Tanin Electric

Tanin Electric Project items, robotic kits, quad copter kits, IPS, UPS, stabilizer, various electronics components are available here.

এখানে স্টুডেন্ট প্রজেক্ট আইটেম, রবোটিক কিটস,কোয়াড কপ্টার কিটস, টেলিকমিউনিকেশন (জিপিএস,জিপিআরএস) বিভিন্ন রকমের মডিউল,আই পি এস,ইউ পি এস,স্ট্যাবিলাইজার,ইন্ডাস্ট্রিয়াল মেশিন কন্ট্রোলারের ইলেকট্রনিক্স পার্টস সহ বিভিন্ন রকমের কম্পোন্যান্ট ও স্পেয়ার পার্টস পাওয়া যায়।

Four Wheel Drive Smart Robot Car Chassis DIYPrice: 595 + Delivery Charge ApplyContact: 01632921300, 01752001171, 0197371...
09/10/2020

Four Wheel Drive Smart Robot Car Chassis DIY
Price: 595 + Delivery Charge Apply
Contact: 01632921300, 01752001171, 01973719562
Product details of Four Wheel Drive Smart Robot Car Chassis DIY
Motor power supply is 3-6v
Smart car chassis 4wd / racing car / robot car chassis / wheels / motors for kg375
Dc gear motor
Reduction ratio is 1: 48
colour: transparent and weight: 200 gm
Tire with sponge liner for more strength
With upgraded tire tread for greater friction
New design wheel for better combination with the motor
Diameter: 65 mm
Width : 28 mm
The material of Wheel: High-strength plastic
The material of Tyre: Rubber
Color: Yellow
Smart car chassis 4WD/racing car/robot car chassis/wheels/motors with the motor power supply of 3V-6V. All the parameter above is tested without load. It has a DC gear motor with no load speed of 200RPM in 6V, no-load current of 200mA in 6V and no load speed of 90 RPM in 3V. Input voltage is 3-6 V. The reduction ratio is 1:48. Car speed (M/minute) is 48.

Two Wheel Drive Smart Robot Car Chassis DIYPrice: 400 + Delivery Charge ApplyContact: 01632921300, 01752001171, 01973719...
09/10/2020

Two Wheel Drive Smart Robot Car Chassis DIY
Price: 400 + Delivery Charge Apply
Contact: 01632921300, 01752001171, 01973719562

Product details of Two Wheel Drive Smart Robot Car Chassis DIY
A tire with sponge liner for more strength
With upgraded tire tread for greater friction
New design wheel for better combination with the motor
Diameter: 65 mm
Width : 28 mm
The material of Wheel: High-strength plastic
The material of Tyre: Rubber
Color: Yellow
laser cut acrylic chassis Two dual shaft motors for either side
Universal castor to avoid slippage Placeholders for different sensors, servos, and modules
AA battery holder and required brackets, screws, and nuts.
Package Includes: 1x Acrylic cardboard , 2x car tires, 2x motor, 2x the motor fasteners
Has strong torsion, with 130 strong magnetic DC motor; its torsion is twice stronger than ordinary motor, speed ratio 1: 48.
Size: 21 x 10cm (LxW). Wheel size: 6 x 2.7cm (Dia.xH). The motor power supply is 3V ~ 6V. All the parameter above is tested without load
Intelligent Tracing Robot car chassis, a high degree of freedom, ideal for the DIY subject, science education, development of hobbies and interest, educational toys for kids.
Wheel size: 6 x 2.7cm (Dia. x H)
The mechanical structure is simple, 2 DC gear motors, flexible turning, Chassis is stability, and very easy to expand.
No add-ins are very convenient, the entire system is highly integrated. Can be used to measure distance and speed
The main body of the chassis is made of laser-cut clear acrylic sheet and can hold two gear motors on either side and a supporting universal castor wheel. It also holds a compartment for four aa batteries (not included) with battery terminals that protrude through the chassis and can be accessed from the top. Each dual shaft motor has one side holding the wheel while the other is connected to an encoded disk. The chassis has enough holes and openings for mounting sensors, servo, motor drivers, and control modules. This kit can be used to build a robot for distance sensing, obstacle avoidance, line follower, flame detector, speed tester, wireless remote-controlled car, and any other creative works. Best 2wd chassis for the robot.

