IC Components Limited

IC Components Limited lC-components is a Hong Kong IC Components Limited supplier, established in 2001.

XG4H-2631 | 26-Position Board-to-Board Socket | OmronFeatures• Provides 26 female contacts in two rows.• Uses a 2.54 mm ...
30/09/2026

XG4H-2631 | 26-Position Board-to-Board Socket | Omron

Features
• Provides 26 female contacts in two rows.
• Uses a 2.54 mm contact pitch.
• Supports straight through-hole PCB mounting.
• Mates with compatible XG4C and XG8W plugs.
• Offers documented stacking heights of 10.1 mm with XG4C and 9.7 mm with XG8W.
• Includes a polarizing slot to help prevent incorrect mating.
• Uses gold-plated mating contacts and tin-plated solder terminals.
• Has a glass-filled PBT housing rated UL94 V-0.
• Operates from −55 °C to +105 °C without icing.
• Is specified for 50 mating cycles.

Practical Application Areas
• Industrial controller PCB assemblies
• Modular instrumentation boards
• Data acquisition equipment
• Board-to-board signal connections
• Serviceable control modules

Place Your Order Now ▶️: https://www.ic-components.com/products/Omron/xg4h-2631.jsp

PBSS4041NX,115 | 60 V, 6.2 A NPN Low-VCEsat Transistor | NexperiaFeatures• Supports a 60 V collector-emitter breakdown v...
28/09/2026

PBSS4041NX,115 | 60 V, 6.2 A NPN Low-VCEsat Transistor | Nexperia

Features
• Supports a 60 V collector-emitter breakdown voltage.
• Handles up to 6.2 A continuous collector current.
• Withstands a 15 A peak collector current for pulses up to 1 ms.
• Provides a maximum VCE(sat) of 210 mV at IC = 6 A and IB = 300 mA.
• Achieves a typical saturation resistance of 18 mΩ at IC = 4 A.
• Delivers a minimum DC current gain of 150 at IC = 4 A and VCE = 2 V.
• Provides a typical transition frequency of 125 MHz.
• Supports up to 2.5 W power dissipation under specified PCB mounting conditions.
• Uses a compact 4.5 × 2.5 × 1.5 mm SOT-89 surface-mount package.
• Offers AEC-Q101 qualification for demanding and automotive applications.

Practical Application Areas
• Electronic load switches
• Battery-powered equipment
• Power-management circuits
• Battery-charging circuits
• Motor power switches
• Fan-control circuits
• High-current switching stages

Place Your Order Now ▶️: https://www.ic-components.com/products/Nexperia/pbss4041nx,115.jsp

MBR40250TG | Switch-Mode Schottky Power Rectifier | onsemiFeatures• Supports a 250 V maximum repetitive reverse voltage....
24/09/2026

MBR40250TG | Switch-Mode Schottky Power Rectifier | onsemi

Features
• Supports a 250 V maximum repetitive reverse voltage.
• Handles up to 40 A average rectified forward current.
• Provides a maximum forward voltage of 0.97 V at 40 A and 25°C.
• Delivers soft recovery with a maximum reverse recovery time of 35 ns.
• Reduces switching losses in high-frequency power conversion.
• Helps suppress reverse-recovery oscillation and reduce EMI-filtering requirements.
• Withstands a 150 A non-repetitive peak surge current.
• Operates across a −65°C to +150°C junction-temperature range.
• Uses a durable, heatsink-compatible TO-220 through-hole package.
• Features lead-free, RoHS-compliant construction.

Practical Application Areas
• Switching power supplies
• Power-management systems
• AC-to-DC rectifiers
• DC-to-DC converters
• Freewheeling diode circuits
• Automotive power electronics
• Industrial control equipment
• Test and measurement instruments

Place Your Order Now ▶️: https://www.ic-components.com/products/AMI-Semiconductor-ON-Semiconductor/MBR40250TG.jsp

MCP2561FD-H/SN High-Speed CAN FD Transceiver | Microchip TechnologyFeatures• Supports Classical CAN and CAN FD communica...
21/09/2026

MCP2561FD-H/SN High-Speed CAN FD Transceiver | Microchip Technology

Features
• Supports Classical CAN and CAN FD communication at 2, 5, and 8 Mbps.
• Operates across a high-temperature range of −40°C to +150°C.
• Implements ISO 11898-2 and ISO 11898-5 physical-layer requirements.
• Provides a maximum propagation delay of 120 ns for high-speed communication.
• Includes a SPLIT output for common-mode stabilization with split termination.
• Offers Normal and low-power Standby modes with 5 µA typical standby current.
• Disconnects CANH and CANL when unpowered to prevent bus loading.
• Protects CANH and CANL against short circuits and automotive voltage transients.
• Provides CAN-bus ESD protection up to ±14 kV according to IEC 61000-4-2.
• Integrates thermal shutdown, brownout protection, and permanent-dominant fault detection.

