Zediot

03/09/2026

Warehouse visibility should not stop at one camera.
With ZedIoT Cross-Camera Tracking, you can locate and trace goods across multiple cameras, improve warehouse visibility, and make movement tracking far more reliable.
For fast-moving warehouse operations, every second and every handoff matters.
What matters most to your team: accuracy, speed, or traceability?

28/08/2026

Every asset matters. Every record matters.

With `ZedIoT AI Smart Warehouse`, we help businesses protect assets, organize product and personnel information, and make outbound traceability smarter and clearer.

From storage to shipment, visibility is no longer a nice-to-have. It is the new standard.

What matters most in your warehouse operation, security, efficiency, or traceability?

30/06/2026

Outdoor smart home control is not only an app problem.

In this Tuya SDK app integration case, the system needed to support lighting, irrigation, cameras, pool equipment, Tuya-enabled devices, and devices from other brands across a large outdoor area.

Wi-Fi, Zigbee, and Bluetooth were not stable enough in every zone, so the project also needed gateway planning, RS485, LoRa, and 4G evaluation.

The result was a clearer path for reliable outdoor device control.

Read the case:
https://zediot.com/case/tuya-sdk-app-integration-outdoor-smart-home/

Tuya SDK app integration case for an outdoor smart home system, solving connectivity issues with gateway, RS485, LoRa, and 4G options.

26/06/2026

Adding several I2C sensors to one ESP32 can look simple at first.

But reliable readings depend on more than scanning sensor addresses. You also need to think about bus layout, sensor warm-up time, power noise, deep sleep behavior, and how Home Assistant should show sensor status.

A good gateway separates the work:

Hardware keeps the bus stable.
ESPHome controls sampling and diagnostics.
Home Assistant receives clear sensor entities.

Read the full guide:
https://zediot.com/blog/esp32-multi-i2c-sensor-gateway-esphome/

A reliable ESP32 and ESPHome multi-I2C sensor gateway is not just about scanning sensor addresses. It needs bus isolation, warm-up windows, deep sleep trade-offs, power design, diagnostic entities, and clear Home Assistant modeling.

23/06/2026

Building an ESP32 Modbus RTU bridge is not just about adding RS485 hardware and mapping registers.

In real projects stability depends on wiring isolation UART usage polling speed offline device handling and what role Home Assistant should play.

The better architecture is simple

Field device keeps control logic.
ESP32 bridge exposes selected data.
Home Assistant handles dashboards alarms and low-risk actions.

Read the full guide
https//zediot.com/blog/esp32-modbus-rtu-esphome-home-assistant-bridge/

Build a stable ESP32 Modbus RTU bridge for Home Assistant using ESPHome. Learn the architecture, RS485 isolation tips, and UART boundaries for reliable IoT integration.

18/06/2026

ESPHome and OpenMQTTGateway can both run on ESP32, but they are not solving the same bridge problem.

Use ESPHome when the ESP32 is a clear device node: sensors, relays, GPIO, RS485, or Home Assistant entities.

Use OpenMQTTGateway when the ESP32 listens to nearby signals like BLE, RF, or IR and sends them into MQTT.

Choosing the right model early makes the bridge easier to maintain later.

Read the comparison:
https://zediot.com/blog/esp32-openmqttgateway-vs-esphome-for-bridges/

ESPHome is usually the better fit for declarative ESP32 device nodes, sensors, relays, and Home Assistant native integration. OpenMQTTGateway is a better fit for BLE, 433 MHz, IR, and other passive signals that should be collected into MQTT. This article compares the control model, protocol coverage...

11/06/2026

For outdoor IoT projects, connectivity planning is often just as important as app development.

A Tuya SDK app can provide the user interface and device control experience. But if devices are installed across yards, gardens, pool areas, or large outdoor spaces, the system also needs a reliable communication plan.

Before development, teams should review:

* Which devices connect directly to the app
* Which devices need a gateway
* Whether Wi-Fi or Zigbee is enough
* When RS485, LoRa, or 4G should be considered
* How device data connects with the cloud or backend system

This early review helps reduce unstable connections and unclear development scope later.

Related case:
https://zediot.com/case/tuya-sdk-app-integration-outdoor-smart-home/

Tuya SDK app integration case for an outdoor smart home system, solving connectivity issues with gateway, RS485, LoRa, and 4G options.

25/05/2026

How do you know if a beverage cooler is working properly after it is installed in a store?

A dashboard alone is not enough.

The cooler first needs to collect real equipment data from the refrigeration controller, sensors, relay outputs, and alarm signals.

With IoT gateway integration, OEMs can monitor temperature, door status, alarms, and running status remotely.

This makes field maintenance easier and helps catch issues before they become bigger problems.

Case details:
https://zediot.com/case/beverage-cooler-iot-monitoring-controller-integration/

See how ZedIoT supports beverage cooler IoT monitoring with controller integration, gateway connectivity, remote alarms, and equipment visibility.

15/05/2026

Not every IoT automation project needs full custom firmware from day one.

For early-stage local monitoring or automation projects, ESPHome can be a practical way to move faster — especially when paired with ESP32 devices and Home Assistant.

It can help teams quickly test:

* Sensor monitoring
* Relay control
* Modbus / RS485 integration
* Local dashboards
* Alerts and automation rules
* Device-level logic before a larger rollout

This can be useful for commercial environments where teams need a working PoC before deciding whether to invest in a fully custom IoT system.

The key is knowing where ESPHome fits — and where it does not.

ZedIoT helps businesses design ESPHome and ESP32-based local automation systems for real-world deployment.

Learn more:
https://zediot.com/services/esphome-home-assistant-integration/

Struggling with ESPHome Home Assistant integration for sensors, relays, or Modbus devices? Talk to ZedIoT to build reliable local automation.

07/05/2026

What's the real cost of building a custom IoT app vs. using an OEM solution?

It’s the #1 question we get from tech leads and founders looking to scale their smart device lines. Making the wrong choice early on can break the budget.

We break down the exact costs, pros, cons, and technical architectures in our newly launched Tuya IoT Hub.

Beyond app development, our hub is loaded with expert guides on Cloud API integration, hardware selection, and building enterprise-grade IoT platforms.

👉 Read the full breakdown and explore the hub here: https://zediot.com/blog/tuya-iot/

Expert guides on Tuya IoT, Cloud API, and SDK integration. Learn how to build scalable, production-ready smart devices and custom AIoT solutions.