VK Electronics parakkadav

28/06/2018

21/09/2017

*Manumohan*
475)
LCD/LED and Plasma TV Manufacturer Reset
Codes:
*****************
AKAI:
AKAI Service Menu
Method 1
Press the MENU key.
Then press the 1, 9, 7, & 9 keys.
The Service Menu will now be displayed on screen.
To exit service mode, power off the TV.
=====================================
AKAI Service Menu
Method 2
Turn TV power on.
Press the MENU, 8, 2, 0, & 2, keys on the remote control.
The Service Menu will now be displayed on screen.
To exit service mode, power off the TV.
==================================
FUNAI:
FUNAI Service Menu:
Funai LCD Service Access Code
Method 1
Turn the TV power on using the POWER key on the TV.
Press the STANDBY-ON, 2, 7, 1, & MUTE keys on the remote control.
The Service Menu will be displayed on screen.
To exit service mode, press the STANDBY-ON key on the remote.
Funai LCD Service Access Code
Method 2
Turn the TV power off.
Press and hold MENU key on the TV.
Then press the STANDBY-ON key on the TV.
The TV will turn on with the Service Menu displayed on screen.
To exit service mode, press the STANDBY-ON key on the TV.
Funai LCD Service Access Code
Method 3
Turn the TV power off.
Press and hold SETUP key on the TV.
Then press the STANDBY-ON key on the TV.
The TV will turn on with the Service Menu displayed on screen.
To exit service mode, press the STANDBY-ON key on the TV.
Funai LCD Service Access Code
Method 4
Press the CH down & VOL down keys at same time.
Then press the MENU key.
The Service Menu displayed on screen.
To exit service mode, turn the TV power off.
Funai LCD Service Access Code
Method 5
Press the CH up, CH down & VOL up keys at same time.
Then press the MENU key.
The Service Menu displayed on screen.
To exit service mode, turn the TV power off.
============================================================
HAIER:
HAIER Service Menu:
Haier **************************************
Bring the menu up, move the hi lite-bar to “audio” then enter 8893 on remote keys
(Another method for Haier)
Press the 'Menu' key
Then enter 8893
Press "OK". The TV is now in factory mode
To "Exit" from service mode, press the 'Exit' key on the remote control
==============================================================
HP:
HP Service Menu:
While the LCD TV is on, unplug the AC power cable.
Then while pressing the INPUT & VOL down keys on the remote,
plug the AC power cable back into the wall outlet.
When it powers up you will see a small letter "k" appear in brackets on the screen.
Then on the TV, press and hold down the VOL down & CH down keys and release.
CH up & CH down keys navigate through screen menu.
VOL up & VOL down keys adjust various field values.
Turn the TV off to exit the Service mode.
==============================================================
HISENSE:
HISENSE Service Menu:
In customer menu go to”Parental” enter 0000 then select”Clean All”
then power the TV off and back on and first time setup menu will be on screen.
For other models, same as the above model but in menu it is labeled “Lock”
(Another Method for Hisense)
Power on the TV.
Press 'Menu" key to bring up User OSD menu.
Select 'Sound => Balance.
When the 'Balance' is "0", Enter {0 => 5 => 3 => 2} in sequence.
Factory OSD will appear.
Press the 'Standby' key then AC Turn OFF, and restart the TV, to "EXIT" Service Mode.
==============================================================
HITACHI:
HITACHI Service Menu:
There are many Hitachi reset codes try either one until the right code works.
Hitachi TV Service Method 1
Turn the TV power on.
Press the MENU, MENU, 8, SELECT, keys on the remote.
The Service Menu will be displayed on screen.
Use the UP DOWN keys to select items.
Use the LEFT RIGHT keys to change the data.
Press the EXIT key to exit the Service mode.
Hitachi TV Service Method 2
Turn the TV power off.
Press and hold the INPUT key on the TV then press the POWER key.
Hold both keys until the TV turns on with the Service Menu displayed on screen.
Use the UP DOWN keys to select specific field options.
Use the LEFT RIGHT keys to change data values.
Press the EXIT key to exit the Service mode.
Hitachi TV Service Metho