Practical Application Areas
• Automotive CAN and CAN FD networks
• Electronic control units
• Battery-management systems
• Body-control modules
• Industrial automation equipment
• Programmable logic controllers
• Motor drives and servo systems
• Robotics and mobile machinery
• Agricultural and construction equipment

Place Your Order Now ▶️: https://www.ic-components.com/products/Micrel-Microchip-Technology/MCP2561FD-H-SN.jsp

LNK616PG | 700 V CV/CC Offline Flyback Switcher IC | Power IntegrationsFeatures• Integrates a 700 V power MOSFET, oscill...
17/09/2026

LNK616PG | 700 V CV/CC Offline Flyback Switcher IC | Power Integrations

Features
• Integrates a 700 V power MOSFET, oscillator, 6 V regulator, CV/CC controller, current limiter, and protection circuits.
• Eliminates the optocoupler, secondary-side controller, current-sense resistor, and control-loop compensation network.
• Supports universal-input 85–265 VAC flyback designs with an isolated transformer and suitable external circuitry.
• Delivers up to 5.5 W in an enclosed adapter or 6.1 W in an open-frame design under the datasheet’s stated thermal conditions.
• Provides a programmable switching frequency up to 85 kHz, a 55% maximum duty cycle, and ±7% frequency jitter for EMI reduction.
• Provides ±5% CV regulation and ±10% CC regulation over the specified line, component, and 0°C to +100°C junction-temperature range.
• Uses a seven-lead PDIP-8C through-hole package measuring approximately 9.05–9.83 × 6.10–6.60 × 3.18–3.68 mm, with 7.62 mm row spacing.

Practical Application Areas
• Mobile phone chargers
• Cordless phone chargers
• Low-power AC/DC adapters
• Portable audio device chargers
• PDA and handheld-device chargers
• Constant-voltage and constant-current battery chargers
• Low-power isolated flyback supplies
• LED driver power supplies

Place Your Order Now ▶️: https://www.ic-components.com/products/Power-Integrations/LNK616PG.jsp

PIC18F4525-I/PT | 40MHz 8-Bit Flash Microcontroller with 10-Bit ADC | Microchip TechnologyFeatures• Uses an enhanced 8-b...
14/09/2026

PIC18F4525-I/PT | 40MHz 8-Bit Flash Microcontroller with 10-Bit ADC | Microchip Technology

Features
• Uses an enhanced 8-bit PIC18 processor operating at up to 40MHz and 10 MIPS.
• Provides 48KB Flash program memory, approximately 3.8KB SRAM, and 1KB data EEPROM.
• Includes 36 programmable general-purpose I/O pins.
• Integrates a 13-channel 10-bit analog-to-digital converter and two analog comparators.
• Supports EUSART, SPI, and I²C-compatible serial communication.
• Provides CCP and Enhanced CCP modules for capture, compare, and PWM control.
• Includes four hardware timers, a watchdog timer, and high/low-voltage detection.
• Supports an internal oscillator, fail-safe clock monitoring, and two-speed oscillator startup.
• Supports ICSP programming, in-circuit debugging, and self-programmable Flash memory.
• Operates from 4.2V to 5.5V and −40°C to +85°C in a 44-pin 10mm × 10mm TQFP package.

