Wie sind die Öffnungszeiten?

Montag 08:00 - 17:00 Dienstag 08:00 - 17:00 Mittwoch 08:00 - 17:00 Donnerstag 08:00 - 17:00 Freitag 08:00 - 17:00

Tark Thermal Solutions

Startseite
Deutschland
Rosenheim
Tark Thermal Solutions

Kontaktinformationen, Karte und Wegbeschreibungen, Kontaktformulare, Öffnungszeiten, Dienstleistungen, Bewertungen, Fotos, Videos und Ankündigungen von Tark Thermal Solutions, Elektronikunternehmen, Kunstmuehlstrasse 12a, Rosenheim.

Tark Thermal Solutions (formerly Laird Thermal Systems) designs, develops and manufactures active thermoelectric modules, thermoelectric assemblies, specialty pumps and liquid cooling systems.

08/09/2026

Summer may be ending, but fun continues! ☀️🍂 Last Friday, our Liberec team got together at U Vodníka (an outdoor venue by the pond) to reconnect after the summer holidays. For the third year in a row, we enjoyed great weather, food, drinks, plenty of catching up, and a nohejbal game (futnet), a Czech favorite! ⚽

It was great to see David Stephenson, our Chief People Officer, in Liberec and have him join both the playing and chatting crews!

Great to have the team together again. Now, bring on the fall. 💪

03/09/2026

When a single underperforming transceiver can disrupt an entire AI workload, testing becomes just as critical as performance. AI is not only raising the bar for optical transceivers, but also for how they’re tested.

As data centers push toward 1.6T pluggables and co-packaged optics, transceivers must prove signal performance across their operating temperature range before deployment.

In high-volume production, that creates another challenge: getting from 0°C to 25°C to 70°C fast, precisely and repeatedly. That means fast, precise and repeatable temperature cycling during end-of-line production testing, where manufacturers have their last chance to catch a marginal unit.

And none of this would work without thermal management. See how it supports the process https://ow.ly/vEuj50ZIMiw

01/09/2026

As September begins, students around the world are heading back to school, building the knowledge and skills they will need for what comes next. 🎓

At Tark Thermal Solutions, we’re doing the same; preparing for future growth means more than developing new cooling technologies. It means strengthening the engineering and operational capabilities that turn those technologies into reliable, scalable solutions.

Across our global operations, we are investing in advanced manufacturing, in-house testing, automation, modern data systems, and a more agile supply chain. These capabilities help us move from thermal design to validated production and respond as applications become smaller, more powerful and more thermally demanding.

Because tomorrow’s thermal challenges require us to keep building, testing and learning today, creating the capabilities that will enable future innovation.

Curious how our investments in innovation can support your next project? Connect with us to learn more 👉 https://ow.ly/xFpH50ZHCJG or share your thermal challenge in the comments below! 👇

27/08/2026

One of the biggest competitive advantages is something many people never see:
✔️The validation process behind the product.

Most cooling systems can perform well on day one. The real question is how they perform after thousands of operating hours, repeated temperature cycling, vibration, and environmental stress.

Comprehensive testing helps ensure products deliver consistent performance throughout their operational life, not just when they leave the production line. That’s one reason leading OEMs trust Tark Thermal Solutions for critical applications.

🔗 See what's behind our testing process https://tark-solutions.com/thermal-design-services/testing

25/08/2026

Most people never see a Wavelength Selective Switch (WSS). Yet every time data moves across modern fiber networks, there's a good chance a WSS is deciding exactly where each wavelength should go.

What makes this remarkable is that the entire system depends on microscopic optical alignment.

A temperature change of just a few degrees can shift optical paths, affect refractive index, change liquid crystal behavior, or alter MEMS mirror positioning. The result? Higher insertion loss, increased crosstalk, or even misrouted wavelengths.

With precision thermoelectric cooling, the optical core remains thermally stable, helping WSS modules maintain predictable performance across changing environments.

Because in optical networking, even tiny temperature changes can have network-wide consequences. 👉Learn more https://ow.ly/jM1f50ZBTKE

20/08/2026

Designing a multistage TEC isn't just about achieving a high ΔT. ⏰ The real challenge is balancing temperature differential, heat pumping capability, package size, and power consumption, all at once.

The new MSX Series was developed with those tradeoffs in mind.

✔️ΔT up to 120 K
✔️Cold side down to 2.0 × 4.0 mm
✔️Up to 5 W heat pumping

For compact imaging systems where every millimeter matters https://ow.ly/l0E650ZBTRp

18/08/2026

What's the most expensive few-degree deviation in a clinical lab?🤔

A reagent that spent the weekend two degrees warm doesn't announce itself. The analyzer runs, reports a number, and the number is quietly wrong.

