DADAŞ İLETİŞİM GSM TEKNİK SERVİS

17/07/2021

100% NATURAL PERGA (arı ekmeği) KG.FIYATI 800 TL KENDİ URETIMIM

22/07/2017

HER MARKA TABLET DOKUNMATIK VE EKRAN DEGISIMI YAPILIR.....

22/07/2017

Her marka TABLET pc DOKUNMATIK ve ekran DEGISIMI YAPILIR

13/07/2017

TABLET DOKUNMATIK DEGISIMI YAPILIR

23/03/2012

Playstation Tamiri, Xbox, Wii, oyun konsolu tamiratı yapılır....

08/02/2012

DADAŞ İLETİŞİM GSM TEKNİK SERVİS YAZILIM ATARKEN GÖÇEN SAMSUNG HTC sony ericsson VE ANDROİD YAZILIM OLAN CİHAZLAR JTAG YÖNTEMİ İLE BOOT REPAİR YAPILIR......

08/02/2012

Resurrecting HTC Incredible 2 (Droid Incredible 2 ADR6350VW) is easy. Phone is auto powered on with USB Data Cable connected to the PC while battery is connected.
Some (or all) revisions of HTC Incredible 2 boards have JTAG interface disabled (that is enable MARM JTAG Fuse is blown in the MSM8655 chip). In this case the JTAG may be enabled only by firmware itself. This is done by the FSBL loader, so writing to FSBL area is artificially disabled in the DCC Loader code. DCC Loader will discard all flashing attempts into FSBL zone and will respond with success code as if flashing succeeded. In this way FSBL zone is protected while user still can flash full image files seamlessly.
Resurrector will reflash radio’s boot zone (except FSBL area) and will re-write PDA’s SPL version 6.13.1002. Additionally to SPL and Radio zones, the zone which contains Model ID is re-flashed too. Thus after resurrection phone will have Model ID = ‘PG3210***’.
There is option to reflash BOOT and RECOVERY zones.
Please note, if your phone has the FSBL loader damaged and MCU has JTAG FUSE blown then there is no way to resurrect your phone via JTAG interface.

17/11/2011

i9000 boot repair ok yazılımda çökmüş cihazlara boot ile tamir....

03/11/2011

http://www.youtube.com/watch?v=UYak1H2wjE4

10/09/2011

Tablet dokunmatik ekran rom, rot yapılır

02/06/2011

http://www.youtube.com/watch?v=SkacahW5kJA

02/06/2011

http://www.jtagbox.com/2011/05/

Please click “Check For Updates” button in order to download and apply new files. Closing all running application before starting update process is recommended.