KNX CYPRUS-knxcy.com

17/03/2026

Αναζητούμε συνεργάτη με εμπειρία στον προγραμματισμό KNX εγκαταστάσεων μέσω ETS software.

📌 Η συνεργασία αφορά:
• Προγραμματισμό ανά έργο (part-time συνεργασία)
• Ευέλικτο ωράριο – ο χρόνος υλοποίησης μπορεί να κανονίζεται ανάλογα με τη διαθεσιμότητα

✅ Απαραίτητα προσόντα:
• Γνώση και εμπειρία στο ETS software #
📍 Περιοχή: Κύπρος

Αν ενδιαφέρεσαι ή γνωρίζεις κάποιον κατάλληλο, στείλε μήνυμα για περισσότερες πληροφορίες!

#εργασία

17/12/2025

https://gvshome.com/product/knx-smart-touch-s10/

KNX Smart Touch S10 is a 10.1-inch KNX smart control panel with a screen resolution of up to 1280*800.In addition to integrating KNX device control, it also connects to a SIP intercom system, combining indoor and outdoor communication into one entity.

17/12/2025

https://gvshome.com/product/knx-commissioning/

KNX Commissioning is designed for an intelligent building control system, which is used for producing and monitoring KNX system voltage, and also used for facilitating communication between the PC and the KNX system. The device supports 2 power supply: DC interface and Type-C interface. It has 2 out...

24/11/2025

New awarded Push button series

10/03/2025

KNX Universal Dimming Actuator 1/2/4-Fold

KNX Universal Dimming Actuator,1/2/4-Fold (hereinafter referred to as Dimmer) has 1/2/ 4 output channels, and it can connect with dimmable lamps (such as incandescent lamps, halogen lamps, energy-saving lamps, LED, etc.), and you can dim, preset scene, switch these lamps or other operations via the bus. In addition, as well as KNX Data Secure.

10/03/2025

KNX CO₂ sensor, 55mm

KNX CO₂ sensor,55mm is mainly applied in building control system, connected to the bus via KNX connection terminals and installed together with other devices on the bus to become a system. It’s functionally simple and intuitive to operate. Users can plan according to their own needs to performs these functions in the system.

10/03/2025

KNX Presence Sensor, Microwave

Diameter/radius 8m, max. mounting height 4m. With 24GHz microwave detection technology. Support 4 presence detector channels, and the first channel with 3 levels control, master/slave work mode, Constant lighting Control, RTC controller, Logic and scene group functions. Support KNX secure protocoalIntallation: Ceiling-mounted

10/03/2025

KNX GPS Weather Station

The KNX GPS Weather Station for the KNX building bus system measures temperature, wind speed, brightness and recognizes precipitation. All values can be used for the control of limit dependent switching outputs. States can be linked via AND logic gates and OR logic gates. A GPS receiver provides the time and location for calculating the position of the sun (azimuth, elevation). The integrated shading control system allows the sun shading of eight Facades to be controlled.

10/03/2025

KNX GPS Weather Station Pro

The KNX GPS Weather Station Pro for the KNX building bus system measures temperature, wind speed, wind direction, brightness air humidity and air pressure. It recognizes precipitation and receives the GPS signal for time and location. In addition, using location coordinates and the time, it calculates the exact position of the sun (azimuth and elevation).

10/03/2025

The KNX Dual Presence Sensor, PIR&Ultrasonic integrates advanced PIR and Ultrasonic sensor technologies in one unit. The combination of these technologies helps to eliminate false triggering problems even in difficult applications

29/07/2024

KNX Smart Touch S7 is a 7-inch KNX smart control panel with a screen resolution of up to 1440*720.In addition to integrating KNX device control, it also connects to a SIP intercom system, combining indoor and outdoor communication into one entity. App for iOS and android.

gvshome.com/product/knx-smart-touch-s7/

29/07/2024

KNX Smart Touch S3 with SIP and iOS android app. 3 physical push buttons and a variety of features
gvshome.com/product/knx-smart-touch-s3