21/09/2017

Manumohan:
Service mode
8893cpng6ng5=menu--6483
8873 =menu---2483

Tosiba
8893 = menu--6483

Philips
062596--menu

LA76931S-7N58Y4
VOL -0 than menu--6964

8823CPNG. All
Volume level (0)
VOL-- panel and recoll remote

Sony
Display_channel 5 vol + power on

Samsung
Standby_ display_menu_mute_power

Hitachi
Menu__4725

TDA9370
Pic_2003 original remote
Child lock 1227

LC863528C
sleep __ remote
Menu__front panel

Sansui
Menu___1947
Menu___6483

Videocon new
Menu___0323
Menu___1147

Haier
Manu___8893

TDA11105/TDA121---
Vol__0 PanelService mode
Dazzle
8893cpng6ng5=menu--6483
8873 =menu---2483

Tosiba
8893 = menu--6483

Philips
062596--menu

LA76931S-7N58Y4
VOL -0 than menu--6964

8823CPNG. All
Volume level (0)
VOL-- panel and recoll remote

Sony
Display_channel 5 vol + power on

Samsung
Standby_ display_menu_mute_power

Hitachi
Menu__4725

TDA9370
Pic_2003 original remote
Child lock 1227

LC863528C
sleep __ remote
Menu__front panel

Sansui
Menu___1947
Menu___6483

Videocon new
Menu___0323
Menu___1147

Haier
Manu___8893

TDA11105/TDA121---
Vol__0 Panel
Hold mute remot
Service mode
Dazzle
8893cpng6ng5=menu--6483
8873 =menu---2483

Tosiba
8893 = menu--6483

Philips
062596--menu

LA76931S-7N58Y4
VOL -0 than menu--6964

8823CPNG. All
Volume level (0)
VOL-- panel and recoll remote

Sony
Display_channel 5 vol + power on

Samsung
Standby_ display_menu_mute_power

Hitachi
Menu__4725

TDA9370
Pic_2003 original remote
Child lock 1227

LC863528C
sleep __ remote
Menu__front panel

Sansui
Menu___1947
Menu___6483

Videocon new
Menu___0323
Menu___1147

Haier
Manu___8893

TDA11105/TDA121---
Vol__0 Paneli
Hold mute remot


Service mode
Dazzle
8893cpng6ng5=menu--6483
8873 =menu---2483

Tosiba
8893 = menu--6483

Philips
062596--menu

LA76931S-7N58Y4
VOL -0 than menu--6964

8823CPNG. All
Volume level (0)
VOL-- panel and recoll remote

Sony
Display_channel 5 vol + power on

Samsung
Standby_ display_menu_mute_power

Hitachi
Menu__4725

TDA9370
Pic_2003 original remote
Child lock 1227

LC863528C
sleep __ remote
Menu__front panel

Sansui
Menu___1947
Menu___6483

Videocon new
Menu___0323
Menu___1147

Haier
Manu___8893

TDA11105/TDA121---8
Vol__0 Panel
Hold mute remote

18/08/2017

Kailas Bodade:
Micromax LCD/LED Factory Mode

The TV has 3 types of Service Modes

1) Design Menu - Can access all other modes through this - Access to Overscan and other settings
Using the remote, enter the “Picture” submenu in the OSD; choosing the “contrast” item and press the 1, 9, 5 and 0 in series, Design Menu will appear in the left top of screen

2) Factory Menu - Access to color calibration & WB settings
Using the remote, enter the “Picture” submenu in the OSD; choosing the “contrast” item and press the 9, 7, 3 and 5 in series, Factory Menu will appear in the left top of screen

3) Service Menu - Random stuff
Using the remote, enter the “Picture” submenu in the OSD; choosing the “contrast” item and press the 9, 7, 0 and 5 in series, Service Menu will appear in the left top of screen
COBY
Enter menu, Hi-Lite “audio” then enter 8893 Mode/Source 2580

Dynex
Source/Input 2580
Hold Vol down on TV and hold the ( #1) button on remote

Element
Menu 0000 > menu 1147

Haier
Pull up menu, Hi-Lite “audio” then enter 8893.

