Wi-Tek Tech Support

11/08/2026

Quick configuration guide for WIKING CPE

Fast point‑to‑point wireless + Wi‑Tek Cloud remote management, no complex configuration required📶
1️⃣ Transmitter: Set DIP switch to “H”, connect PoE adapter & internet, power on
2️⃣ Receiver: Set DIP switch to “C”, connect PoE adapter, power on
3️⃣ Pairing: Hold reset button on both devices for 3s. Fast‑blinking power light = pairing; lit signal LEDs = success (more lights = stronger signal)
4️⃣ Open Wi‑Tek Cloud APP, create project with name & password
5️⃣ Input SN & last 6 digits of MAC, add devices. Both CPEs online for cloud control!

Perfect for surveillance, industrial & outdoor wireless projects🏗

📧 Email: [email protected]
🌐 Website: www.wireless-tek.com
https://youtu.be/ZUjeuK4XqZw

Quick configuration guide for WIKING CPEFast point‑to‑point wirel...

28/05/2026

Wi-Tek Cloud Easy Smart Managed Switch Quick Setup Guide
Simplify your network deployment with Wi-Tek Cloud Easy Smart Manager Switch! ⚡☁
We’ve streamlined the cloud configuration process to help you finish device setup and cloud management in minutes, no complex operations required.

Check out our 4-step quick configuration guide for seamless deployment 📝

1️⃣ Power & Network Connection
Power on the switch, then connect it to the internet via an Ethernet cable to prepare for cloud pairing.

2️⃣ Create a Project on Witek Cloud App
Open the Witek Cloud App, tap the “+” icon, select Universal Project, set your custom project name & password, and save the project.

3️⃣ Add Switch to Cloud Project
Scan the device SN barcode, chooseCloud Management, run Auto Detect, and input the last 6 digits of the device MAC address to complete device binding.

4️⃣ Verify Configuration Deployment
Connect data transmission devices, disable the corresponding port function. Consistent off status of both cloud and local port indicators means the configuration takes effect successfully.

Effortless cloud management, stable network performance, and faster on-site setup for your business network solutions! 🚀

📧 Email: [email protected]
🌐 Website: www.wireless-tek.com

21/05/2026

Need a quick & easy setup for your Wi-Tek Outdoor Cloud Switch? 🛠 We’ve got you covered!
Follow these 5 simple steps to get your IP65 outdoor switch fully cloud-managed in minutes. Ideal for CCTV, FTTx and all outdoor network deployments! ⏱

✨ Wi-Tek Outdoor Switch Quick Cloud Configuration Steps

1️⃣ Hardware Connection
Power on the switch and connect it to a stable internet network.

2️⃣ Create Cloud Project
Open Wi-Tek Cloud APP, tap + > select Universal Project. Enter a project name & password, then save to create.

3️⃣ Add Device
Scan the switch rear QR code, select Cloud Management. Use Auto Detect and enter the last 6 MAC digits to bind the device.

4️⃣ Check Online Status
Once bound, the switch shows online on the cloud. You can remotely view real-time device status & information.

5️⃣ Test Configuration
Connect your camera to the switch port, then turn off port PoE via cloud. Both cloud & local port indicators turn off, confirming successful configuration ✅

💡 Key Advantages
FeaturingIP65 waterproof design, wide temperature tolerance (-30℃~60℃), stable gigabit transmission and flexible cloud remote management, perfect for outdoor surveillance.

Simplify your outdoor network deployment with Wi-Tek cloud switches! Fast setup, zero complexity 🚀

13/05/2026

🤝 Simplify Your Network Setup with Wi-Tek Cloud L2 Switch! 🚀

Tired of complicated switch configuration? Our new technical video walks you through the Quick Configuration Guide for Wi-Tek Cloud L2 Switch—only 5 simple steps to get your device up and running in minutes! ⏱

Follow along with our step-by-step tutorial to master cloud management effortlessly:
✅ Step 1: Hardware Connection – Power on the switch and connect to the Internet.
✅ Step 2: Create a Project – Open Wi-Tek Cloud APP, tap the + sign, select Universal Project, enter your project name & password, and click Add.
✅ Step 3: Device Addition – Scan the QR code on the switch’s back, click Auto Detect, and enter the last 6 digits of the MAC address.
✅ Step 4: Cloud Status Check – Confirm your device is online and view all device info anytime, anywhere.
✅ Step 5: Configuration Test – Connect a camera, select the port, turn off the port’s POE function, and verify the indicator status (both cloud and local indicators will turn off).

Designed for efficiency and ease of use, Wi-Tek Cloud L2 Switch supports flexible cloud management, reliable security, and seamless deployment—perfect for small and medium-sized enterprise networking needs 🏢✨
Have questions about the configuration process? Drop them in the comments—our technical team is here to help! 💬

📧 Email: [email protected]
🌐 Website: www.wireless-tek.com

09/05/2026

Wi-Tek Independent Cloud AP Quick Configuration Guide
🔧 Easy Setup, Full Control!

