prolific_tech_shopkart

Name: prolific_tech_shopkart
Address: Delhi, IN
Telephone: +919311541528

Home
India
Delhi
prolific_tech_shopkart

Shipping all over India �
We deliver best quality of Embedded Electronics & STEAM products to your doorstep | ATL Lab setup for schools.

22/10/2021

16-chann16-Channel 12-bit PWM/Servo Driver I2C interface PCA9685 INR 598 available

Description:

If you want to make a robot which has lots of moving parts or if you want to control too many LEDs with PWM outputs, then the limited PWM outputs of your microcontroller would be a big problem for you. To overcome this problem, the only thing you should do is to get a 16-Channel 12-Bit PWM/Servo Driver.
You can control 16 free-running PWM outputs with 16-Channel 12-Bit PWM/Servo Driver using only 2 pins. You can even chain up 62 breakouts to control up to 992 PWM outputs.
It’s an I2C-controlled PWM driver with a built-in clock. That means you do not need to continuously send it to signal to tie up your microcontroller, it is completely free running!
It is 5V compliant, which means you can control it from a 3.3V microcontroller and still safely drive up to 6V outputs. This is good when you want to control white or blue LEDs with 3.4+ forward voltages. 6 address select pins so you can wire up to 62 of these on a single I2C bus, a total of 992 outputs.

# Arduino

02/10/2021

W1209 thermostat module INR 200/- available

Description:

W1209 thermostat module has a temperature sensor, keys, LED display, relay and requires DC 12V power supply. It is an affordable, good quality thermostat controller. Thermostats are devices that sense the temperature of a system so that the temperature is maintained at the desired set point or near to it. NTC temperature sensor allows the module to intelligently control varied electrical devices based on the temperature. The module consists of three switches to configure the various parameters including ON and OFF trigger temperatures. The relay can operate at voltages up to a maximum of 240V AC at 5A or 14V DC at 10A to power on.

.cc

28/09/2021

Pulse Sensor- Heart Rate Sensor INR 280/- available

Description:

The Pulse Sensor is a plug-and-play heart-rate sensor for Arduino. It can be used by students, artists, athletes, makers, and game & mobile developers who want to easily incorporate live heart-rate data into their projects. It essentially combines a simple optical heart rate sensor with amplification and noise cancellation circuitry making it fast and easy to get reliable pulse readings. Also, it sips power with just 4mA current draw at 5V so it's great for mobile applications. Live Heartbeats and BPM in your Project. Works with Arduino, micro:bit, littleBits, and most maker platforms.

28/09/2021

4-Channel Capacitive Touch Sensing Module INR 160/- available

Description:

This is a 4 switch digital touch sensor with capacitive sense technology, the TTP 224 IC offers capacitive sense input feed designed for touchpad control, followed by a 4- finger-sized touchpad. The board has a jumper’s arrangement to change the key press output mode in Timed or Toggle, Active High or Active Low. Separate jumper adjustments are provided for changing the response time of the pressed key: 60mS fast mode or 160mS in Low power. The output side of the board has 6 pin headers, with 4 pins to be connected with the digital I/O of any microcontroller board (Arduino, ARM STM32). 4 status LED SMD types are provided to check the status of each pressed key. TTP 224 4 Channel Digital Touch Sensor is compatible with all Arduino’s board.

26/09/2021

PLA for 3D printers & 3D pen INR 2490/- available

Description:

PLA 3d Filament Use High Purity Raw Materials That Have Low Shrinkage And Good Layer Bonding Features, Meeting Your Demands For Different Printing Projects With Higher Toughness. It Is 100% Made Of Environment-friendly Natural Materials. It's Biodegradable, Non-toxic, And Environmentally Friendly. Completely Dried For 24 Hours Before Packaging And Vacuum Sealed With Desiccants, Enable Much Smoother And More Stable Printing. Since The PLA Filament Is Prone To Moisture, Please Store It Into A Dry And Cool Place To Matiain Excellent Printing Performance. Full Mechanical Winding And Strict Manual Examination, Which Guarantee The Pla Filaments Tidy And Easy To Be Fed. Works Perfectly With Most Fdm 3d Printers On The Market.

22/09/2021

Glue Gun 40watt with Eight 11mm Glue Sticks Available

Description:

This is multipurpose Standard Temperature 40 Watt Hot Melt Glue Gun with Superior quality and user-friendly Glue Gun consists of a trigger that is pressed by the user to spray the Hot melted glue liquid adhesives on the surface of the broken items.

