What are the opening hours?

Monday 10:00 - 21:00 Tuesday 10:00 - 21:00 Wednesday 10:00 - 21:00 Thursday 10:00 - 21:00 Friday 10:00 - 21:00 Saturday 10:00 - 21:00 Sunday 10:00 - 21:00

Jeff Rowland Malaysia, CMY Audio & Visual F011/F016, First Floor, Sungei Wang Plaza, Jalan Sultan Ismail, Kuala Lumpur (2026)

01/11/2023

Jeff Rowland Continuum S2
Featuring enhanced sonic performance and flexibility, the new Rowland Continuum Series 2 integrated amplifier delivers stunning dynamic realism and expressive refinement through advanced topologies. Continuum S2 integrates the new Capri S2 preamplification circuit, input/output, and control features with an innovative 400 watt power amplification stage into a single chassis.
The amplifier delivers the trademark Rowland musicality, resolution, and unfailing authority to the most refined audio environments: challenge Continuum S2 to the extreme dynamics of high-resolution digital sources and the power requirements of large bi-wired speakers. Apply it to the complex loads of electrostatic panels in analog rigs. Admire its exceptional realism driving single-wired studio monitors in a sophisticated multi-media system.
The elegance of Continuum S2’s ergonomic console emerges from a solid block of aircraft-grade aluminum. Discover the impressive complement of standard input/output interfaces. Enhance its flexibility through the optional DAC card, or its fully redesigned phono stage.

15/06/2023

Jeff Rowland Model 312 Stereo Power Amplifier
Features
▪️XLR input connectors for balanced system configuration.
▪️RCA input connectors for unbalanced system configurations.
▪️Dual Speaker Output Terminals on each channel for bi-wiring applications.
▪️User selectable switching between balanced and unbalanced connections.
▪️Transformer coupled inputs provide universal compatibility with other components and eliminate ground loop noise and EMI.
▪️High efficiency ICEpower@ power conversion technology generates high output power with very little heat.
▪️Fully-balanced topology implemented in both input and output circuitry.
▪️Power Factor Correction (PFC) in power supply reduces AC line harmonic noise pollution and increases AC line power utilization to 99%.
Proprietary switch-mode power supply technology ensures consistent performance under all operating conditions.
12V remote ON/OFF remote power switching via 1/8” jack on rear panel.
Standby power mode reduces warm-up time.
CE approved speaker output terminals require no tools for secure, low resistance connections.
Fail-safe operation provided by user-resetable thermal circuit breaker located on rear panel.
Quiet, transient-free operation during power ON/OFF and input configuration switching.
Selectable overall gain of 26 or 32 dB.
Ultra-low resonance, structurally rigid chassis, precision-machined from a solid block of aircraft grade 6061-T6 aliminum.
3-point self-leveling chassis support.

19/10/2022

Jeff Rowland Corus Pre Amplifier (Made In USA)✅
RM47,905.00🔥🔥
Features 🎉
◾️ULTRA LOW RESONANCE CHASSIS
Balanced preamplifier design housed inside twin ultra-low resonance, structurally rigid chassis precision-machined from solid ingots of aircraft grade 6061-T6 aluminum, completely sealed for trouble-free operation, yield maximum electrical/EMI/RF isolation.
◾️DIAMOND SCULPTED FRONT PANEL
Matching front panels precision-machined and sculpted with a diamond tipped cutting tool into a uniquely elegant prismatic curved design.
◾️FUNCTIONAL ISOLATION
Power supplies and microprocessor-based system control circuits confined inside control chassis. Sensitive audio circuits isolated in audio chassis. Left and right subsystems further isolated into individual milled Aluminum pockets in true dual mono design for ultimate RF and EMI shielding.
◾️FREE OF INTERNAL SIGNAL POLLUTION
Control subsystem taken completely offline after each command ex*****on to maximize sound purity.
◾️MULTI-REGULATED AC SMPS
High speed switch mode power supply (SMPS) developed for aerospace applications incorporates passive power factor correction (PFC) for sonic performance so pure and musical that is virtually invariant to power cords.
◾️CERAMIC BOARDS
Circuits implemented on military-grade 4-layer ceramic boards for minimum energy retention. Boards further sport numerous grounding points for extended internal star-grounding.
◾️SHORTEST SIGNAL PATH
Gain stages based on ultra-low noise advanced TI Burr brown OPA1632 differential balanced audio amplifiers are implemented into shortest signal path of any Rowland reference preamplifier.
◾️DUAL ZONE PREAMPLIFICATION
Separate 2nd gain stage for record outputs sports own OPA-1632 modules and independent volume.

