Laptop and Desktop Solution

13/10/2016

Disable USB ports on Windows PC via Registry

With this trick, you can disable access to your USB(Universal Serial Bus) ports on your Windows based PC to prevent people from taking out data without permission or spreading viruses through the use of USB (pen and flash) drives.

To use this trick to disable USB ports, follow the steps given below:-

Click on Start.
Click on Run. If you cannot find RUN, type it in the search box.
Type "regedit" without quotes. This will launch the Registry Editor.
Navigate to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\usbstor.
In the work area, double click on Start.
In the Value Data box, enter 4.
Click on OK.
Close Registry Editor and refresh your desktop.
To re-enable access to your USB ports, enter 3 in the Value Data box in Step 6.

Disable access to USB ports on your PC using Registry Editor

Try it yourself to make your PC invulnerable from data theft and malware which spread through USB ports. This works on Windows XP, Windows Vista, Windows 7 and Windows 8.

Note: This trick also disables access to your USB connected peripheral devices. So, do not use it if you have USB connected keyboard and mouse.

13/10/2016

STEPS TO FACTORY RESET IPHONE WITHOUT PASSWORD

Things you will need to perform this Method are:

iTunes Installed on your PC.
USB Cable
Once you are ready with above mentioned things, we are ready to proceed. This Factory reset without password Method works on all iphones 6/5s/5c/5/4s/4/3gs/iPad or iPod.

Step 1: First of all we will power off the phone. What we will do is keep holding Sleep/wake Button and Slide to Power off.

Step 2: Now you need to start iTunes on your Computer and make sure USB Cable is attached to it. Now Hold Home Button and then insert USB data Cable into your iphone.

Step 3: You will be presented with Connect to iTunes screen on your iphone. Now you can Release the Home Button. iTunes on your Computer should Detect the iphone in Recovery Mode. You could see something like below Picture on your PC.
how to factory reset iphone without password

Step 4: Basically what it says is to reset the Software to Factory standard. So Now go ahead and Click on Restore then Restore and Update. This will delete Everything from your phone so Caution there. Though to Factory Reset iphone without Password you can afford to loose data but will want to have access to your phone again right ?

Step 5: iTunes will extract the software and you can see the progress bar as well. Now just sit back and relax and wait for the software to do all the Process for you.

Step 6: Once extracting completes, You can see Apple logo on the screen it will then begin installing on your phone.

Step 7: Once the phone is restored you can start all over again like how the phone comes out of the box when its new.It is safe now to remove the USB Cable. You will be asked to Select Language, Country/Region, Wifi password and few other things.

You would be now able to Create new Passcode for your iphone without any trouble. So this is how you Factory Reset any iphone without password using iTunes. The method will delete everything from the phone but you will be now able to access it with entering the old password and creating the new one which you can remember easily this time.

Let us know what do you thing about the steps mentioned above and if they are of any help in the comment box below.

13/10/2016

HOW DO I CUSTOMIZE FOLDERS WITH DIFFERENT COLORS ?

Just follow the two simple steps given below to customize your folder :

STEP 1 :

First of all Download and install the software FolderColorizer. It is tested and 100% virus free. You can download it from here : DOWNLOAD FOLDERCOLORIZER

STEP 2 :

Now after installing the software, simply right click on any folder which you wish to customize. Here when you right click on folder, you will see a new option in the context menu i.e. Colorize !. Now simply go to that option and one submenu will appear. Now choose any color you want to assign to this folder.

Although it is a free software for everyone to use it but while you will use this software for the very first time , it will just ask your email id for activation of this software. But no need to worry because you wont need to confirm the activation by logging in to your e mail account. Even if you don’t wish to share your e mail id with developers of this software you can do it because product will be activated automatically once you enter any email id. So you can also enter any fake id if you want.

For your convenience I am providing you a screenshot of above mentioned procedure for changing folder color :

Customize folders with different Colors

In this way you will be able to easily organize folders in any of your drive weather C: , D: or any other drive. You can also assign different colors to several folders in the same drive to give it more attractive and cool looks.

