麼原因。
Load Average 長期超過 1.0: 這時系統執行上還十分暢順,但應該盡快檢查系統的問題。
Load Average 長期超過 5.0: 要立即檢查問題,不然半夜三更當機,那便會十分麻煩。

當然如果系統只是短暫時間到達以上數值,這個問題不太,只要不是長時間便好。

但對於一台有多夥 CPU 的系統,計算方法便有所不同了,而且現在的 CPU 都已經是多核心,所以不可以單看 Load Average 的數值。例如系統內 CPU 是四核心,那麼 Load Average 到達 4 才是 100% 負載。以上面的算法,以一台有單夥四核心處理器的伺服器,我會在 Load Average 長期超過 3 時檢查那裡出現問題。

用 uptime 查看 Load Average 時,會有三個數值,它們從左至右分別代表 Load Average 時段是:最近 1 分鐘, 最近 5 分鐘, 及最近 15 分鐘。原則上第一個數值的意義不大,因為那只是最近 1 分鐘的 Load Average,要監測系統的負載,第 2 (過去 5 分鐘) 及第 3 個 (過去 15 分鐘) 數值的意思更大。

除了 Linux 外,其他 Unix Like 環境,例如 Mac 也可以執行 uptime 查看系統的 Load Average,或者如果像 Router (DD-WRT 可以看到) 這類裝置,如果有提供這個功能的話,也可以查看它的 Load Average。

Cryptocurrencies now recognized under commercial law in Texas
04/09/2021

Cryptocurrencies now recognized under commercial law in Texas

Texas H.B. 1576 establishes a blockchain working group in the state while H.B. 4474 amends the Uniform Commercial Code to recognize cryptocurrencies under commercial law.

Address

Hualien City

Alerts

Be the first to know and let us send you an email when Nick miner posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Share