Auto Accessories NZ

Auto Accessories NZ Precision auto-electrical installs. No hacks. No mess. Just clean work. Auto Accessories NZ οΏ½

 brought his Subaru Impreza GT in to us for a single Turbosmart boost gauge install. πŸ’―πŸ‘πŸ½Customer was satisfied with the ...
10/06/2026

brought his Subaru Impreza GT in to us for a single Turbosmart boost gauge install. πŸ’―πŸ‘πŸ½

Customer was satisfied with the end product and our workmanship. We do things the right and professional way. πŸ”₯

Get in touch with us nowπŸ‘πŸ½

 came in for a Oil + Filter service package . We then got that done πŸ”₯ this one wasn’t documented the best but here are s...
05/06/2026

came in for a Oil + Filter service package . We then got that done πŸ”₯ this one wasn’t documented the best but here are some photos + rough pics taken along the process. Customer was really satisfied with our service and left a positive feedback. πŸ‘πŸ½πŸ”₯

Get in touch with us for our quality work πŸ™ŒπŸ½πŸ’―

Behind the scenes of getting  β€˜s pillar gauge setup ready  ! πŸ’― this amazing piece is going to be shipped to Christchurch...
30/05/2026

Behind the scenes of getting β€˜s pillar gauge setup ready ! πŸ’― this amazing piece is going to be shipped to Christchurch .. we have done wire extensions, sensor and sandwich plate prep as well as custom drilled buttons for the 52mm settings menuπŸ”₯

That being said, we can send it to you anywhere anytime. Feel free to msg us to get yourself an amazing piece.πŸ‘πŸ½πŸ™πŸ½

 came in to get a boost gauge installed for his MPS3 GEN2. 🀝πŸ”₯ amazed at how well I managed to get this one done in under...
29/05/2026

came in to get a boost gauge installed for his MPS3 GEN2. 🀝πŸ”₯ amazed at how well I managed to get this one done in under 45 minsπŸ™ŒπŸ½

Popped the bonnet, firewall pe*******on within minutes as rubber grommet was literally clip in and out, T pieced vacuum line for boost sensor from the bov hose. Ziptied and secured sensor with filter sensor and engine bay work was neat and done to professional standard πŸ”₯πŸ’―

Popping off the radio , and dash above it took a few mins, we routed the cable neatly and wired it up; constant, acc/ignition, illumination and ground. πŸ”₯πŸ’―

Car gauge dims and works to full functionality. Excited to see more MPS3 GEN2’s in the near future πŸ€πŸ™ŒπŸ½

Customer brought his Holden commodore ZB to us for a twin pillar gauge install. πŸ‘€πŸ”₯ we also had a wireless magnetic radar...
22/05/2026

Customer brought his Holden commodore ZB to us for a twin pillar gauge install. πŸ‘€πŸ”₯ we also had a wireless magnetic radar detector mount for an install. Anyway we got to it. πŸ’―

1x boost gauge & 1x volts gauge and a wireless radar detector mount. Both wired up to professional standard☝🏽 The outcome of the job was fabulous.

Usually with the universal pillars for these gauges it is hard to get the fitment good but for this car it turned out perfect and flush. Customer was satisfied πŸ’―

A late one but.. here’s a HKS intake upgrade for .mainz 2016 S4 πŸ”₯ This was a mobile πŸ“² job so we had made it out and did ...
21/05/2026

A late one but.. here’s a HKS intake upgrade for .mainz 2016 S4 πŸ”₯

This was a mobile πŸ“² job so we had made it out and did the job remotely ! The job was a success, we accounted for every part of+ bolt with a perfection of a install. MAF sensor was put in and car started with no issues.

We can almost do anything - pm us for any general inquiries / quotations. Thanks for the support πŸ™πŸ½πŸ’―

This beautiful Rsb legacy (owner: .rsb_96 ) came in for a regular dash mount setup. πŸ”₯ gauges were boost, oil pressure & ...
07/05/2026

This beautiful Rsb legacy (owner: .rsb_96 ) came in for a regular dash mount setup. πŸ”₯ gauges were boost, oil pressure & temp. We made it happen

Of course every job has its flaw.. regardless we got it done with outstanding results. I ran the wires along the vent all the way down to the clutch but it looked too messyπŸ˜† so I drilled a small hole enough to make 4 wires fit through the gap and neatly zip tied everything.

Get in touch with us to get some work done😎☝🏽

 brought his V11 STI in for some gauge installations. We first ordered his supply and once received, we got to it. πŸ”₯😎 he...
01/05/2026

brought his V11 STI in for some gauge installations. We first ordered his supply and once received, we got to it. πŸ”₯😎 he is running a boost / oil temp / oil pressure combo πŸ”₯

We were creative with wiring routes as customer wanted gauges on an area that is uncommon. We got to it and still delivered with amazing results πŸ’―

Power sourced from head unit loom via constant, ign, dimmer & ground. Pressure sensor connected via earth and G . Boost solenoid via vacuum sensor & oil temp by 2 strand temp . Customer was definitely satisfied and gave amazing feedback. (Check our reviews highlight) πŸ™πŸ½

Get in touch with us NOW βœ…

02/04/2026

Fresh service on the Hilux πŸ”§
Running smooth, ready for anything πŸ’ͺ

Eid Mubarak πŸŒ™πŸ•‹ from us at Auto Accessories NZ. Blessed festivities to everyone ❀️ bookings are closed for the weekend, a...
20/03/2026

Eid Mubarak πŸŒ™πŸ•‹ from us at Auto Accessories NZ.

Blessed festivities to everyone ❀️ bookings are closed for the weekend, any small jobs can make time Sunday onwards. Keep in touch and have a blessed Eid 🫢🏽

Address

Auckland

Website

Alerts

Be the first to know and let us send you an email when Auto Accessories NZ posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share