Hisense
“Parental ” enter 0000 then select
“Clean All ”

Insignia
Input 2580 (TV is on)

LG / Zenith
Hold MENU on TV and MENU on remote for 5 to 10 seconds,

Mitsubishi
Menu 123 or Menu 2470 (TV is on)

NEC
While powering ON, hold "MENU" or "INPUT" on TV,

Panasonic
Hold [ VOL-- ] on TV, press and hold menu button on remote.

Philips
Push Menu , select 062596

Polaroid
Hold [VOL--] and [CHANNEL--] or hold [VOL+] and [CHANNEL+]
(TV is on)

Proscan
In customer menu go to setup, select parental control menu,
enter 0000 then select “clear channel list”.

RCA
Menu 1147

Sanyo
Hold VOL Down on TV, press and hold #1 button on remote,
VOL will jump to halfway and set shuts off.
Turn back on have 1st time setup screen.

Samsung
Mute 182 power

Samsung (European)
Power off, Info - Menu - Mute - Power,

Seiki
Menu 0000

Sharp
Menu, 1999
Menu, 3481
Menu, 1147
While holding [ VOL– & INPUT ] buttons on TV plug in set when
“K ” appears push (VOL– & CHANNEL-)

Sony
Hold “arrow up” on Remote and push power button on TV (TV
is ON)

Symphony
Source/input 2580

Toshiba
On Menu, select “Installation”, then “ System Information” press
the right arrow button.
(“System Information” will change to “Factory Reset” or
something similar)

Vestel
Menu 4725 then select "RESET"

Vision Quest
Source / Input 2580

Vizio
menu under “Help” tab is Factory Default enter
0000

Haier LCD
1. Press “MENU/EXIT”;
2. Press”1”+”9” +”9” +”9”;
3. Press “OK”

Panasonic
While pressing [VOLUME ( - )] button of the main unit,
press [INFO] button of the remote control three times
within 2 seconmo

AOC
TV mode adjust volume to zero, press mute key
and press number key 9 8 7 6 .

Beko - LCD TV Service Menu Menu- 9, 3, 0, 1
(1)China lcd
menu Press SLEEP→PIC→DSP→MENU button on the remote

(2)Press MENU => Q.VIEW => MUTE to enter
(3) "PRESET"."Ch ,press 2483

Haier LCD HL40XP1 TV Service
Press Menu button, press the key 8893, and Press “OK”
Haier HTR20 20" CRT TV
Press MENU buton on TV pannel andMENU buton on remote control at the same time

Philips Service Mode
remote control an key sequence 0 6 2 5 9 6
by pressing the 'MENU' button.

Master Service,
[email protected]

samsung LCD remote control, press
INFO, MENU, MUTE, POWER ON

Sanyo LCD- Service mode
menu => press “INPUT”, “2”, “5”, ”8” and “0”

Sharp Service Mode Press and hold buttons VOL- and
PR+ on the local keyboard

Singer Service Menu
press the sequence on the remote control: 1, MUTE,
RECALL, MUTE. 1, MUTE, DISPLAY MUTE

Thomson Service Menu
Standby. Switch off with the mains switch. Press and hold
'Program down ' and 'Volume down' and then switch on

SONY Service mode
sequence DISPLAY, 5, VOL +,
POWER.

