21/06/2022
๐๐๐๐๐ ๐๐๐๐ ๐๐๐ ๐๐ฅ๐ฎ๐๐ญ๐จ๐จ๐ญ๐ก ๐๐๐ซ๐ฉ๐ก๐จ๐ง๐ ๐๐ข๐ ๐ก ๐๐ญ๐๐ซ๐๐จ ๐๐จ๐ฎ๐ง๐ ๐๐ฎ๐ซ๐ ๐๐ข๐ซ๐๐ฅ๐๐ฌ๐ฌ ๐๐๐ซ๐ฉ๐ก๐จ๐ง๐ ๐๐จ๐ฎ๐๐ก ๐๐จ๐ง๐ญ๐ซ๐จ๐ฅ ๐๐๐ซ๐๐ฎ๐๐ฌ
Bili na kayo idol hanggat may stock pa, Goods na goods pang gaming
๐ Shopee: https://invle.co/clbcec3
๐ข๐ข๐ขInstructions for Use:
Connect
1. Open the upper cover of the earphone charging compartment, and the earphone will automatically turn on.
2.Turn on the phone: Settings>Wireless and Network >Bluetooth>Open: Enable>Scan for device. (The menu may different due to different equipment)
3. Select "BAVIN-19", After the mobile phone shows successful connection, it can be used.
FUNCTION DEFINITION DESCRIPTION
โ Function definition in the call state
Incoming call headset prompts mobile phone ringtones (os), Android system prompts: "di" "di" "di"
โกAnswer calls
Tap 1 main/secondary ear to answer (both main and secondary ears can be used)
โขHang up the phone
Tap 2 main/secondary ears to answer (both main and secondary ears can be used)
โฃReject the call
Long press for 1 second, the main and auxiliary ear buttons refuse to answer the call (the main and auxiliary ears can be used)
Function definition in music state
Play/Pause: Click (left/right ear)
Previous song/Next song: Triple click on the left ear for the previous song, triple click on the right ear for the next song
Volume down/Volume up: Double click left ear volume down double click right ear volume up
VOICE ASSISTANT
โ Wake up "siri"
Long press the touch area for 2 seconds and then let go and wake up after the beep sound prompt (Apple and Android are the same)
โกMaster-slave switch
The left and right ears can be connected back to the mobile phone at will, freely switch, and the phone can be connected in seconds after power on
Product Safety Information:
1.Why product cannot be turned on?
Answer: when using your product at the first time, please check and make sure the product battery is fully charged. If the battery runs out of power, your earphone may not be turned on.
2. The earphone is silent during playback?
Answer: check for a valid connection between the mobile phone to your earphone. If the device is not properly connected, please reconnect it. Meanwhile, please also adjust the volume in mobile
phone of your earphone to a proper level.
3. The mobile phone cannot find the Bluetooth headphone, the Bluetooth connection is unstable of disconnected during use, thus resulting in unsmooth
sound/interruption.
(1).Please do not exceed the Bluetooth connection distance of the mobile phone, so as to avoid interference from the wall of the human body;
(2).Please ensure that the battery level of the earphone and the charging box are sufficient;
(3).Please put the earphone into the box and close the cover, open the cover after 15 seconds and remove the earphones from the charging box. The earphone will automatically connect with the
mobile phone;
(4).If the above operation still cannot be connected, please insert the earphone into the charging box and re-pair the connection.
4. When thereโs an incoming call, tap the earphone to answer and the sound is output from the Bluetooth earphones; Slide from the phone screen to answer, some phone brands will output sounds from the handset, and some from the bluetooth headphone?
Answer: due to the different mobile phone systems, tapping the headphone to answer incoming calls will be output from the Bluetooth headphones; however, when answering the call by sliding the mobile phone screen, different sound output channels will occur due to different logic processing of the operating systems.
5. What should I do when I lost one earphone?
Answer: if you lose one earphone, you canโt buy another one for use together. You need to buy another pair for use.
Brand: Bavin
Model: BA19
Connector : Bluetooth5.0
Built-in Microphone
