Jaká je otevírací doba?

Pondělí 08:00 - 17:00 Úterý 08:00 - 17:00 Středa 08:00 - 17:00 Čtvrtek 08:00 - 17:00 Pátek 08:00 - 17:00

ComAp, U Uranie 1612/14a, Praha (2026)

02/10/2026

⚓ 𝗣𝗮𝗿𝘁𝗻𝗲𝗿𝘀𝗵𝗶𝗽 𝗼𝗻 𝗮 𝘀𝘁𝗲𝗮𝗱𝘆 𝗰𝗼𝘂𝗿𝘀𝗲: Ardora S.A. visits Prague

We recently welcomed Ardora's Antonio Martín González, Javier Martínez Nazara, Daniel Romero, Gonzalo Martínez Rodríguez and Adrián Casal for two days at our Prague HQ.

Founded in Vigo, Spain, back in 1975, Ardora carries an incredible half a century of experience, keeping engines running for the maritime and industrial sectors. That's exactly the kind of depth that makes them one of our most seasoned partners in the region, with marine control systems now a growing part of that work.

Between an evening in Prague's Old Town and a walk through Prague Castle, the two days made room for real business too: sessions on marine trends and certification, an introduction to our 𝗜𝗻𝘁𝗲𝗹𝗶𝗗𝗿𝗶𝘃𝗲 𝟳𝟬𝟬 𝗠𝗮𝗿𝗶𝗻𝗲 engine supervision system, and a tour of our Prague offices.

💬 | "𝘛𝘩𝘦 𝘊𝘰𝘮𝘈𝘱 𝘱𝘳𝘰𝘥𝘶𝘤𝘵 𝘪𝘴 𝘢 𝘣𝘦𝘯𝘤𝘩𝘮𝘢𝘳𝘬 𝘪𝘯 𝘵𝘩𝘦 𝘮𝘢𝘳𝘬𝘦𝘵, 𝘢𝘯𝘥 𝘵𝘩𝘦 𝘵𝘦𝘤𝘩𝘯𝘪𝘤𝘪𝘢𝘯𝘴 𝘢𝘳𝘦 𝘱𝘳𝘦𝘮𝘪𝘶𝘮. 𝘛𝘩𝘦𝘺 𝘬𝘯𝘰𝘸 𝘱𝘦𝘳𝘧𝘦𝘤𝘵𝘭𝘺 𝘩𝘰𝘸 𝘢 𝘴𝘩𝘪𝘱 𝘸𝘰𝘳𝘬𝘴. 𝘛𝘩𝘢𝘵 𝘨𝘪𝘷𝘦𝘴 𝘶𝘴 𝘱𝘦𝘢𝘤𝘦 𝘰𝘧 𝘮𝘪𝘯𝘥. 𝘐𝘯 𝘰𝘶𝘳 𝘦𝘭𝘦𝘤𝘵𝘳𝘰𝘯𝘪𝘤𝘴 𝘥𝘦𝘱𝘢𝘳𝘵𝘮𝘦𝘯𝘵 𝘢𝘵 𝘈𝘳𝘥𝘰𝘳𝘢 𝘸𝘦'𝘷𝘦 𝘨𝘳𝘰𝘸𝘯 𝘢 𝘭𝘰𝘵 𝘪𝘯 𝘵𝘸𝘰 𝘺𝘦𝘢𝘳𝘴, 𝘢𝘯𝘥 𝘵𝘩𝘪𝘴 𝘨𝘳𝘰𝘸𝘵𝘩 𝘪𝘴 𝘥𝘪𝘳𝘦𝘤𝘵𝘭𝘺 𝘳𝘦𝘭𝘢𝘵𝘦𝘥 𝘵𝘰 𝘊𝘰𝘮𝘈𝘱," says Javier, their Technical Manager.

Antonio, Ardora's owner, calls ComAp a strategic partner and the relationship "almost a family". The feeling is mutual.

Muchas gracias to Ardora for their continued trust, and for a strategic relationship built on real hands-on collaboration, not just contracts.