So, reagent storage and centrifuge equipment require a demanding combination: ±0.1°C stability, condensation control, low maintenance, and a footprint that doesn't push the instrument off the bench.

Our Thermoelectric Cooler Assemblies fit that brief. Solid-state, refrigerant-free, precise control in a compact package.
:
The challenge: diagnostic instruments are rarely standard-shaped. Odd cavity geometry, airflow already spoken for, a control loop holding set point while the centrifuge beside it dumps heat in bursts.

That's when a custom assembly pays for itself: thermal modeling of your actual enclosure, air-air, direct-air, or liquid-air, validated to your compliance standards.

Cheaper to solve at design than at instrument validation. View our custom thermoelectric solutions https://ow.ly/U3k150ZAUFI

What's the most expensive few-degree deviation in a clinical lab?🤔

A reagent that spent the weekend two degrees warm doesn't announce itself. The analyzer runs, reports a number, and the number is quietly wrong.

So, reagent storage and centrifuge equipment require a demanding combination: ±0.1°C stability, condensation control, low maintenance, and a footprint that doesn't push the instrument off the bench.

Our Thermoelectric Cooler Assemblies fit that brief. Solid-state, refrigerant-free, precise control in a compact package.

The challenge: diagnostic instruments are rarely standard-shaped. Odd cavity geometry, airflow already spoken for, a control loop holding set point while the centrifuge beside it dumps heat in bursts.

That's when a custom assembly pays for itself: thermal modeling of your actual enclosure, air-air, direct-air, or liquid-air, validated to your compliance standards.

Cheaper to solve at design than at instrument validation. View our custom thermoelectric solutions https://ow.ly/U3k150ZAUFI

13/08/2026

In what scenarios would a thermal engineer choose a thermoelectric cooler over other cooling methods? When precision, size, and stability matter as much as heat removal.

For more than 60 years, our engineers have helped customers apply thermoelectric cooling to lasers, detectors, medical devices, and analytical instruments, often in places where conventional cooling cannot fit or would introduce unwanted noise or vibration.

Today, our TEC portfolio includes solutions as small as 1.5 × 1.1 mm, models designed for temperatures up to 150°C, and multistage coolers capable of achieving a ΔT of up to 120 K.
And when a standard TEC is not enough, we can customize the module or integrate it into a complete thermal assembly. Learn more https://ow.ly/yxA550ZyZao

06/08/2026

Industrial equipment is becoming smarter. 🧠

✔ More sensors
✔ More automation
✔ More power electronics
✔ More AI
✔ More precision

Thermal management is one of the enabling technologies behind modern industrial automation. Without effective cooling, electronics lose efficiency, sensors drift, lasers become unstable, and system reliability suffers.

At Tark Thermal Solutions, we work with OEMs to solve these thermal challenges using one of the industry's broadest portfolios of active cooling technologies from precision thermoelectrics to custom liquid cooling systems.

Because the future of industrial automation depends on keeping it cool. 👉 Learn more https://ow.ly/RrOt50Zx0nb

04/08/2026

If someone tells you they have the "best" cooling technology, they're oversimplifying thermal management. Because the best solution depends on the application.

Every application has different thermal demands, mechanical constraints, and performance goals. The solution that works perfectly for one system may fail in another.

Depending on what your system needs, the answer could be:
✔ Thermoelectric coolers for pinpoint temperature control
✔ Thermoelectric Assemblies for Air, Liquid, and Direct cooling and heating
✔ Recirculating chillers for stable coolant temperatures
✔ Pumps for reliable coolant circulation
✔ Custom liquid cooling systems for demanding applications
✔ Or an integrated solution combining multiple technologies

Because great thermal management isn't about selling technology, it's about choosing the right one. Let's discuss your thermal challenge https://ow.ly/BtYV50Zw6A2

Adresse

Kunstmuehlstrasse 12a
Rosenheim
83026

Öffnungszeiten

Montag	08:00 - 17:00
Dienstag	08:00 - 17:00
Mittwoch	08:00 - 17:00
Donnerstag	08:00 - 17:00
Freitag	08:00 - 17:00

Webseite

https://www.tark-solutions.com/

Benachrichtigungen

Lassen Sie sich von uns eine E-Mail senden und seien Sie der erste der Neuigkeiten und Aktionen von Tark Thermal Solutions erfährt. Ihre E-Mail-Adresse wird nicht für andere Zwecke verwendet und Sie können sich jederzeit abmelden.