Practical Application Areas
• Industrial control equipment
• Motor-control systems
• Sensor data-acquisition equipment
• HVAC and building controllers
• Appliance control boards
• Embedded measurement instruments
• Serial communication interfaces
• Legacy PIC18 system maintenance

Place Your Order Now ▶️: https://www.ic-components.com/products/Micrel-Microchip-Technology/PIC18F4525-I-PT.jsp

AT91SAM7X512B-AU | 55MHz ARM7 Microcontroller with Ethernet and CAN | Microchip TechnologyFeatures• Integrates a 55MHz A...
09/09/2026

AT91SAM7X512B-AU | 55MHz ARM7 Microcontroller with Ethernet and CAN | Microchip Technology

Features
• Integrates a 55MHz ARM7TDMI processor supporting 32-bit ARM and 16-bit Thumb instructions.
• Provides 512KB dual-plane Flash memory and 128KB high-speed SRAM.
• Includes a 10/100 Ethernet MAC supporting MII and RMII connections.
• Integrates a CAN 2.0A and 2.0B controller with eight programmable mailboxes.
• Provides one USB 2.0 Full-Speed device port with an integrated transceiver.
• Includes two USARTs, two SPI controllers, one master-mode TWI interface, and one SSC.
• Offers an eight-channel 10-bit ADC and 62 programmable I/O lines.
• Integrates thirteen Peripheral DMA Controller channels for efficient data transfers.
• Provides three 16-bit timer channels and a four-channel 16-bit PWM controller.
• Includes power-on reset, brownout detection, a watchdog timer, and an integrated 1.8V regulator.
• Supports JTAG, EmbeddedICE, Flash security, sector locking, and SAM-BA programming.
• Operates from −40°C to +85°C in a 100-lead 14mm × 14mm LQFP package.

Practical Application Areas
• Industrial Ethernet controllers
• CAN-based automation equipment
• Embedded communication gateways
• Factory monitoring systems
• Building automation controllers
• Networked data-acquisition equipment
• Industrial protocol converters
• Access-control equipment

Place Your Order Now ▶️: https://www.ic-components.com/products/Micrel-Microchip-Technology/AT91SAM7X512B-AU.jsp

LTC3207EUF | 600mA Universal Multi-Output LED/CAM Driver | Analog Devices Inc.Features• Integrates 12 universal LED cur...
07/09/2026

LTC3207EUF | 600mA Universal Multi-Output LED/CAM Driver | Analog Devices Inc.

Features
• Integrates 12 universal LED current sources and one high-current camera LED source.
• Delivers up to 600mA total output current.
• Provides up to 28mA from each universal LED output.
• Offers 64-step linear brightness adjustment for each universal LED channel.
• Supplies up to 425mA from the camera LED output with 16 brightness levels.
• Uses a low-noise 1x, 1.5x, and 2x charge pump with efficiency up to 91%.
• Supports independent brightness, on/off, blinking, and gradation control through a two-wire I²C interface.
• Operates from a 2.9V to 5.5V battery supply with an 850kHz switching frequency.
• Includes soft-start, slew-limited switching, short-circuit protection, thermal protection, and a two-second high-current safety timer.
• Uses a compact 24-lead 4mm × 4mm QFN package and requires only five external ceramic capacitors.

Practical Application Areas
• Video phones with QVGA or higher-resolution displays
• Mobile phones with main and secondary display backlighting
• Camera phones requiring LED flash or illumination control
• Portable devices with multiple independently controlled LEDs
• RGB indicator and decorative-lighting systems
• Keypad and user-interface backlighting
• Multi-channel status and notification lighting
• I²C-controlled LED lighting in battery-powered electronics

Place Your Order Now ▶️: https://www.ic-components.com/products/ADI(Analog-Devices,Inc.)/LTC3207EUF-PBF.jsp

04/09/2026

Established in Hong Kong in 2001, IC Components is an electronic components sourcing platform serving customers worldwide.

We support sourcing requirements involving integrated circuits, semiconductors, memory products, passive components, and power devices, including current, hard-to-find, and obsolete part numbers.

Our services cover MPN-based product searches, supply-option comparisons, alternative-part research, component inspection and testing, and international delivery.

Learn more about IC Components or submit your sourcing requirements:

https://www.ic-components.com/

Address

6H Block 1, Sherwood Court, Kingswood Villa, Tin Shui Wai, New Territories
Hong Kong
999077

Opening Hours

Monday 09:00 - 18:30
Tuesday 09:00 - 18:30
Wednesday 09:00 - 18:30
Thursday 09:00 - 18:30
Friday 09:00 - 18:30
Saturday 09:00 - 18:30

Website

Alerts

Be the first to know and let us send you an email when IC Components Limited posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share

Category