Here's to the next chapter of keeping Spain's marine sector powered and in control.

01/10/2026

📟 𝗥𝗶𝗻𝗴 𝗼𝗿 𝗦𝘁𝗮𝗿, 𝘆𝗼𝘂𝗿 𝗰𝗼𝗻𝘁𝗿𝗼𝗹𝗹𝗲𝗿𝘀 𝗸𝗲𝗲𝗽 𝘁𝗮𝗹𝗸𝗶𝗻𝗴

Failure in communication between controllers is not an option. Especially when it comes to mission-critical power.

That's why we introduced the 𝗘𝘁𝗵𝗲𝗿𝗻𝗲𝘁 𝗜𝗻𝘁𝗲𝗿-𝗖𝗼𝗻𝘁𝗿𝗼𝗹𝗹𝗲𝗿 𝗖𝗼𝗺𝗺𝘂𝗻𝗶𝗰𝗮𝘁𝗶𝗼𝗻 (𝗘𝗜𝗖𝗖), our solution for inter-controller communication over Ethernet, whether it's Ring topology for datacentres or Star topology for rental fleets.

It means real, practical gains on both sides:
🔺 datacentres keep running even if a controller, or an entire switchboard, drops out
🔺 rental fleets add or remove gen-sets without touching a single cable
🔺 no deep networking knowledge needed, and ready to order

🎥 Watch Petr Chvojka, our Senior Product Manager, break it down in the video below, and for the full specs, check out the product page 👉 www.comap-control.com/products/communications/cm-eicc/

30/09/2026

🍂 𝗔𝘂𝘁𝘂𝗺𝗻, 𝗺𝗮𝗱𝗲 𝗯𝘆 𝗵𝗮𝗻𝗱 | workshop with Aranžérie

On the last morning of September, a few colleagues from our Prague office spent some time away from their desks, working with glass bowls and dried flowers instead.

Leading the session was a familiar team from Aranžérie, the social enterprise of Společnost E (Czech Epilepsy Association), back with us after several mornings like this one. Some colleagues made autumn wreaths, others tried a "Desert in a glass bowl" arrangement, all moss, branches and small found things.

It may be that the materials change with the season. But what stays the same is why we keep doing this. Aranžérie's mission is to create job opportunities for people who are disadvantaged in the labour market.

The workshops just happen to be the nicest part of how that mission shows up for us. And we are already looking curious what the next one in the spring brings.

29/09/2026

We're gearing up for Electricity Transformation Canada!

📅 19–21 October, 2026
📍 Enercare Centre, Toronto | Ontario
📌 Booth 626

Canada's energy sector is leaning hard into hybrid microgrids (HMG) to balance renewables, storage, and traditional generation on one site. That's exactly where we come in. Our control platforms are already doing that on projects across North America.

Our team, Murray Fipke, Eric MacLeod, Ed Knaggs, and Ross Neufeld will be on-site and more than happy to talk through where ComAp's HMG solutions fit into your projects.

Swing by Booth 626 to get hands-on with our HMG starter kit and see how 𝗜𝗻𝘁𝗲𝗹𝗶𝗡𝗲𝗼 𝟲𝟬𝟬𝟬, 𝗜𝗻𝘁𝗲𝗹𝗶𝗡𝗲𝗼 𝟱𝟱𝟬𝟬, and 𝗜𝗻𝘁𝗲𝗹𝗶𝗚𝗲𝗻 𝟭𝟬𝟬𝟬 work together to bring generation, storage, and loads under one control setup.

All designed to help you optimise performance, simplify integration, and future-proof your energy projects.

Catch you in Toronto!

25/09/2026

𝗖𝘇𝗲𝗰𝗵 𝗦𝗗𝗚 𝗔𝘄𝗮𝗿𝗱𝘀 𝟮𝟬𝟮𝟲 | ComAp wins Innovation & Technology with Australian microgrid

🏆 Exciting news: ComAp has won the Innovation and Technology category at the Czech SDG (Sustainable Development Goals) Awards 2026.