2200mah lipo batteryPrice: 1790+ Delivery Charge ApplyContact: 01632921300, 01752001171, 01973719562Product details of 2...
09/10/2020

2200mah lipo battery

Price: 1790+ Delivery Charge Apply
Contact: 01632921300, 01752001171, 01973719562

Product details of 2200mah lipo battery
Capable of maximum continuous discharge rates up to 30C
Equipped with balancing leads and a connector that is compatible with most balancers and balancing chargers
Equipped with E-flite EC3 connector on main power leads
Perfect battery for park flyers using Park 450 and Park 480, and Power 10 motors
Perfect battery for the Blade 450 3D helicopter
7.3 x 2.4 x 1.1 inches
6.1 ounces
B004PO4HF6
EFLB22003S30
14 years and up
1 Lithium Polymer batteries required. (included)
Capacity: 2200mAh
Voltage(V): 11.1V
Discharge Rate(C): 60C
Configuration: 2S1P
Connector Type: Deans Plug
Dimension: 138*47*25mm/5.43*1.85*0.98inch(L*W*H)
Approx Weight: 279g/9.84oz

F450 Drone KitPrice: 840 + Delivery Charge ApplyContact: 01632921300, 01752001171, 01973719562Product details of F450 Ki...
09/10/2020

F450 Drone Kit
Price: 840 + Delivery Charge Apply
Contact: 01632921300, 01752001171, 01973719562

Product details of F450 Kit
--Made by advanced engineering material, super strong & smooth.
--Kit(need you to assemble yourself).
--Good corrosion resistance, high toughness, and no deformation after long using time.
--Due to the light and screen setting difference, the color may be slightly different from the pictures.
Item name: F450 Frame KitWheelbase: 17.7in/450mmExplanation: manual measurement may be different from 1-3 cm. Due to the light and screen setting differences, the color may be slightly different from the pictures.
The Q450 V3 is a well thought out 450mm quad frame built from quality materials. The mainframe is glass fiber while the arms are constructed from ultra-durable polyamide nylon. This version 3 of the Q450 features integrated PCB connections for direct soldering of your ESCs. This eliminates the need for a power distribution board or messy multi-connectors keeping your electronics layout very tidy. V3 also comes with stronger molded arms over V1 and V2, so no more arm breakage at the motor mounts on a hard landing. Assembly is a breeze with pre-threaded brass sleeves for all of the frame bolts, so no lock-nuts are required. It utilizes one size of bolt for the entire build, making the hardware very easy to keep in order and only requiring one size of hex wrench to assemble. A great feature of this frame is the large mounting tabs at the front and rear of the mainframe bottom plate for mounting cameras or other accessories. This makes for a great way to take aerial video or fly FPV without the need to add any additional mounting brackets. Specifications: Width: 450mm, height: 55mm, weight: 270g (w/out electronics), motor mount bolt holes: 16/19mm.

Arduino Mega 2560 R3 ATmega2560-16AU Board Compatible with Arduino ( Made in Italy) Price: 835 + Delivery Charge ApplyCo...
09/10/2020

Arduino Mega 2560 R3 ATmega2560-16AU Board Compatible with Arduino ( Made in Italy)
Price: 835 + Delivery Charge Apply
Contact: 01632921300, 01752001171, 01973719562

Product details of Arduino Mega 2560 R3 ATmega2560-16AU Board Compatible with Arduino
The mega 2560 R3 Board is 100% compatible with Arduino
Powered via the USB connection or with an external power supply. The power source is selected automatically.
The ATmega2560-16au has 256 KB of flash memory for storing code (of which 8 KB is used for the bootloader), 8 KB of SRAM, and 4 KB of EEPROM (which can be read and written with the EEPROM library).
Comes pre burned with a bootloader that allows you to upload new code to it without the use of an external hardware programmer. It communicates using the original STK500 protocol (reference, C header files).
This version is optimized in the original version, both to ensure consistent and compatible with the original, but also easy to use

IR Infrared Obstacle Avoidance Sensor Module for Arduino Smart Car Robot 3-WirePrice: 70 + Delivery Charge ApplyContact:...
09/10/2020