Must Check: How to Change Facebook Default Theme

13/10/2016

STEPS TO CHECK ORIGINAL INSTALLATION DATE OF WINDOWS

Step 1: Hold Windows key and Press R key to open Run, Type CMD and hit enter to Open up Command Prompt.

Step 2: Type systeminfo.exe in Command Prompt and Hit Enter.

Step 3: Just wait a Few Seconds to Gather all the Data , Boom- You will Get all the info of your System in just a few seconds including the Original Installation Date which we are looking for.

Original Installation Date of Windows

Step 4: With this Command you Get all the Necessary info about your System but If you Just want to know the date on which your windows was Installed on your System then type this Command systeminfo | find /i “install date

Original Installation Date of Windows

You can see its showing that i have installed my windows last month as i had to Refresh my Windows, its pretty much Accurate.

Thats it guys, in this tutorial we saw how to check our system info including the Windows Installation Date.
If you have any trouble related to this article, have a go and Speak your mind in Comment box. I will be more than happy to hear from You.

13/10/2016

STEPS TO USE TWO DIFFERENT PROFILE PICTURES ON FACEBOOK

Step 1: First you have to Open your Timeline and Open your Profile Picture Album by clicking on Photos Tab, Choose a Picture that you want as another Profile Picture.

Step 2: Open that Picture in a New Window By Holding Ctrl and Clicking on it.

Step 3: Now Check the URL of that Picture, you will get something like below URL
https://www.facebook.com/photo.php?fbid=491366447588908&set=a.108695719189318.5863.100001466701828&type

All you have to do is Copy the fbid, Here in the above url, my photo fbid is 491366447588908.

Step 4: Open your Timeline, hover your mouse on your Profile Picture, you will see Edit Profile Picture Option,Click on it and Select Edit Thumbnail.

Step 5: A popup window will appear, now Right Click on your Profile Picture and Choose Inspect Element,

Use Two Pofile Pictures on Facebook

Scroll down till you find

28/09/2016

Locate and wipe your lost phone
Losing your phone is one of the worst things that can happen. These devices contain sensitive information and private data. If your phone falls into the wrong hands it could put you in a world of trouble. There are apps you can download to help in the event of a lost phone, but in order for them to work you need to have them installed before something bad happens. Luckily there is a built-in way to find your lost phone and even wipe all of your personal data.

Double-check to make sure Android Device Manager is installed
Go to google.com/android/devicemanager
Select your phone from the menu
Now you can see the location, ring it, lock it, or erase it
Check out our in-depth guide on how to find lost or stolen phones.

Android Device Manager makes it easy to locate, ring, or wipe your device from the web.

27/09/2016

GET BACK DELETED WHATSAPP MESSAGES-MANUALLY

Only Few Knows that Whatsapp Creates backup of all the data each day at 4 am (system time) Which is Stored in the SD card of your Android Smartphone. Follow the below simple steps and i will show you to Get back Deleted Whatsapp Messages.

Step 1) First of all Navigate to the Whatsapp database folder, you will require file explorer for this task. the path is > sdcard/WhatsApp/Databases.

Step 2) In the Database folder you will see Chat files which are with names similar like msgstore-2014-01-04.1.db.crypt. You may notices the file names have dates as well. but there is a File which is msgstore.db.crypt, we need to rename it. you can add any word before msgstore.db.crypt.
Step 3) After renaming that file, From the other Files just select the file which shows appropriate date before you accidently deleted your whatsapp messages, and then rename that file to msgstore.db.crypt. This Renaming process can also be done on your PC by Connecting your device.

Step 4) Now the Final step, Goto Setting>Applications>manage applications>Whatsapp and Click on Clear Data. Now open Whatsapp, Choose Restore when it prompts. Thats it, the chat file saved as msgstore.db.crypt will be restored and hence your messages too.

Get back deleted whatsapp messagesOn Reaching here, you Need to Click on Restore instead of No Thanks.

Bonus: In Case if you have deleted any Image or Audio or Video from your whatsapp chat, then do not worry, its not deleted forever untill you delete it. To view that image or Video all you have to do is with the help of your Preferred file Manager, Navigate to sdcard/WhatsApp/Media Where you will find folders with names Whatsapp Audio, Whatsapp images, Whatsapp video, Open them up to find the file you are looking for.

