Jasar Wasit Electronic Devices Rep.

31/12/2025

How to test fuse

08/01/2025

PLAYSTATION 5 JOYSTICK

08/01/2025

Changing ic At workshop

03/11/2019

https://www.facebook.com/119405895873/posts/10157440128465874/

01/05/2019

SONY SERVICE MODE LED BLINKING CODES All most all models Service Help KDL-22 EX320, EX321, EX325, EX421, EX425, EX520 EX521, EX523, EX524, EX525; KDL-24 EX320, EX321, EX325, EX421, EX425, EX520 EX521, EX523, EX524, EX525; KDL-26 EX320, EX321, EX325, EX421, EX425, EX520 EX521, EX523, EX524, EX525; KDL-32 EX320, EX321, EX325, EX421, EX425, EX520 EX521, EX523, EX524, EX525; KDL-40 EX320, EX321, EX325, EX421, EX425, EX520 EX521, EX523, EX524, EX525; KDL-46 EX320, EX321, EX325, EX421, EX425, EX520 EX521, EX523, EX524, EX525; KDL-55 EX320, EX321, EX325, EX421, EX425, EX520 EX521, EX523, EX524, EX525;
APPLICABLE TO: SONY KDL-22 EX320, EX321, EX325, EX421, EX425, EX520 EX521, EX523, EX524, EX525; KDL-24 EX320, EX321, EX325, EX421, EX425, EX520 EX521, EX523, EX524, EX525; KDL-26 EX320, EX321, EX325, EX421, EX425, EX520 EX521, EX523, EX524, EX525; KDL-32 EX320, EX321, EX325, EX421, EX425, EX520 EX521, EX523, EX524, EX525; KDL-40 EX320, EX321, EX325, EX421, EX425, EX520 EX521, EX523, EX524, EX525; KDL-46 EX320, EX321, EX325, EX421, EX425, EX520 EX521, EX523, EX524, EX525; KDL-55 EX320, EX321, EX325, EX421, EX425, EX520 EX521, EX523, EX524, EX525; SELF DIAGNOSIS FUNCTION When an error occurs, the Standby LED will flash a set number of times to indicate the possible cause of the problem. If there is more than one error, the LED will identify the first of the problem areas. Result for all of the diagnostic items are displayed on the screen. If the screen displays a '0', no error has occurred.
Standby LED flash time
Service menu item
Diagonostic item description

2
MAIN_POWE
Main power over voltage protection.

3
DC_ALERT AUD_PROT
DC_ALERT
Audio abnormal detection.

4
BALANCER
Not used

5
TCON_ERR HFR_ERR
P_ID_ERR
Not used
Not used
Panel ID NVM error.

6
BACKLITE
Back light error [Panel inverter] or power Board error.

7
TEMP_ERR
FAN_ERR
Thermal error.
Fan error.

8
--------
Software error.

9 to 12 blinks
--------
Not used

For errors with symptoms such as "Power sometimes shuts off" or "Screen sometimes goes out" that cannot be confirmed, it is not possible to bring up past occurrences or failure for confirmation on screen.
TO BRING-UP SCREEN TEST
Press {Display => Channel-5 => Volume (-) => TV Power}
TO ENTER INTO SERVICE MODE.......
[email protected]
9558959598

08/02/2019

Interesting project

31/12/2018

New is the year, new are the hopes, new is the resolution, new are the spirits, and new are my warm wishes for all. Have a promising and fulfilling New Year!

19/12/2018

17/05/2018

Mix Models Service Modes For LCD LED Plasma Crt Tv.

Dansat Rapitron Cobay Akira Intex
Enter menu, Hi-Lite “audio” then enter 8893 Mode/Source 2580

Dynex
Source/Input 2580
Hold Vol down on TV and hold the ( #1) button on remote

Element China
Menu 0000 > menu 1147

Haier
Pull up menu, Hi-Lite “audio” then enter 8893.

Hisense
“Parental ” enter 0000 then select
“Clean All ”

Insignia
Input 2580 (TV is on)

LG / Zenith
Hold MENU on TV and MENU on remote for 5 to 10 seconds,

Mitsubishi
Menu 123 or Menu 2470 (TV is on)

NEC
While powering ON, hold "MENU" or "INPUT" on TV,

Panasonic
Hold [ VOL-- ] on TV, press and hold menu button on remote.

Philips
Push Menu , select 062596

Polaroid
Hold [VOL--] and [CHANNEL--] or hold [VOL+] and [CHANNEL+]
(TV is on)

Proscan
In customer menu go to setup, select parental control menu,
enter 0000 then select “clear channel list”.

RCA
Menu 1147

Sanyo
Hold VOL Down on TV, press and hold #1 button on remote,
VOL will jump to halfway and set shuts off.
Turn back on have 1st time setup screen.

