https://www.facebook.com/1716738808559862/

Bonbon-Electronics, السودان, Khartoum (2026)

05/01/2016

Mega 2560 R3 (latest Revision):
PRICE TO SALE-(420.00 SD).

Arduino SUDAN now stocking the latest Arduino Mega Revision 3. The arduino Mega R3 is backwards compatible with the arduino mega - same driver, same uploading, same look and work with the existing shields but can adapt to new shields.

:

The Arduino Mega 2560 is a microcontroller board based on the ATmega2560. It has 54 digital input/output pins (of which 14 can be used as PWM outputs), 16 analog inputs, 4 UARTs (hardware serial ports), a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button.

Features for Arduino Mega R3:

The Mega 2560 R3 adds SDA and SCL pins next to the AREF.
In addition, there are two new pins placed near the RESET pin. One is the IOREF that allow the shields to adapt to the voltage provided from the board. The other is a not connected and is reserved for future purposes.

05/01/2016

DATESHEET aduino UNO R3

05/01/2016

Arduino Uno R3 (Latest Revision) - Clone
PRICE TO SALE-(200.00 SD)

arduino UNO R3 is backwards compatible with the UNO - same driver, same uploading, same look.

:

There are a few changes in the UNO, here is what they are
ATmega16U2 instead of the 8U2 found. This allows for faster USB transfer rates.
No drivers needed for Linux or Mac (.inf file for Windows is needed and included in the Arduino IDE)
The ability to have the Uno show up as a keyboard, mouse, joystick, etc.
New SDA and SCL pins next to the AREF. this is a duplication of the Analog 4 and 5 pins.
Two new pins placed near the RESET pin. One is the IOREF that allow the shields to adapt to the voltage provided from the board. The other is a not connected and is reserved for future purposes.
Reset button moved from center of board to corner near USB connector, allowing resets when shields are connected.
Larger heat sink copper area for the LM117 regulator

05/01/2016

USBasp is a USB in-circuit programmer for Atmel AVR controllers. It is based on Thomas Fischl's USBasp design project. The USB interface is achieved by using an atmega8 processor and the rest is done in firmware.

The firmware are free to load from USB in-circuit programmer for Atmel AVR controllers. It is based on Thomas Fischl's website. You can download Windows drivers from here, so you can use them on Windows Vista and above without any issues. The driver will work on both 32 and 64 bit platforms. For Linux and Mac OS X no driver is required, just use AVRdude and specify the correct port.

The AVR programmer will work with a wide variety of Atmel AVR microcontrollers including the Atmega8a and Atmega168a. A list is available of supported microcontrollers are shown below.

:

Allows you to read or write the microcontroller EEPROM, firmware, fuse bits and lock bits
Support for Windows, Mac OS X and Linux
5 KB/sec maximum write speed
Software controlled SCK option to support targets with low clock speed (< 1.5MHz)
10 pin ISP interface (conforms to standard ISP 10-pin pinout)

Software:

AVRdude - Version 5.2 or later. AVRdude is available for many platforms.
Khazama AVR Programmer - An AVRdude GUI for MS Windows
BASCOM-AVR - Version 1.11.9.6 or later
eXtreme Burner - An easy to use GUI application for MS Windows.

#(Kit Includes):

1x USBasp programmer
1x 10 pin ISP cable

Microcontrollers:

ATmega8 ATmega8A ATmega48 ATmega48A ATmega48P ATmega48PA ATmega88
ATmega88A ATmega88P ATmega88PA ATmega168 ATmega168A ATmega168P ATmega168PA
ATmega328 ATmega328P ATmega103 ATmega128 ATmega128P ATmega1280 ATmega1281
ATmega16 ATmega16A ATmega161 ATmega162 ATmega163 ATmega164 ATmega164A
ATmega164P ATmega164PA ATmega169 ATmega169A ATmega169P ATmega169PA ATmega2560
ATmega2561 ATmega32 ATmega32A ATmega324 ATmega324A ATmega324P ATmega324PA
ATmega329 ATmega329A ATmega329P ATmega329PA ATmega3290 ATmega3290A ATmega3290P
ATmega64 ATmega64A ATmega640 ATmega644 ATmega644A ATmega644P ATmega644PA
ATmega649 ATmega649A ATmega649P ATmega6490 ATtiny12 ATtiny13 ATtiny13A
ATtiny15 ATtiny25 ATtiny26 ATtiny85 ATtiny2313 ATtiny2313A

05/01/2016

USBASP AVR Programmer:
price to sale-(180.00 SD)

04/01/2016

2.4GHz Wireless Transceiver nRF24L01 (60 meters range):

nRF24L01, The 2.4GHz Wireless Transceiver from Nordic Semiconductor. This low cost, light weight wireless module has amazing capabilities.The antenna is built in. It has 125 selectable channels , very low power transmistion and can transmit data in range of 60 meters or more. It can work with Arduino boards or microcontrollers. The wireless module has many applications starting from robots remote control to sensors wireless sensing.

04/01/2016

Coin Acceptance Module:

With the coin acceptance module you can build your own vending machine or arcade. This coin acceptor will take three different kinds of coin! The sensors in this coin acceptor use the thickness, diameter and fall time of the coins to identify them and it’s fully programmable so you’re not limited to any particular type of currency. You can use this module with arduino or any other controller.

04/01/2016

Fingerprint Scanner – Serial TTL:

Would you like to identify a person by his finger print? Why? For security, electrions, work attandance and many other applications. Now you can using Fingerprint Scanner.

This great fingerprint module from ADH-Tech taiwan that communicates over TTL Serial so you can easily embed it into your next project.The module itself does all of the heavy work behind reading and identifying the fingerprints with an on-board optical sensor and 32-bit CPU. All you need to do is send it simple commands.

The fingerprint scanner can store up to 20 different fingerprints and with its serial TTL output, can be easily integrated to your micro-controller or Arduino

04/01/2016

IOIO-OTG for Android (ADK):

IOIO is a bridge between Android devices and external hardware such as sensors and servos. IOIO enables you to add the computational power, touch display, connectivity, and built-in sensors (camera, GPS, accelerometer) of Android to your projects. IOIO can connect to any standard Android device (as early as Android 1.5) over both USB and Bluetooth.

04/01/2016

3 Axis Stepper Motor Driver (3.5 A):

Check our new 3 axis stepper motor driver with microstepping capability and built in breakout board. It is MACH3 compatible with complete data and Mach setting example.

04/01/2016

Barcode Scanner (USB Interface):

Decode nearly any kind of 1D (striped) barcode in your project using this compact barcode scanner.

04/01/2016

Welcome to BonBon- Electronics (Arduino Sudan).:

BonBon- Electronics (Arduino Sudan). is a leading electronic components distributor in sudan. We help the customers from businesses to educational institutions to hobbyists and along the way we’re proud to have built a solid reputation for great prices, great selection, and a great source for hard-to-find electronic components.

Future Electronics Egypt (Arduino Egypt) is a perfect supplier for both industrial compenents and engineering projects. We are Arduino italy authorized distributor insudan ( Arduino sudan). We provide also the biggest collection of sensors, motors, kits, robot kits, RF modules in sudan. Our focus is not only on the selection of what the sudanese electronics market needs, but also we drive the electronics world in Egypt to be on the same foot with the international market.

In Arduino sudan, We do not only do our job, We enjoy doing it

Bonbon-Electronics

05/01/2016

05/01/2016

05/01/2016

05/01/2016

05/01/2016

04/01/2016

04/01/2016

04/01/2016

04/01/2016

04/01/2016

04/01/2016

04/01/2016

Address

Website

Alerts

Shortcuts

Share

Category