14/10/2022

Jeff Rowland Capri S2 Pre Amplifier
(Made In USA) ✅
🔥RM14,660.00🔥
Features 🎉
◾️The Capri S2 features an impressive complement of standard input/output interfaces; greatly enhanced flexibility through its optional DAC card or phono option; and the Rowland trademark prismatic platinum faceplate beautifully integrated into a non-resonant chassis milled from a solid block of aluminum.
◾️With an output impedance of only 80 Ohms balanced and 40 Ohms single ended, Capri S2 drives any amplifier with confidence. Whether serving a single-ended triode amplifier in a vinyl rig, or controlling a quartet of solid-state Rowland M525 monoblocks with a 192 kHz digital source, or at the nexus of a home theater setup, the Capri S2 preamplifier delivers the trademark Rowland musicality, resolution, and consistent authority.

22/08/2022

Jeff Rowland Corus Pre Amplifier
(Made In USA) ✅
🔥RM47,905.00🔥
Features 🎉
◾️ULTRA LOW RESONANCE CHASSIS
Balanced preamplifier design housed inside twin ultra-low resonance, structurally rigid chassis precision-machined from solid ingots of aircraft grade 6061-T6 aluminum, completely sealed for trouble-free operation, yield maximum electrical/EMI/RF isolation.
◾️DIAMOND SCULPTED FRONT PANEL
Matching front panels precision-machined and sculpted with a diamond tipped cutting tool into a uniquely elegant prismatic curved design.
◾️FUNCTIONAL ISOLATION
Power supplies and microprocessor-based system control circuits confined inside control chassis. Sensitive audio circuits isolated in audio chassis. Left and right subsystems further isolated into individual milled Aluminum pockets in true dual mono design for ultimate RF and EMI shielding.
◾️FREE OF INTERNAL SIGNAL POLLUTION
Control subsystem taken completely offline after each command ex*****on to maximize sound purity.
◾️MULTI-REGULATED AC SMPS
High speed switch mode power supply (SMPS) developed for aerospace applications incorporates passive power factor correction (PFC) for sonic performance so pure and musical that is virtually invariant to power cords.
◾️CERAMIC BOARDS
Circuits implemented on military-grade 4-layer ceramic boards for minimum energy retention. Boards further sport numerous grounding points for extended internal star-grounding.
◾️SHORTEST SIGNAL PATH
Gain stages based on ultra-low noise advanced TI Burr brown OPA1632 differential balanced audio amplifiers are implemented into shortest signal path of any Rowland reference preamplifier.
◾️DUAL ZONE PREAMPLIFICATION
Separate 2nd gain stage for record outputs sports own OPA-1632 modules and independent volume.
◾️TRANSFORMER-COUPLED
All inputs and outputs coupled to identical custom wound Lundahl transformers for maximum noise rejection and cross-component compatibility. Transformer coupling also ensures invariant gain for balanced and unbalanced devices. Flexible connectivity: 6 inputs (4 XLR balanced, 2 RCA unbalanced); 4 main outputs (2 XLR balanced, 2 RCA unbalanced); 2 record outputs (1 XLR balanced, 1 RCA unbalanced).
◾️INPUT GAIN OFFSETS
Hi resolution independently programmable gain offset on each main input ranging from -10dB to +10dB in 0.5dB increments–. Output offset: hi resolution programmable gain offset on main unbalanced input 2 with 0.5dB resolution.
◾️UNITY GAIN INPUTS
All main input configurable as unity gain bypass for compatibility with theater processors.
◾️PHASE INVERSION
Independent signal phase inversion control on left and right channels for optimum speaker setup and system checks.
◾️CHANNEL BALANCE
Hi resolution (1.0dB) panning of stereophonic image (channel balance) for a maximum +/-20dB shift.
◾️VFD
Long life graphic vacuum fluorescent display (VFD) for system control. Remote control: Highly ergonomic, custom remote control transmitter milled from Aluminum billet supports complete system control and duplicates front panel operations.
◾️REMOTE SENSOR
Wired remote sensor milled from Aluminum billet enables Criterion’s control while housing preamplifier in closed cabinet enclosures.
◾️PRECISION VOLUME ADJUSTMENTS
Dual rate volume control allows precision level adjustments over nearly a 100 dB range. The volume control incorporates a permanently noiseless optical encoder that always maintain its tactile feel, accuracy, and channel balance at all settings. The volume can be adjusted from 0dB to 99.5dB from the multi-role control k**b on the front panel, as well as from the multi-function remote control. Rapid turns of the control k**b adjust the volume by 1.5dB increments. Slow turns of the control allow for very fine adjustments by 0.5dB increments.
◾️QUIET POWER-UP
Rocker switch on back panel coupled to timer relay, turns Criterion quietly on to full power after circuit test and stabilization.
◾️IEC
Grounded 15 Amp female IEC AC power connector.
◾️GREEN TECHNOLOGY
Highly efficient circuits yield modest power consumption of mere 50 Watts in class A, resulting in cool operations, and permits constant power-up to eliminate warm-up time and maximize musical performance. The Corus can operate also enclosed inside an entertainment unit.