The category recognises technology solutions driving positive social or environmental change. The award went to our hybrid microgrid project Ausgrid and Yurika built with our technology in Merriwa, Australia, and we're grateful to both for their trust and support throughout the project.

Organised by the Asociace společenské odpovědnosti (Association of Social Responsibility) since 2017, the SDG Awards are one of Czechia's most prestigious sustainability recognitions, judged this year against roughly 200 entries. Merriwa made the Top 5 shortlist earlier this year, and the winners were announced last week at the "Sustainability is not Dead" summit in Prague.

A vulnerable community at the far end of the grid, Merriwa used to be the last town back online after a storm or bushfire. Now, thanks to our smart control at its heart run by InteliNeo 6000, the microgrid switches it to local supply within minutes, and sustains it for hours until the main feeder comes back.

💬 | "𝘔𝘰𝘳𝘦 𝘵𝘩𝘢𝘯 𝘢𝘯𝘺𝘵𝘩𝘪𝘯𝘨, 𝘵𝘩𝘪𝘴 𝘳𝘦𝘤𝘰𝘨𝘯𝘪𝘵𝘪𝘰𝘯 𝘨𝘰𝘦𝘴 𝘰𝘶𝘵 𝘵𝘰 𝘰𝘶𝘳 𝘵𝘦𝘢𝘮 𝘪𝘯 𝘈𝘶𝘴𝘵𝘳𝘢𝘭𝘪𝘢. 𝘛𝘩𝘦𝘺 𝘩𝘦𝘭𝘱𝘦𝘥 𝘈𝘶𝘴𝘨𝘳𝘪𝘥 𝘢𝘯𝘥 𝘠𝘶𝘳𝘪𝘬𝘢 𝘵𝘶𝘳𝘯 𝘢 𝘴𝘮𝘢𝘳𝘵 𝘪𝘥𝘦𝘢 𝘪𝘯𝘵𝘰 𝘢 𝘮𝘪𝘤𝘳𝘰𝘨𝘳𝘪𝘥 𝘵𝘩𝘢𝘵 𝘸𝘰𝘳𝘬𝘴 𝘧𝘰𝘳 𝘵𝘩𝘦 𝘱𝘦𝘰𝘱𝘭𝘦 𝘰𝘧 𝘔𝘦𝘳𝘳𝘪𝘸𝘢. 𝘐'𝘮 𝘩𝘢𝘱𝘱𝘺 𝘵𝘰 𝘴𝘦𝘦 𝘰𝘶𝘳 𝘵𝘦𝘤𝘩𝘯𝘰𝘭𝘰𝘨𝘺 𝘩𝘦𝘭𝘱 𝘢𝘤𝘤𝘦𝘭𝘦𝘳𝘢𝘵𝘦 𝘵𝘩𝘦 𝘴𝘩𝘪𝘧𝘵 𝘵𝘰 𝘳𝘦𝘯𝘦𝘸𝘢𝘣𝘭𝘦 𝘦𝘯𝘦𝘳𝘨𝘺, 𝘢𝘯𝘥 𝘨𝘪𝘷𝘦 𝘤𝘰𝘮𝘮𝘶𝘯𝘪𝘵𝘪𝘦𝘴 𝘵𝘩𝘦 𝘴𝘵𝘢𝘣𝘭𝘦, 𝘳𝘦𝘴𝘪𝘭𝘪𝘦𝘯𝘵 𝘱𝘰𝘸𝘦𝘳 𝘵𝘩𝘦𝘺 𝘯𝘦𝘦𝘥."
— Ivana Pokorná (Ježková), ESG Manager at ComAp

🌱 Congratulations to the whole team: Hazem Kenawy, Sebastian Moore, Alex Nikielski, Nigel Vaughan, Joshua Andrews, Dave Fox and Paul Croker on a well-earned win.

🔗 More on the project behind the award 👉 www.comap-control.com/insights/powering-resilience-at-the-edge-of-the-grid/
_ _ _ _ _
📸 credit: Petr Klapper / Fotograf & Asociace společenské odpovědnosti

24/09/2026

𝗘𝗺𝗽𝗼𝘄𝗲𝗿𝗶𝗻𝗴 𝗘𝗺𝗽𝗹𝗼𝘆𝗲𝗲𝘀 | Alessia Dittadi, Administration Officer, ComAp Italy

From Yokohama, and on to ComAp Italy in Quinto di Treviso, near Venice.