DISPLAY (info), 5, volume +, TV (Power)

Onida
Press display and VSM

18/08/2017

07/07/2017

Good morning

22/06/2017

Darla Gi:
How to cut the line CKV, CKVB LCD Panel technology which adopts the findings Samsung, which features the panel are:Such panels are not only used in Samsung LCD, but are also used in the Toshiba, and Sony
(Darla)
PolytronDo not use the circuit panel "row-driver" who are on the outside of the left-right of the screen (... called ear), for row-driver circuits here ter-intregrasi entered in the glass panel.On board the T-con in found test-point by writing TVP, CKVB1, CKVB2, CKV1, CKV2, VSS.The problem is often the case with such panels are:Sometimes the color-changing images, such as magenta or reddish.Or when it is so severe double image vertically.Or image such as a vertical rolling quickly.Symptoms of damage caused by the aforementioned damage to the row-driver circuits that exist within the glass panel. Such damage often is panel can still be saved by way of "cutting" (people sometimes call "cut" or "circumcision")one of the columns left or right laneTherefore, we must first understand how the actual line 2 is and which part should be disconnected.There are two lane path she goes to the glass panel, ie toward the "left" and towards the "right" screen. The lines come from one source, and then each branched into two to the left and right . The cut line will be "just one" lane path towards the glass panel, so do not let one piece, resulting in lost toll lanes to 2 lanes altogether.Which line must be terminated? Column left or right? In this can not be known. We must try to play first or chancy.For example, we cut the first column on the right track, ...... turns even darker raster. It shows usone piece column.Reconnecting line 2 that had been cut into pieces ...... and replace the left lane.Reconnect the broken lines must be done carefully and thoroughly. This means making sure that line 2 was reconnected and nothing short of each other.To execute, you should use adequate lighting and a magnifying glass.Line 2 should be drawn or photographed before ex*****on ... so in order to trace the original path is unknown if one cut line.Use a knife to cut off the little cuter they arenew or razor.Fig.1Fig.2Steps before making the cut line.Find the first position left or right lane lines to be cut, that Line 2 TVP, VSS, CKV1, CKV1, CKVB1, CKVB2 and then each given a sign.Use the ohm meter to find the path, because the marked test point generally only one path only. The probe tip canbe provided with a pin connection pieces for easy measurement due to line 2 to be measured is soft.Ifline 2 is found, the line was cut before first scraped up her bronze look. This is useful if later it turns out one piece, so that strips easily extended by the given solder strip. Cut strips:Cut the strips should be in this part of the route entering the nearby glass panel.Directionof the blade should not be perpendicular to the line of cut, but made a slight angle. This bergunaka facilitate that if will be resumed again as one piece.Remember - always use a new knife, cut strips to a minimum. This can be useful if you need to connect to ease again.Cut strips CKV1,2 and CKVB1,2 first.Fig.3Observe carefully the image results were obtained:May result images obtained "cling" as its original resolution.Perhaps the images to the left and right different resolution. The next, it seems that quite rude.the overall results may be rough resolution images, as there are horizontal lines.There may be one or two thin horizontal colored lines.The problemmay be fixed can not be repaired, even after trying to cut the left and right parts of the crop. means thepanel can no diselamtkanFrom the examples above picture result, perhaps irreversible results by:Cut off all lines including TVP and VssOr even connect one line or several lines that have been cut in the same column.

22/06/2017

Pravin Mevada:
Components code and abbreviation on Laptop motherboard

COMPONENTS CODE

CODE COMPONENT
C :CAPACITOR
D IODE
F :FUSE
L :INDUCTOR
PC :POWER CAPACITOR
PD :POWER DIODES/DIODE
PL :POWER INDUCTOR
PQ :POWER TRANSISTOR
PR :POWER RESISTOR
PU :POWER INTEGRATED CIRCUIT
Q :TRANSISTOR
R :RESISTOR
T : Transformers
U :INTEGRATED CIRCUIT/BGA CHIP/EMBEDDED CONTROLER/BIOS IC,ETC
X : Terminal strips, terminations, joins .oscilator
Y : Crystal