GET BACK DELETED WHATSAPP MESSAGES- USING WEB APP

In this Method we are Going to use a Web Application Called Recover Messages which is Specially Designed to Get back Deleted Whatsapp Messages. This is a Free Online Services which will help you to Read the Content of the database file and shows you Sent and Recieved messages.

Simply Go to Recover messages Site, Click on Select SQlite file to Upload the Database file, Select the Database file from SD card , Check the box which says i accept the terms of use and click on Scan.

Get back deleted whatsapp messages

Just wait for few seconds while it takes a bit of time to show you the Messages. With this Simple Method you can View your deleted Whatsapp messags within less than a minute.

The only drawback is You can only extract and View/Read your deleted messages but you can not restore them to your whatsapp chat history.

So in this article we saw two methods to Get back Deleted Whatsapp Messages, i hope it helps you now or in future. Don’t forget to share it on Social media if you liked it and You may subscibe for the free Daily Updates directly to your e-mail inbox, Using Below Subscription box.

27/09/2016

1)Becoming an Official Spy

One of the most popular Whatsapp tricks that are currently being used is the opportunity to become a spy. You can use this particular Whatsapp trick to spy on the activities of someone else’s account within this specific program. In order to take full advantage of these capabilities, you simply just need to adjust the settings within the rooted device. After those settings have been opened and fully accessed, taking note of the actual MAC address of that phone’s internal Wi-Fi connection is the only thing that will need to be noted.

2)You Do Not Need a Number

There is also another Whatsapp tricks that can allow you to use this program without ever having to use a person’s specific number. This is accomplished simply by manipulating the actual verification request.

Many people have heard about this in the past, but have had no idea where to start in order to take full advantage of this capability. The verification request will appear almost immediately after the program has been installed, so users just have to pay close attention and look out for it.

3)Retrieving Deleted Messages

Another great Whatsapp trick is that users are able to actually retrieve messages that have already been deleted. In order to have direct access to these messages, all that needs to be done is a particular file (the msgstore.db.crypt file) will need to be transferred to a different mobile device and then restored within the new device’s Whatsapp program.

Check this Awesome trick in detail here > GET BACK DELETED WHATSAPP MESSAGES
4)Sending Pictures to Other Pictures

Whatsapp is also capable of performing some pretty amazing functions simply by collaborating with other programs and applications as well. For example, there is an application known as Magiapp that can work directly with Whatsapp in order to complete a fairly impressive picture transfer. You can send one picture to another picture just by using this application, which is usually something that is done more for personal purposes instead of professional.

27/09/2016

FEW TRICKS TO SPEEDUP PENDRIVE DATA TRANSFER RATE:

1.File system should be NTFS: If you want to Speedup Pendrive , then make sure you have NTFS as file system. You can do so by Right clicking on your pendrive and selecting Format,Select NTFS File system, Uncheck Quick Format And Click On Start.

2.Disk errors: To check disk errors go to the properties tab of your pen drive, then select ‘tools’ tab. You will find a ‘check now’ button, click it and then hit ‘start’ to fix the errors. The time taken for scan depends on the size of the pen drive.

Speedup Pendrive

3.Device policy: Under properties of your pen drive, select ‘hardware’ tab. Then select USB device from there that will lead you to a pop up window where you need to change settings. You can even have better performance of pen drive by clicking the option under ‘hardware’ tab.

4.Format: This is one of the effective options that many users have tried. When you have used your pen drive for quite a long time, you can speed it up by formatting the device.

Carefully test your pen drive with the factors given above to Speedup Pendrive. In addition to this, you should keep checking for these aspects regularly, say twice or thrice in a month.

27/09/2016

STEPS TO FORMAT PENDRIVE USING CMD

This guide formats your flash drive as FAT32, to format as NTFS simply substitute the term in the command box. FAT32 is the recommended formatting style by this guide but many do prefer NTFS. Follow the Below steps to Format an unformatable Pendrive.

Step 1. Turn on computer as normal

Step 2. Once you are in your desktop insert Pendrive into USB port
Please note: if you know the letters associated with your disk locations or can use a utility such as disk part to list this information then skip steps 3 and 4

Step 3. Go into my computer (accessible from the start menu or desktop) and look down the navigation panel on the left hand side, this lists down to the popular and root menu folders and locations on your computer.