01/07/2022

Jeff Rowland Model 312 Stereo Power Amplifier (Made In USA) ✅
Features 🎉
◾️XLR input connectors for balanced system configuration.
◾️RCA input connectors for unbalanced system configurations.
◾️Dual Speaker Output Terminals on each channel for bi-wiring applications.
◾️User selectable switching between balanced and unbalanced connections.
◾️Transformer coupled inputs provide universal compatibility with other components and eliminate ground loop noise and EMI.
◾️High efficiency ICEpower@ power conversion technology generates high output power with very little heat.
◾️Fully-balanced topology implemented in both input and output circuitry.
◾️Power Factor Correction (PFC) in power supply reduces AC line harmonic noise pollution and increases AC line power utilization to 99%.
◾️Proprietary switch-mode power supply technology ensures consistent performance under all operating conditions.
◾️12V remote ON/OFF remote power switching via 1/8” jack on rear panel.
◾️Standby power mode reduces warm-up time.
◾️CE approved speaker output terminals require no tools for secure, low resistance connections.
◾️Fail-safe operation provided by user-resetable thermal circuit breaker located on rear panel.
◾️Quiet, transient-free operation during power ON/OFF and input configuration switching.
◾️Selectable overall gain of 26 or 32 dB.
◾Ultra-low resonance, structurally rigid chassis, precision-machined from a solid block of aircraft grade 6061-T6 aliminum.
◾3-point self-leveling chassis support.

11/04/2022

Jeff Rowland Continuum S2 Integrated Amplifier (Made In USA)✅
RM28,200.00🎉🎉
Featuring enhanced sonic performance and flexibility, the new Rowland Continuum Series 2 integrated amplifier delivers stunning dynamic realism and expressive refinement through advanced topologies. Continuum S2 integrates the new Capri S2 preamplification circuit, input/output, and control features with an innovative 400 watt power amplification stage into a single chassis.
The amplifier delivers the trademark Rowland musicality, resolution, and unfailing authority to the most refined audio environments: challenge Continuum S2 to the extreme dynamics of high-resolution digital sources and the power requirements of large bi-wired speakers. Apply it to the complex loads of electrostatic panels in analog rigs. Admire its exceptional realism driving single-wired studio monitors in a sophisticated multi-media system.

24/03/2022

Jeff Rowland Daemon Integrated Amplifier (Made In USA)✅
(Pre-order)
Jeff Rowland Design Group launched the 1500 WPC Daemon Super Integrated Amplifier at Munich High End 2015. Named after the ancient Greek word for the power of “creative genius” and the spirit of “scientific inspiration”, the Daemon represents a technological leap forward as Jeff Rowland’s fifth generation of integrated amplifiers.
“Designing the integrated amplifier is one of the most challenging tasks in audio. To achieve perfect synergy of all components while entirely eliminating cross component interference is a black art.” says founder and president Jeff Rowland. “When done well, the results can be spectacular. The Daemon is one of our most sophisticated products to date. You’ll see much of its DNA expressed in future products. ”

16/03/2022

Jeff Rowland Model 825 Stereo Power Amplifier (Made In USA)✅
Experience the effortless magic of absolute authority. Vocalists and instruments materialize within an astonishingly concrete sound stage. From the most delicate solos to thundering orchestral, emotion and music dance throughout a seemingly infinite frequency spectrum.
Model 825 represents the ultimate benchmark of dynamic realism and expressive refinement. A quarter-century of engineering passion is expressed in the synergy of advanced technologies and timeless design. A stunning achievement inspired by the musicality of an enduring classic: the Rowland Model 8.