Alessia joined ComAp Italy in late 2019 as a junior Admin Officer, and has spent the years since outgrowing that title. She played a hands-on part in one of the company's biggest internal system overhauls, and has since stepped up to manage a trickier corner of the business: the administrative side of project operations.

💬 | "𝘞𝘩𝘦𝘯 𝘸𝘦 𝘳𝘰𝘭𝘭𝘦𝘥 𝘰𝘶𝘵 𝘵𝘩𝘦 𝘯𝘦𝘸 𝘌𝘙𝘗 𝘴𝘺𝘴𝘵𝘦𝘮 𝘪𝘯 2022, 𝘈𝘭𝘦𝘴𝘴𝘪𝘢 𝘸𝘢𝘴 𝘰𝘯𝘦 𝘰𝘧 𝘵𝘩𝘦 𝘱𝘦𝘰𝘱𝘭𝘦 𝘸𝘩𝘰 𝘮𝘢𝘥𝘦 𝘪𝘵 𝘢𝘤𝘵𝘶𝘢𝘭𝘭𝘺 𝘸𝘰𝘳𝘬. 𝘚𝘩𝘦'𝘴 𝘴𝘪𝘯𝘤𝘦 𝘵𝘢𝘬𝘦𝘯 𝘰𝘷𝘦𝘳 𝘵𝘩𝘦 𝘢𝘥𝘮𝘪𝘯 𝘴𝘪𝘥𝘦 𝘰𝘧 𝘱𝘳𝘰𝘫𝘦𝘤𝘵 𝘰𝘱𝘦𝘳𝘢𝘵𝘪𝘰𝘯𝘴, 𝘰𝘯𝘦 𝘰𝘧 𝘵𝘩𝘦 𝘮𝘰𝘴𝘵 𝘤𝘰𝘮𝘱𝘭𝘦𝘹 𝘱𝘢𝘳𝘵𝘴 𝘰𝘧 𝘵𝘩𝘦 𝘸𝘩𝘰𝘭𝘦 𝘴𝘺𝘴𝘵𝘦𝘮, 𝘢𝘯𝘥 𝘴𝘩𝘦 𝘫𝘶𝘴𝘵 𝘨𝘦𝘵𝘴 𝘰𝘯 𝘸𝘪𝘵𝘩 𝘪𝘵."
— Piero Piccolotto, Managing Director, ComAp Italy

Away from the spreadsheets, she's also the one who pulls ComAp Italy's team events together, and often the first friendly voice customers and colleagues get on the phone.

Piero puts it down to her innovative mindset and her ease with people, colleagues and customers alike, and it's the way she brings that together that makes the company's values feel real, not just something printed on a wall.

It may be a different kind of control room to the ones ComAp builds. But it runs on the same idea: get the process right, and everything downstream gets simpler.

Another name behind ComAp's day-to-day, and one more reason it runs the way it does.

23/09/2026

Next stop on our list: Smart Energy Forum in Prague

📅 October 14–15, 2026
📍 PVA Expo Prague, Czech Republic | Stand 2/56

Another year has passed, and the biggest event in modern energy in the heart of Europe is bringing us back to our hometown, and we can‘t miss out!

This time, Prague will see us showcasing our smart control solutions for hybrid microgrids – the advanced InteliNeo controller, designed for seamless management of all energy assets within microgrid systems, along with InteliNeo 530 BESS for battery storage control.

You'll find us at Stand 56 in Hall 2. Stop by to meet our team, Michal Vrubel with Jaroslav Gajdičiar and Martin Karvánek who will give you a hands-on demo experience of our HMG site simulator. They’ll be happy to answer your questions and guide you through how our solutions work in real time.

⚡ Come discover how our smart control can drive your energy self-sufficiency and savings.

Catch you in Letňany!