Our glue sprayers are extensively used in the toys, home appliance, furniture, fancy items, packaging, shipping companies as well as in DIY projects by hobbyist people and others.

This gun works with All color glue sticks with size if 11mm diameter. This glue stick is easily available to any online site as well as all local offline stores.

21/09/2021

Laser Module 650NM INR 225/- available

Description:

The Laser Diode Module is a 650NM 5V head composed of a light-emitting tube, condenser lens, and adjustable copper sleeve and it is assembled when delivered, the focal length of the lens is adjusted glued by strong glue stick, which can work directly after connecting to a 5V DC power supply.

Laser Diode Module is a breadboard friendly, low cost having the wavelength of 650nm and operating voltage of 5V. The laser head is composed of a light-emitting tube, condenser lens and adjustable copper sleeve and it is assembled when delivered, the focal length of the lens is adjusted and glued by strong glue stick, which can work directly after connecting to a 5v dc power supply.

21/09/2021

R307 Fingerprint Reader Sensor INR 1499/- available

Description:

R307 Fingerprint Module consists of optical fingerprint sensor, high-speed DSP processor, high-performance fingerprint alignment algorithm, high-capacity FLASH chips and other hardware and software composition, stable performance, simple structure, with fingerprint entry, image processing, fingerprint matching, search and template storage and other functions.

20/09/2021

Joystick Module INR 180/- available

Description:

This is a dual axis high quality JoyStick Module . It can be used to sense movements in 2 directions(axes). It also has a inbuilt switch which can be activated by pressing the stick.Directional movements are simply two potentiometers - one for each axis. Pots are ~10k each.

With the help of this Joystick Module, you can measure position coordinates on the X and Y axis by moving the "hat". It also contains a switch that is press-able by pushing the "hat".It also contains a switch that is press-able by pushing the "hat" down. Similar to the XBOX controller.

20/09/2021

4*4 Keypad Matrix INR 190/- available

Description:

This DC 12V 4x4 Matrix Keypad Membrane Switch is high-quality soft touch feeling button keypad with 100 million life-stroke lifespans and good resistance to environmental conditions. This DC 12V 4x4 Key Matrix Membrane Switch Keypad is a high-quality product at very low cost for your application needs.

This 16-button keypad provides a useful human interface component for microcontroller projects. Convenient adhesive backing provides a simple way to mount the keypad in a variety of applications.

The Keypad 4x4 features a total of 16 buttons in Matrix form. This is a membrane keypad with no moving parts. A female 8-pin berg connector is require for interfacing it with your microcontroller circuits.

18/09/2021

RFID Reader/Writer with Card & Tag INR 250/- available

Description:

This is RFID Reader/Writer RC522 SPI S50 CARD AND KEYCHAIN which works on non-contact 13.56mhz communication, is designed by NXP as low power consumption, low cost and compact size read and write chip, is the best choice in the development of smart meters and portable hand-held devices.

It uses the advanced modulation system, fully integrated at 13.56MHz with all kinds of positive non-contact communication protocols. Support 14443A compatible answer signal. DSP deal with ISO14443A frames and error correction.

This module can fit directly in handheld devices for mass production. The module uses the 3.3V power supply and can communicate directly with any CPU board by connecting through the SPI protocol, which ensures reliable work, good reading distance.

18/09/2021

Bluetooth Module HC-05 INR 350/- available

Description:

HC-05 6pin Bluetooth Module with Button Wireless Serial Bluetooth Module is a Bluetooth module for use with any microcontroller. It uses the UART protocol to make it easy to send and receive data wirelessly.

The HC-06 module is a slave only device. This means that it can connect to most phones and computers with Bluetooth but it cannot connect to another slave-only device such as keyboards and other HC-06 modules. To connect with other slave devices a master module would be necessary such as the HC-05 version which can do both master and slave.

Address

Delhi

Telephone

+919311541528

Website

http://www.prolifictech.in/

Alerts

Be the first to know and let us send you an email when prolific_tech_shopkart posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to prolific_tech_shopkart:

prolific_tech_shopkart

22/10/2021

02/10/2021

28/09/2021

28/09/2021

26/09/2021

22/09/2021

21/09/2021

21/09/2021

20/09/2021

20/09/2021

18/09/2021

18/09/2021

Address

Telephone

Website

Alerts

Contact The Business

Shortcuts

Share