09/03/2022

Jeff Rowland Model 925 Mono Power Amplifier (Made In USA)✅
Experience the effortless magic of absolute authority. Vocalists and instruments materialize within an astonishingly concrete sound stage. From the most delicate solos to thundering orchestrals, emotion and music dance throughout a seemingly infinite frequency spectrum.
The Model 925 represents the ultimate benchmark of dynamic realism and expressive refinement. A quarter century of engineering passion expressed in the synergy of advanced technologies and timeless design. A stunning achievement inspired by the musicality of an enduring classic: the Rowland Model 9.

05/03/2022

Jeff Rowland Model 312 Stereo Power Amplifier (Made In USA)
RM34,950.00
~XLR input connectors for balanced system configuration.
~RCA input connectors for unbalanced system configurations.
~Dual Speaker Output Terminals on each channel for bi-wiring applications.
~User selectable switching between balanced and unbalanced connections.
~Transformer coupled inputs provide universal compatibility with other components and eliminate ground loop noise and EMI.
~High efficiency ICEpower@ power conversion technology generates high output power with very little heat.
~Fully-balanced topology implemented in both input and output circuitry.
~Power Factor Correction (PFC) in power supply reduces AC line harmonic noise pollution and increases AC line power utilization to 99%.
~Proprietary switch-mode power supply technology ensures consistent performance under all operating conditions.
~12V remote ON/OFF remote power switching via 1/8” jack on rear panel.
~Standby power mode reduces warm-up time.
~CE approved speaker output terminals require no tools for secure, low resistance connections.
~Fail-safe operation provided by user-resetable thermal circuit breaker located on rear panel.
~Quiet, transient-free operation during power ON/OFF and input configuration switching.
~Selectable overall gain of 26 or 32 dB.
~Ultra-low resonance, structurally rigid chassis, precision-machined from a solid block of aircraft grade 6061-T6 aliminum.
~3-point self-leveling chassis support.

12/02/2022

JEFF ROWLAND CAPRI S2-SC, MODEL 125 - A NEW LOOK, THE CHOICE BETWEEN LISTENING AND ART!
Balanced Line
The small chassis, on the other hand, reflects the design principle of using the shortest signal path in the machine. The left channel and the right channel are arranged separately, and the machine also adopts a fully balanced structure to minimize the line distortion and resonance problems. In addition to switching the signal source, the main function of the Line Stage pure analog preamp is to attenuate the signal and adjust the volume, which is different from the traditional design that uses a large number of variable resistors and relays to control the volume. Behind Capri S2-SC's volume k**b with strong feel resistance, there is a set of noise-free optical encoders to accurately control the volume, the volume is from 0dB to 100dB, and the sound pressure attenuation level can be adjusted by 0.5dB per step, which can be the most suitable for each music. optimal volume adjustment.
Sophisticated design and materials also include the use of four-layer advanced circuit boards in the machine, and transformer-coupled input circuits to achieve high component versatility and virtually eliminate ground loop noise, while ensuring unbalanced input gain and blocking ground noise. Common-mode noise with different inputs. Capri S2-SC's low-impedance output terminals (balanced 80Ω, unbalanced 40Ω) are also equipped with a bypass function that allows the preamp to connect to an AV amplifier or AV processor through A/V signals. This unit also provides an optional phono card for Line Input 1, providing three-level gain settings for MM and MC cartridges, an HP (High Performance) card for connecting to advanced MC cartridges, and provides More load options.

Jeff Rowland Malaysia

01/11/2023

15/06/2023

19/10/2022

14/10/2022

22/08/2022

01/07/2022

11/04/2022

24/03/2022

16/03/2022

09/03/2022

05/03/2022

12/02/2022

Address

Opening Hours

Telephone

Website

Alerts

Contact The Business

Shortcuts

Share

Category

Monday	10:00 - 21:00
Tuesday	10:00 - 21:00
Wednesday	10:00 - 21:00
Thursday	10:00 - 21:00
Friday	10:00 - 21:00
Saturday	10:00 - 21:00
Sunday	10:00 - 21:00