22/09/2026

Doors are open at Solar & Storage Live UK, and Stand J31 is ready to go ⚡

📍 The NEC | Birmingham, UK
📌 Stand J31

Swing by for a hands-on look at our HMG site simulator: see how InteliNeo coordinates PV, BESS and gen-sets in real time, live on the stand. Plus, a first look at our Advanced Reporting! A dashboard for hybrid sites to validate that the BESS investment is delivering its maximum value.

Shawn Shepherd, Oliver Merz, Carl Nottingham, Hassaan Minhas and Francois Ruchon are on the stand for all three days, ready to talk through your project.

Come find us at the NEC!

21/09/2026

Verona, we're on our way to our first Solar & Storage Live Italia!

📅 7–8 October 2026
📍 Veronafiere | Verona, IT
📌 Stand E35

Brand and source-agnostic microgrid controls are still the sharpest way to answer one question: how do you run PV, BESS and gen-sets under one control approach without overcomplicating the site? In Italy, that question has now a regulatory edge.

Under ARERA Resolution 385/2025, PV and wind plants from 100kW upwards connected to medium voltage need a Central Plant Controller (CCI).

Come see how our 𝗖𝗖𝗜 turns that requirement into a head start on smarter asset management, alongside a live look at 𝗜𝗻𝘁𝗲𝗹𝗶𝗡𝗲𝗼 coordinating PV, BESS, cogeneration, and gen-sets on our Hybrid Microgrid site simulator.

Find our team, Marcello Melchiorri, Manuel Toniolo and Pavla Freitas (Cevelova), on stand E35 for both days, ready to walk you through how ComAp solutions can give you a head start and turn that requirement into an opportunity.

⚡ Catch us in Verona.

18/09/2026

𝗡𝗲𝘄 𝘃𝗶𝗱𝗲𝗼 𝗰𝗮𝘀𝗲 𝘀𝘁𝘂𝗱𝘆 𝗶𝗻: ComAp's new generation Marine Engine Control, stress-tested on Germany's Kiel Canal ⚓

⚡ New engine control doesn't earn trust at sea. It has to prove itself on the test bench first, under a partner who won't let anything sloppy through.

𝗦𝗗𝗧 (𝗦𝗰𝗵𝗶𝗳𝗳𝘀𝗱𝗶𝗲𝘀𝗲𝗹𝘁𝗲𝗰𝗵𝗻𝗶𝗸 𝗞𝗶𝗲𝗹) has spent 50 years building and maintaining marine propulsion engines and gen-sets, the last 15 as ComAp's trusted Service and Solution Partner. A perfect validation partner to run trials for our 𝗜𝗻𝘁𝗲𝗹𝗶𝗗𝗿𝗶𝘃𝗲 𝟳𝟬𝟬 𝗠𝗮𝗿𝗶𝗻𝗲 📟 ahead of release.

With their experience in combination with their unique hydro test bench, SDT got exclusive early access to InteliDrive 700 Marine and tested it on a Scania variable-speed engine with InteliSCADA visualisation on an InteliVision 1550 Marine display. SDT's hydro test bench itself is controlled by our InteliSys 2000.

Now validated on live marine engines, the controller gives SDT a cybersecurity-compliant platform it can specify with confidence, with marine Power Management Systems next for the partnership.

To top it all off, it is also available for orders.

🎥 Check the video below, & for more detail, go to the full case study here 👉 www.comap-control.com/insights/validating-a-new-marine-engine-controller-with-comap-s-service-and-solution-partner-in-germany/

ComAp

02/10/2026

01/10/2026

30/09/2026

29/09/2026

25/09/2026

24/09/2026

23/09/2026

22/09/2026

21/09/2026

18/09/2026

Adresa

Otevírací doba

Telefon

Web

Upozornění

Kontaktovat Společnost

Odkazy

Sdílet

Kategorie

Žádost o odstranění nabídky

Pondělí	08:00 - 17:00
Úterý	08:00 - 17:00
Středa	08:00 - 17:00
Čtvrtek	08:00 - 17:00
Pátek	08:00 - 17:00