ABBREVIATION ON LAPTOP MOTHERBOARD FOR SCHEMATIC

AC : Alternating current
ACDRV : AC adapter to system-switch driver output
ACEDET : Adaptor Current Detector
ACGOOD : Valid adapter active-low detect logic open-drain output
ACIN : Adaptor Current sensor Input
ACN : Adapter current sense resistor
ACOP : Input Over-Power Protection
ACOV : Input Overvoltage Protection
ACP : Adapter current sense resistor, positive input.
ADP+ : Adapter Positif Suplay
ADP_ID : Adapter Identity
AGND :Analog Ground
ALWP :ALWAYS ON POWER
B+ : AC OR BAT POWER RAIL FOR POWER CIRCUIT
BATT : Battery

BAT+ :BAT POWER RAIL FOR POWER CIRCUIT
BAT_DRV :Bat Fet Gate Driver
BAT_V Battery Voltage
BOM :BILL OF MATERIAL MANAGEMENT
BT :BUTTON
BT_EN :Bloototh Enable
BUZER :Connected
BYP :Baypass
CHGEN : Charge enable active-low logic input
CIN : Input Capacitor
CLK_EN :CLKOCK ENABLE
CN :CONECTOR
CRT :Cathode ray tube
CSIN :Current Sensor input Negatif
CSIP :Current Sensor input Positif
DC irect current
DM IM/DIM SOCKET/SOKET MEMORY/SOKET DDR
DOCK OCKING SOCKET
EC :Embedded Controler
EC_ON :Embeded Controler Enable
EMI :Elektromagnetik Interference(GANGGUAN ELEKTROMAGNETIK)
EN :ENABLE
ENTRIP :Enable Terminal
F :FUSE
FSEL : Frequency Select Input.
GATE : Trigger gate
GND :Ground
GP :GROUND PIN
GPI :General Power Input
GPIO :General Power Input Output
HDMI :High-Definition Multimedia Interface
ID :Continuous Drain Current
IDM :Pulsed Drain Current
IIN : Operating Supply Current
IIN(SHDN): Shutdown Supply Current
IIN(STBY): Standby Supply Current
IS :Continuous Source Current (Diode Conduction)
IVIN :Battery Supply Current at VIN pin
JP :JUMPER POINT
KBC :Keyboard Controler
LCDV :LCD POWER
LDO :Linear Driver Output
LGATE : Lower-side MOSFET gate signal
LPC :Low Pin Count
LVDS :Low-voltage differential signaling(SYSTEM PENSIGNALAN)
MBAT :MAIN BATTERY
NB :North Bridge
ODD :OUTPUT DISC DRIVE
PCI :Peripheral Component Interconnect
PGOOD : Power good open-drain output
PIR :PRODUCT IMPROVED RECORD
PSI # :Current indicator input
PVCC : IC power positive supply
RSMRST : Resume Reset
RTC :REAL TIME CLOCK
SB : South bridge
SHDN :Shutdown
SYS_SDN :System Shutdown
SPI :Serial Peripheral Interface
TD eath Time
THRM :THERMAL SENSOR
TMDS :Transition Minimized Differential Signaling(TRANSMISI DATA TEKNOLOGY)
TP :TES POINT
TPAD :THERMAL PAD
UVLO : Input Undervoltage Lock Out
V :RAIL(POWER)
V+ :Positive Voltage
VADJ : Output regulation voltage
VALW :ALWAYS ON POWER
VALWP :VALW PAD
VBAT :BATTERY POWER
VCCP :power chip(ich,graphic chips)
VCORE :POWER PROCESOR
VDD : Control power supply
VDDR :POWER DDR (VDRAM/VRAM/VMEM)
VDS :VOLTAGE DRAIN SOURCE
VFB : feedback inputs Power
VGS :VOLTAGE GATE SOURCES
VIN : Input Voltage Range
VIN :ADAPTER POWER SUPLAY(vol_in)
VL :Power Lock
VL :voltage across the load/Tegangan beban resistor
VL :Voltage Linear
VLDOIN :Power supply of the VTT and VTTREF output stage (to powerMOS).
VOT :Volt_out
VRAM :Power Memori
VREF :POWER REFERENCES/SCHEMA REFERENCE/PERMINTAAN SKEMA
VS :SUITCH POWER
VS+ :SUPPORT VOLTAGE POSITIF
VSB :POWER SWITCH BUTTON
VSS : Signal ground.
VSW :POWER SWICT
VTT : Memory Termination Voltage
VTERM :Memory Termination Voltage
VUSB :POWER USB
VGA :POWER VGA (VGPX/VGPU/VCVOD)
VGFX :POWER GRAPHIC CHIP
VREF :VOLTAGE REFERENCES