Set up your Wi-Tek Independent Cloud AP in just 7 simple steps — no complicated professional skills required, get your WiFi network online in minutes! 🚀

✅ Step 1 Hardware Connection
Connect the AP to your router’s LAN port and power it on.

✅ Step 2 Create a Project
Open Wi-Tek Cloud APP → Tap "+" → Select Universal Project → Fill in name & password → Save.

✅ Step 3 Add AP Device
Scan the QR code on the AP back to add the device quickly.

✅ Step 4 Choose Management Mode
No AC → Select Cloud Management
With AC → Select AC Gateway Mode

✅ Step 5 Identify & Add Device
Auto Detect → Enter last 6 digits of MAC address → Device shows in topology diagram after confirmation.

✅ Step 6 Configure WiFi
Toolkit > Basic > WiFi-Settings
Set SSID & WiFi password → Save settings.

✅ Step 7 Verify Connection
Turn on phone WLAN → Connect to the new WiFi → Enjoy stable internet access.

Simple, fast and reliable cloud AP deployment for office, store and home network!

📧 Email: [email protected]
🌐 Website: www.wireless-tek.com

08/07/2025

📡 WI-LTE117-O(V2) | 4G LTE Outdoor Router
✔ 150Mbps 4G Cat4 Speed
✔ Dual Ethernet + Dual PoE Output
✔ IP65 Weatherproof & SD-LAN Support
✔ Cloud & Web Managed – Reliable Network Anywhere 🌍

🔋 Pair with WI-PS306GF-UPS(V4)
⚡ Solar Powered PoE Switch
⚙ 90W PoE++ + SFP + RS-485
🔧 Smart features: PoE watchdog, VLAN, Extend
☀️ PV/Battery/DC Inputs for green & remote deployments

✅ Ideal for solar-powered surveillance & IoT in off-grid areas!

🔗 Product Website: https://www.wireless-tek.com/product_list.php?lm=49
🌐 Official Website: www.wireless-tek.com
✉️ Contact us: [email protected]

07/07/2025

🎥 Capacitación de Productos Wi-Tek en Español – Línea Completa y Configuraciones 🇪🇸

Descubre toda la gama de productos de Wi-Tek en nuestro nuevo video de capacitación en español – desde switches y equipos inalámbricos hasta CPEs y soluciones en la nube.
👉 Incluye tutoriales prácticos de configuración y consejos útiles para la instalación.

¡Míralo ahora y lleva tus habilidades técnicas al siguiente nivel!
🔗 https://youtu.be/Wl-Mn-AXSwo?si=xtvWQvJ3jJqedlgs

04/07/2025

📡 Wi-Tek EasyMesh einfach erklärt! ☁️
In unserem neuen Video zeigen wir, wie Sie mit dem Wi-Tek Cloud-Tool ein stabiles Mesh-Netzwerk aufbauen – schnell & unkompliziert!
✅ WI-AX3000M als Mesh-Router
✅ WI-AP717MP & WI-AP718M als Slave-Knoten
✅ Schritt-für-Schritt per Cloud-App
Perfekt für großflächige WLAN-Abdeckung ohne Komplexität!
🎬 Jetzt ansehen und erfahren, wie einfach Mesh sein kann!

📽️ Watch the full video to learn more 👉 https://youtu.be/VX0axH-WvAA
🌐 Official Website: www.wireless-tek.com
✉️ Contact us: [email protected]

📡 Wi-Tek EasyMesh einfach erklärt! ☁️In unserem neuen Video zeigen wir, wie Sie mit dem Wi-Tek Cloud-Tool ein stabiles Mesh-Netzwerk aufbauen – schnell & un...

02/07/2025

🎥 Wi-Tek Produktschulung auf Deutsch – Technologielinie & Konfigurationen 🇩🇪

Entdecken Sie Wi-Teks gesamte Produktlinie in unserem neuen deutschsprachigen Trainingsvideo – von Switches über WLAN bis hin zu CPE und Cloud-Lösungen.
👉 Inklusive praktischer Konfigurationsanleitungen und nützlicher Tipps für die Einrichtung!

Jetzt ansehen und Ihr technisches Know-how auf das nächste Level bringen.
🔗 https://youtu.be/zdQdgA40l1g?si=H1GrCqhPJsZWMYaz

27/06/2025

🎥 Wi-Tek How-To Series: CPE Pairing Made Simple!
Learn how to pair CPE devices using the DIP switch and LED screen—no web interface needed!

🛠️ Step-by-step setup:
🔌 Power via PoE
🔁 Reset both CPEs
🎛️ Set DIP switch: Host (H) & Client (C)
🔢 Match LED channel numbers
📷 Connect IP camera → 🎯 Live video stream success!

🚀 Perfect for quick CCTV deployments in minutes.

📽️ Watch the full video to learn more 👉 https://youtu.be/f3bLURFwHsU
🌐 Official Website: www.wireless-tek.com
✉️ Contact us: [email protected]

🎥 Wi-Tek How-To Series: CPE Pairing Made Simple!Learn how to pair CPE devices using the DIP switch and LED screen—no web interface needed!🛠️ Step-by-step s...