IR Infrared Obstacle Avoidance Sensor Module for Arduino Smart Car Robot 3-Wire

Price: 70 + Delivery Charge Apply
Contact: 01632921300, 01752001171, 01973719562

Model Number: Avoidance Sensor Module
Dissipation Power: N/A
Condition: New
Supply Voltage: N/A
is_customized: Yes
Operating Temperature: N/A
Package: N/A
Application: N/A
Type: N/A

Flysky FS-i6 6CH 2.4GHz Radio System RC Transmitter Controller with FS-iA6B ReceiverPrice: 4530 + Delivery Charge ApplyP...
09/10/2020

Flysky FS-i6 6CH 2.4GHz Radio System RC Transmitter Controller with FS-iA6B Receiver

Price: 4530 + Delivery Charge Apply

Product details of Flysky FS-i6 6CH 2.4GHz Radio System RC Transmitter Controller with FS-iA6B Receiver
Please Note Mode 1-- Throttle stick on right. Mode 2-- Throttle stick on left.
Reliable, interference-free 2.4GHz AFHDS 2A signal operation.
Associated with a High Sensitivity Receiver, This Radio System Guarantees a Jamming Free Long Range Radio Transmission Each Transmitter Has a Unique Id, When Binding with a Receiver, The Receiver Saves That Unique ID and Can Accepts Only Data From The Unique Transmitter.
6CH operation. Use only 4 * AA batteries for the transmitter. (Not included)
Quick and extremely stable in performance.
Color:Fs I6+ia6Transmitter Specfications:Channels: 6Model type: fixed-wing/glider/helicopterRF range: 2.405-2.475GHzBandwidth: 500KHzBand: 142RF power: less than 20dBm2.4G system: AFHDS 2A and AFHDSCode type: GFSKSensitivity: 1024Low voltage warning: less than 4.2VDSC port: PS2;output: PPMCharger port: no ANTlength: 26mm * 2(dual antenna)Power: 6V 1.5AA * 4 (Not included)Display mode: Transflective STN positive type,128 * 64 dot matrix VA72 * 39mm, white backlight.Size:174 * 89 * 190mmWeight: 392gOnline update: yesColor: blackReceiverSpecifications:Channels: 6 ChannelsModel type: Airplane / Glider / HelicopterFrequency range: 2.4--2.48GHZBand width number: 140Transmitting power: not moer than 20dBmRX sensitivity: -105dBm2.4G system: AFHDS 2ACode type: GFSKAntenna length: 26mmInput power: 4.0-6.5V DCDimension: 40 * 21 * 7mmWeight: 6.4gColor: Blacki-Bus interface: NoPackage included:1x FS i6 6CH Transmitter 1x FS iA6 receiver
No Warranty

Arduino LilypadPrice: 275 + Delivery Charge ApplyContact: 01632921300, 01752001171, 01973719562Product details of Arduin...
09/10/2020

Arduino Lilypad
Price: 275 + Delivery Charge Apply
Contact: 01632921300, 01752001171, 01973719562

Product details of Arduino Lilypad
Add WiFi or Bluetooth connectivity to your project
This board acts as an easy to use the connector to add connectivity to Arduino, LilyPad, or Raspberry Pi Projects
Using this board, your processor can be hidden with the WiFi or BlueTooth device where connectivity is best
Convenient connection pads can use conductive thread or soldered wires
The LilyPad XBee is a breakout board for the popular XBee modules that can be incorporated into your LilyPad (or any 5 or 3.3 volts) project to provide connectivity. This board includes easy-to-sew tabs and all the necessary power regulation to run on the LilyPad system. Once sewn or soldered into your project just attach your favorite XBee to the pre-soldered headers and you are good to go!

Address

37/84-85, Hossain Shohid Sowarordi Bipony Kendro, Dakbangla
Khulna
9100

Opening Hours

Monday 10:00 - 22:00
Tuesday 10:00 - 22:00
Wednesday 10:00 - 22:00
Thursday 10:00 - 22:00
Friday 10:00 - 22:00
Saturday 10:00 - 22:00
Sunday 10:00 - 22:00

Telephone

+8801973719562

Website

Alerts

Be the first to know and let us send you an email when Tanin Electric posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Tanin Electric:

Shortcuts

Share

Category