RPI Core

RPI Core RPI Core develops electronics and resources for Raspberry Pi devices along with other single board computer devices and micro controllers.

We also offer consultancy services such as programming and 3D printing and engineering for Raspberry Pi projects.

RPI Core AA Battery Holder Hat for Raspberry Pi devices. Essentially a blank PCB (no metal) with pre-drilled holes for d...
10/04/2021

RPI Core AA Battery Holder Hat for Raspberry Pi devices.

Essentially a blank PCB (no metal) with pre-drilled holes for different 4xAA battery holder orientation.

Machine screws both pan head and countersink are included along with pan head and countersink self tapping screws. A 4xAA battery holder with wires is also included.

The PCB dimensions match the Rasperry Pi A+. You could also use the PCB for drilling additional holes for mounting of your own equipment or sensors.

We also offer a range of spacers and standoffs as additional options to allow you to create your own Rasperry Pi sandwich :)

Our website www.rpicore.com.au is in development and this along with our other products will be available for purchase soon!

AA Battery Powered Raspberry Pi3 B+ using the RPI Core INA219 Power Monitor which also monitors input voltage and curren...
04/04/2021

AA Battery Powered Raspberry Pi3 B+ using the RPI Core INA219 Power Monitor which also monitors input voltage and current via I2C protocol Raspberry Pi

Raspberry Pi Model 3 A+ running off 4xAA Batteries via the RPI Core INA219 Power Monitor. Run time was 8.2 hours, power ...
04/04/2021

Raspberry Pi Model 3 A+ running off 4xAA Batteries via the RPI Core INA219 Power Monitor. Run time was 8.2 hours, power and activity LED's disabled, Bluetooth disabled and CPU throttling. Raspberry Pi

04/04/2021

A sneak preview of the RPI CORE INA 219 Power Monitor for Raspberry Pi devices. This tiny micro hat allows you to power your Raspberry Pi off a set of standard AA batteries and can measure battery voltage and current draw.

Shown in the video is a Raspberry Pi 3 A+ with the RPI Core INA 219 Board. Battery runtime was 8.2 hours. The boot config had Bluetooth disabled, along with power and activity LED's and the CPU throttled.

Features of the RPI Core INA 219 Power Monitor Include:
- Current and Voltage Readings via I2C
- ESD and Over Voltage Protection
- 2 LED's controllable via RPI GPIO Pins
- I2C Pull-up Resistors for Device Protection
- No Loss Reverse Polarity Protection

Fore more information, please visit our website:
www.rpicore.com.au

Raspberry Pi A+ Powered off 4xAA Batteries, using the RPI Core INA219 Power Monitor which measures voltage and current s...
04/04/2021

Raspberry Pi A+ Powered off 4xAA Batteries, using the RPI Core INA219 Power Monitor which measures voltage and current supplied to the Raspberry Pi, run times vary depending on application, attached devices and batteries. Raspberry Pi

Samples arrived and tested, powers a Raspberry Pi A+ off 4 x Duracell Batteries for 5+ hours... Testing was with USB WiF...
30/03/2021

Samples arrived and tested, powers a Raspberry Pi A+ off 4 x Duracell Batteries for 5+ hours... Testing was with USB WiFi dongle and Pi Camera. The board monitors input voltage/battery voltage supplied to the Raspberry Pi and also monitors current draw and has 3 LED's (2 controlled via GPIO)
Raspberry Pi

Address

Southbank, VIC

Opening Hours

Monday 10am - 4:30pm

Website

Alerts

Be the first to know and let us send you an email when RPI Core posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share

Category