22/06/2017

Manu mohan:
💐💐💐💐SOmE USEFULL SITES FOR OUR TECHINICIANS👍🏻👍🏻👍🏻👍🏻👍🏻
www.lqv77.com for SCHEMATICS diagram & bios bin file & forum
http://www.ja.axxs.net/ ibm bios password nvram location
http://hobi-elektronika.net/biosfirmware/bios-laptop laptop bios file
http://notebook1.ru/forma1/viewforum.php?f=50 laptop bios Russian site
http://laptopsvc.vn/vi/bios/2013/07/81E21021/bios-acer/ schematics and bios
http://onns.ru/category/Asus/ laptop schematics
http://www.heimafix.com LAPTOP SCHEMATICS & BIOS Chinese site
http://www.biosflash.com/index.htm bios bin file for desktop motherboard
http://www.hardwaresecrets.com/datasheets/548 sio datasheet
http://biospassword.eu/free bios password recovery
http://www.notebookrepairguide.com/, a directory of sites with laptop tech support,
http://www.ifixit.com/Guide/, probably the best resource on the internet for disassembling Apple devices, including iBooks/MacBooks, iPods, and some desktop models (iMac/Mini);
http://repair4laptop.org/, a site dedicated to owner-made repair guides and mods;

22/06/2017

Manumohan vkelectronics:
Philips LED / LCD /
Model Name
Service Mode
24PFL4555
Menu+Sound+8532
14PT3525
Menu-Picture-contrast-9735
14PT4525
Menu-Picture-contrast-9735
21PT3525
Menu-Picture-contrast-9735
21PT4525
Menu-Picture-contrast-9735
21PT5525
MENU-1147
24PFL4505
Menu+Cont+1950
24PFL5505
Menu+Cont+1950
24PFL5555
Menu+Cont+1950
32PFL3305
Menu+Cont+1950
32PFL4305
Menu+Cont+1950
32PFL4355
Menu+Sound+8532
32PFL5355
Menu+Cont+1950
32PFL5505
Menu+Cont+1950
42PFL3505
Menu+Cont+1950
42PFL4755
Menu+Sound+8532
42PFL5505
Menu+Cont+1950
42PFL5555
Menu+Cont+1950
46PFL5505
Menu+Cont+1950
46PFL5755
Menu+Cont+1950
46PFL6755
Menu+2008
55PFL5755
Menu+Cont+1950
55PFL6755
Menu+2008
21PT3426
MENU + 1947
32PFL5356
MENU + 1999 + BACK SPACE
32PFL5556
MENU + 1999 + BACK SPACE
42PFL5556
MENU + 1999 + BACK SPACE
46PFL5556
MENU + 1999 + BACK SPACE
42PFL6556
MENU + 1999 + BACK SPACE
46PFL6556
MENU + 1999 + BACK SPACE
32PFL4356
MENU + 2580 + OK
32PFL4556
MENU + 2580 + OK
22PFL4506
Menu+2580
26PFL4306
Menu+2580
42PFL5506
Menu+1999+back
24PFL5306
Menu+1950
32PFL5306
Menu+1950
32PFL6306
Menu+1950
32PFL6506
Menu+1950
22PFL4556