Samsung
Mute 182 power

Samsung (European)
Power off, Info - Menu - Mute - Power,

Seiki
Menu 0000

Sharp
Menu, 1999
Menu, 3481
Menu, 1147
While holding [ VOL– & INPUT ] buttons on TV plug in set when
“K ” appears push (VOL– & CHANNEL-)

Sony
Hold “arrow up” on Remote and push power button on TV (TV
is ON)

Symphony
Source/input 2580

Toshiba
On Menu, select “Installation”, then “ System Information” press
the right arrow button.
(“System Information” will change to “Factory Reset” or
something similar)

Service Toshiba LED

to enter the Service mode
adjust the volume to zero , press the mute twice from the remote and press the menu button on the TV
(fourth button from the bottom and marked p and decree it shares) ..
to exit the menu shut the TV

to enter Click on Oak control of top and bottom of the image , as specified in red

Or

Press "Mute" & 'Menu" buttons on the remote control simultaneously.Press "Menu"' button on the remote control, and enter {4 => 7 => 2 => 5}Press 'Volume Down' button on the front panel of the TV and press and hold digit '9' on the remote control.

OR

With No Menu displayed on the panel, press 'AV" & "F' buttons simultaneously.Enter code {1 => 0 => 4 => 8} by the remote control.

OR

Press 'Mute' button on the remote control.Press 'Mute' button again. While keep pressing the 'Mute' button, press "Menu" button on the TV SET."S" will be displayed at top right corner of the screen.Press 'TV (ANT) / VIDEO" button on TV; to get a single Horizontal Line On | Off [to adjsut screen voltage]Press 'TV (ANT) / VIDEO' button on the Remote Control; to select internal Test Signals.Use 'Ch Up | Ch Dn' buttons to call an item to adjust.Use 'Vol Up | Vol Dn' buttons to adjust the data value to selected item.To make adjustment menu On \ OFF, press 'Menu' button.To 'initialize' the memory IC (QA02), press "Recall + Channel Up" button on the 'TV'.Press 'Recall + Channel Dn" button on the 'TV', to initialize self diagnostic data.

Vestel
Menu 4725 then select "RESET"

Vision Quest
Source / Input 2580

Vizio
menu under “Help” tab is Factory Default enter
0000

Haier LCD
1. Press “MENU/EXIT”;
2. Press”1”+”9” +”9” +”9”;
3. Press “OK”

Panasonic
While pressing [VOLUME ( - )] button of the main unit,
press [INFO] button of the remote control three times
within 2 seconmo

AOC
TV mode adjust volume to zero, press mute key
and press number key 9 8 7 6 .

TCL
Service mode = Press *MENU*, Select *CONTRAST* then enter *9735* or *1950* you will enter *Factory mode* and *Design mode* respectively.

17/05/2018

Service Mode Tv LCD/LED China

SUPRA STV-LC2277FL V6L10
MAIN: T.VST29.61C 12296
CPU: TSUMV59XU-Z1
TUNER: CDT-3SP5I2-36
SPI FLASH: W25Q32FVSIG
PSU: HKC-PL01 REV: 3.0
LED PANEL: LM215DA-T01
Login to the remote service c MENU -1,1,4,7. Exit EXIT

SUPRA STV-LC1985WL (V1M01)
MAIN BOARD - 5800-A8M260-0020,
SYSCON - MST6E181VS-LF-Z1,
FLASH - MX25L3206,
TUNER - HFT2-8F / 115CW,
LED DISPLAY - E185SG01.
Login to the service: SOURSE - 3,1,9,5.

SUPRA STV-LC42590F (V2L09)
MAIN BOARD-350016386,
Flash 25fl032,
LCD panel LC420WUE (SC) (V1)
Enter the service mode - with the remote control, press "MENU" - dial 2008 - exit - EXIT.

Supra LCD model STV-LC1522W
Main CVMV26L-A-20
Serial Flash F40-100CGP
eeprom K24C32
Tuner F21Wt-3BAR-E
audio TDA1517P
SYSCON TSUMV26KE-LF
LK-IN150205A
Panel M156MWR1
Login to the service with the remote control: "Menu", "Red", "Green", "Yellow", "Cyan"

SUPRA STV-LC2437AFL (V2L07)
MAIN BOARD-CV182L_B,
SPI FLASH-W25Q32,
TUNER-CDT-3SP512-37,
LED DISPLAY-M240HW02
Login to the service - INPUT-2580.