Step 4. Your Pendrive should be listed in one of these locations, it may be referred to by brand, as portable storage or something similar. Next to this label will be a letter,

for example “G: removable storage device ” if the device does not show up you may need to test the port to find the letter with another USB device. This letter needs to be written down or remembered in order to complete this process.

Step 5. Go to the windows start menu, click start or the Windows symbol depending on your edition of Windows, then click run.

Step 6. Type cmd into the run dialog box and click OK, this is to start the command prompt window from which you will be able to choose your format style and name your drive.

Step 7. Then the command prompt window is opened and you will need to type ” Format G: ”

Format pendrive using cmd

if you want to Format it as FAT32 then type ” Format G: /FS: FAT32 ”

Step 8. The G in this instance refers to our example Pendrive location, instead you would enter the letter that you remembered or wrote down from the my computer side panel
After you have typed the above command press enter.

Step 9. Here, you will be asked to press enter again and then to give a name for your drive. Follow these prompts then click on enter again.

You have completed the process of Formating pendrive using cmd; go back into my computer to check that the formatting has been completed successfully.

27/09/2016

STEPS TO CREATE RUN COMMANDS OF YOUR OWN

Step 1. The first step is to select the software or application for which you want to make custom Run command. For example, let us consider Google Chrome as the example here. Remember, you can choose any application other than which is already there in the Run command.

Step 2. In the second step, right click on the desktop of your computer system and make a new shortcut.

Right click > New > Shortcut

Step 3. As you select the Shortcut option in the 2nd Step, it will open up a dialog box. And, the dialog box will ask you path of the application or software for which you want to create the Run command.

Step 4. Now, you need to browse through the files and choose the one that shows “chrome.exe”. Well, it is quite obvious that all the executable files can be found in the C drive (or wherever the Operating System has been installed), inside the folder “Program Files”. For example, “C:\Program Files\Google Chrome\chrome.exe”

Step 5. Once you are done with Step number 4, just click on “Next” button and simply provide a relative name to that shortcut. Remember, the same name will be used later in the Run command.

For example, “GC” for Google Chrome

Step 6. Now, click on the “Finish” button. Once it is done, an icon related to that application or software will show up on your computer’s screen. It means that the process of creating shortcut has been done successfully.

Step 7. In this step, just cut and paste that recently made shortcut icon into your computer’s root drive, in its Windows folder.

For example, C:\ Windows , Make sure you are the administrator of the computer or have its password.

Step 8. Now, you are done with the set up and can run the application through Run Command. Just go to Run and enter the keyword “GC”, and Google Chrome will begin executing.

So this was a Short but Usefull Tutorial to Create Run Commands for any software in windows,I Hope this Post will Easeup your Work, Stay Tuned and Subscribe to this Blog to Recieve Updates Everytime a New article is posted. Subscribe Box.

27/09/2016

HOW TO CREATE WINDOWS 8 BOOTABLE USB

I here Assume that you already have ISO image of Windows 8 or 7 of which you want to Create Bootable Pendrive.

Step 1 :Download Windows 7 USB/DVD download tool and install it.

This tool is available for free from Microsoft Corporation as well so you can get it from there too. Despite its name, this tool works with Windows 8 ISOs as well. You can use this tool for any version of Windows.
Step 2:After downloading and installing the tool, Run it , now you need to Browse and give the path where the ISO file is located in your computer.

Step 3:Now select whether you want to create a bootable DVD for windows or you want it to be a bootable pendrive. Here you need to select USB device because you want to make bootable pendrive.

Step 4: Browse and select the pendrive which you want to make bootable. Make sure that the pendrive has atleast 4 gb free . Now click on Begin Copying.

Step 5:Once you begin copying , the tool will start creating bootable Windows 8 USB installer flash drive using the Windows 8 ISO. Let this process complete , lastly when you see the message “Bootable USB Device created successfully”, you can restart your PC and boot from the USB drive.

So this was my Quick tutorial on how to Create Windows 8 Bootable USB, Hope this will help you.