MENU + 2580 + OK
21PT4326
MENU + 1147
14PT3626
MENU + PICTURE MENU + 6483
21PT3326
MENU + PICTURE MENU + 6483
14PT4626
MENU + PICTURE MENU + 6483
21PT4226
MENU + PICTURE MENU + 6483
21PT3626
MENU + PICTURE MENU + 6483
21PT4626
MENU + PICTURE MENU + 6483
14PT3426
MENU + 1947
24PFL6306
Menu+1950
32PFL5007
Menu+1950
24PFL5007
Menu+1950
32PFL3057
Menu + 1950
42PFL3457
Menu + 1950
22PFL4407
Menu+2580
24PFL5237
Menu+1950
24PFL5637
Menu+1950
32PFL5237
Menu+1950
32PFL6577
Standby-UP-Down_down
42PFL6577
Standby-UP-Down_down
32PFL5637
Menu + 1950
14PT2407
MENU+1147
21PT4327
MENU+1147
42PFL7357
Menu + 1950
24PFL3457
Menu + 1950
22PFL5237
Menu + 1950
21PT3427
MENU+1147
21PT3527
MENU+1147
22PFL5557
Menu+2580
24PFL5557
Menu+2580
21PT5527
MENU+1147
32PFL4737
MENU+2580
14PT2307
MENU+1147
32PFL6357
MENU+1950
32PFL5957
Menu+2580
24PFL5957
Menu+2580
32PFL5537
Menu+2580
32PFL5937
Menu+2580
42PFL6357
MENU+1950
42PFL7977
Standby-UP-Down_down
32PFL7977
Standby-UP-Down_down
21PT4627
MENU+1147
40PFL4757
Menu+2580
32PFL4537
MENU+2580
46PFL8577
Standby-UP-Down_down
58PFL9577
Standby-UP-Down_down
42PFL6977
Standby-UP-Down_down
24PFL3538
MENU-2580
32PFL6977
Standby-UP-Down_down
29PFL5937
Menu+2580
21PT3428
MENU+1147
21PT4628
MENU+1147
14PT2508
MENU+1147
22PFL5237
Menu + 1950
21PT4428
MENU+1147
21PT3326
MENU + PICTURE MENU + 6483
14PT4428
MENU+1147
21PT3527
MENU+1147
22PFL2658
Menu+1950
24PFL3938
Menu+1950
22PFL2658
Menu + 1950
20PFL3938
Menu+1950
22PFL3958
Menu+1950
32PFL3938
Menu+1950
24PFL5237
Menu + 1950
24PFL4738
Menu+1950
22PFL4758
Menu+1950
32PFL4938
Menu+1950
29PFL4938
Menu+1950
29PFL4738
MENU-2580
32PFL4738
Menu+1950
40PFL4758
Menu+1950
50PFL4758
MENU-2580
46PFL4758
Menu+1950
32PFL5578
Standby-UP-Down_down
32PFL3738
Menu+1950
22PFL3758
Menu+1950
40PFL4958
Menu+1950
46PFL8777
Standby-UP-Down_down
20PFL3738
Menu+1950
32HFL4738
Menu+1950
29PFL4738
MENU-2580
24PFL3159
Menu+1950
20PFL2139
Menu+1950
32PFL3439
Menu+1950
39PFL4579
Standby-UP-Down_down
21PT3428
MENU+1147
40PFL5059
MENU-2580
22PFL3459
Menu+1950
32PFL5039
MENU-2580
21PT4428
MENU+1147
21PT5527
MENU+1147
39PFL3559
Menu+1950
32PFL4479
MENU-1950
24PFL2159
Menu+1950
24PFL3738
Menu+1950
50PFL5059
MENU-2580
20PFL3439
Menu+1950
…