SUPRA STV-LC2222WD (V1I12)
Section TV:
MAIN BOARD-SP208ESA HK-7050A-V2.08-E,
SPI FLASH-EN25T80 (U7),
EEPROM-24C32 (U9),
TUNER-TNF931D-BFR1,
LCD MATRIX-CLAA215FA.
Section DVD: MPEG BOARD-B.SPDM7B,
MPEG-SPHE8202TQ (U25),
SPI FLASH-EN25T80 (U5),
Driver-D5888S,
Optics-HOP-120X.
Login to the service - MENU-7050.

SUPRA STV-LC39950FL (V1M01)
MAIN BOARD 35017414 REV-01
SYSCON MT8227AAKU (BMSL),
SPI FLASH W25Q32,
LED DISPLAY CMI-V390HJ1-P02.
Login to the service-MENU-2008.

SUPRA STV-LC32K800WL (V1M02)
MAIN BOARD T.MS18VG.72 T.VST59.A5,
SYSCON TSUMV59XE,
SPI FLASH W25Q32,
TUNER CDT-3NP5 / 1-10,
LED DISPLAY LM315TA-T01.
Login to the service MENU-1147.

SUPRA STV-LC2477FLD (V5L09)
SECTION TV:
MAIN BOARD-CV181L-Y,
SPI FLASH-W25Q32,
TUNER-CDT-3SP512-37,
LED DISPLAY-V236H1-P01.
SECTION DVD:
MPEG BOARD-GM-CH1089J-V1.2,
MPEG-MT1389DE (JDAL),
SPI FLASH-KH25L1606,
Driver-CD5888CB,
Optics-SF-HD850
Login to the service - INPUT-2580

SUPRA STV-LC2477FLD (V6L10)
MAIN BOARD-T.VST.29.61C,
SYSCON-TSUMV59XU-Z1,
SPI FLASH-GD25Q32,
TUNER-CDT3SP512-36,
LED DISPLAY-V236H1-P01.
SECTION DVD:
MPEG BOARD-GM-CH1089J-V1.2,
MPEG-MT1389DE (JDAL),
SPI FLASH-KH25L1606,
Driver-CD5888CB,
Optics-SF-HD850.
Login to the service: MENU-1147.

SUPRA STV-LC19810WL (V4L12)
MAIN BOARD-Y.VST59.62,
SYSCON-TSUMV59XU,
SPI FLASH-GD25Q32,
TUNER-CDT-3NP5 / 1-10,
LED DISPLAY-LS185AWTNM
Login to the service - MENU-1147.

SUPRA STV-LC17250FL (V1L02) W25Q32
MAIN BOARD CV182L_B,
SPI FLASH W25Q32,
TUNER CDT-3SP512-37,
LED DISPLAY N164HGE-L12.
Login to the service INPUT-2580.

SUPRA STV-LC24410FL (V2M04)
MAIN BOARD-T.VST29.61C,
SYSCON TSUMV59XE-Z1,
SPI FLASH W25Q32,
TUNER CDT-3SP512-36,
LED DISPLAY HM236WU3-100.
Log in servis-- MENU-1147.
Addition to this topic:
- Firmware version of V2M04 and V2L10
- Interchangeable
- Changes the OSD.

Supra STV- LC2204W
CPU MST719DU-LF
MAIN: JUG7.820.531-3, 24LC32, TEA2025B,
Tuner: TAF6-C2I21V
Login to the service: INPUT, 3,1,3,8

SUPRA STV-LC42740FL (V1L11)
MAIN: 35016445 REV-02
SYSCON: MT8227AAKU (BMSL),
SPI FLASH: W25Q32.
Log in SM: MENU-2,0,0,8.

SUPRA STV-LC42740FL (V1L11)
MAIN: 35016445 REV-02
SYSCON: MT8227AAKU (BMSL),
SPI FLASH: W25Q32.
Log in SM: MENU-2,0,0,8.

SUPRA STV-LC42590F (V2L06)
MAIN: 35016386,
SYSCON: MST6E182VSA-LF-Z1,
SPI FLASH: S25FL032P (N504),
EEPROM: 24C64,
TUNER: AFT7 / W127,
LCD PANEL: LC420WUE.
Log in SM: MENU - 2,0,0,8.

SUPRA STV-LC42590F
Enter and exit the factory menu:
Press "MENU" button on the remote control and then press "2", "0", "0", "8" in 3 seconds, and enter the factory menu in success.
Press "MUTE" button to exit the factory menu.
Press the "MENU" in the operation mode "2", "0", "0", "8" for 3 seconds and enter the factory menu success.
Byhod from factory menu = MUTE =

SUPRA STV-LC2725AFL (V5L11)
MAIN: T.VST59S.73,
SYSCON: TSUMV56XES-Z1,
SPI FLASH: GD25Q32,
TUNER: CDT-3NP5 / 1-10,
LED PANEL: M270HGE-L21.
Enter the service mode: MENU -1,1,4,7.

Happy To Repair LCD..:)