EJA Electronic Arts

29/03/2026

For sale

ROGERS LS7t

Key Specifications & Details

Type: 2-way reflex-loaded monitor

Drive Units: 200mm (8") polypropylene woofer, 25mm (1") titanium-dome tweeter

Frequency Response: 55Hz - 22kHz $\pm$2dB

Sensitivity: 88dB/W/m

Nominal Impedance: 8 Ohms

Recommended Power: 15W Minimum

Maximum Program Power: 200 Watts

Crossover Frequency: 3kHz (Third-order, 18dB/octave)

Dimensions (HWD): 559 x 273 x 280 mm (22 x 11 x 11 inches)

Weight: ~15kg (38 lbs per pair, though some sources mention higher, ~25kg)

Construction: 12mm bituminous damped MDF with 19mm front baffle

29/03/2026

For sale NHT SB3

The NHT SB3 is a 2-way acoustic suspension bookshelf speaker (circa 2002) featuring a 6.5" polypropylene woofer and a 1" fluid-cooled aluminum dome tweeter. It is known for a 39Hz-22kHz frequency response, 86dB sensitivity, and 8-ohm impedance, designed for 15-175W amplification. They are housed in a high-gloss black finish.

10/02/2026

Yamaha R-S202

Tuning range: FM, MW

Power output: 100 watts per channel into 8Ω (stereo)

Frequency response: 10Hz to 100kHz

Total harmonic distortion: 0.2%

Input sensitivity: 500mV (line)

Signal to noise ratio: 100dB (line)

Output: 500mV (line)

Speaker load impedance: 8Ω (minimum)

Dimensions: 435 x 141 x 322mm

Weight: 6.7kg

Finish: black, silver

Accessories: RAX33 remote control

Year: 2016

26/09/2025

Ingwar Sphis

German made
4 - 8 ohms
80 watts

Speaker cable included

13/02/2025

SOLD

13/02/2025

The Neat Critique 2 is a compact, two-way bookshelf speaker from Neat Acoustics, featuring a single 100mm polypropylene cone driver for mid-bass and a 50mm vertical planar magnetic ribbon tweeter, known for its fast, detailed high-frequency response; housed in a 2.6 liter, internally damped MDF cabinet with a bass reflex design.

Key Specs:
Driver Configuration: 1 x 100mm polypropylene cone woofer, 1 x 50mm planar magnetic ribbon tweeter

Enclosure Type: Bass reflex

Impedance: 6 ohms

Sensitivity: 84dB/W/m

Frequency Response: 45Hz - 30kHz

Recommended Amplifier Power: 25 - 100 watts

Cabinet Material: High-grade MDF

Finish Options: Satin White, Satin Black, Flame Red, Zinc Yellow, Ultramarine Blue

27/12/2024

27/12/2024

For sale

KEF RDM2

SPECS:

Description: Two-way, reflex-loaded, magnetically shielded, stand-mounted loudspeaker. Drive-units: 1" fabric-dome tweeter concentrically mounted in 5" polypropylene-cone woofer with a rubber butyl rubber suspension. Crossover frequency: 2.1kHz. Frequency response: 80Hz-18kHz, ±2dB (-6dB at 65Hz). Nominal impedance: 6 ohms. Sensitivity: 90dB/2.83V/m. Maximum output: 112dB. Amplifier requirements: 30-175W.
Dimensions: 13.2" H by 9.3" W by 10" D. Weight: 18.3 lbs each.
Finish: Gray Nextel with gloss gray

20/08/2024

Good morning