Micro Mage Repair

Micro Mage Repair Microsoldering specialist. Circuit board diagnostics and repairs
Game Console Repair

Playstation 5 and Xbox Series X HDMI port replacements.
03/10/2026

Playstation 5 and Xbox Series X HDMI port replacements.

It's been a minute. Picture dump from the last month or so.
02/14/2026

It's been a minute.
Picture dump from the last month or so.




Merry Christmas!
12/26/2025

Merry Christmas!

First Steamdeck port replacement. Slight modification is required on the closest available ports.                       ...
09/27/2025

First Steamdeck port replacement.
Slight modification is required on the closest available ports.

Merry Christmas everyone!
12/25/2024

Merry Christmas everyone!

Nintendo Switch Error Code 2101- 0001 caused by a mangled port, which shorted the M92T36, was revealed by one shorted ca...
12/04/2024

Nintendo Switch Error Code 2101- 0001 caused by a mangled port, which shorted the M92T36, was revealed by one shorted capacitor and a test pad during diagnostics As usual, these days, it took multiple attempts to find a working replacement chip. It's a good day if half the chips in every M92T36 order I place these days are non faulty regardless of where I place my order.


 

11/28/2024

Happy Thanksgiving everyone!

This is probably the most straightforward Switch I've had in a while.Lots of bent pins in the port resulted in the typic...
10/16/2024

This is probably the most straightforward Switch I've had in a while.
Lots of bent pins in the port resulted in the typical shorted M92T36 chip.
Actually, I found a good chip from my last order on the first try! One out of four isn't great, but at least there are some good ones in the lot.
Everything, including dock, tested out.
Back up and gaming.

 

No power prior repair attempt. They attempted to change port, but it didn't solve the no power issue. Diagnostics reveal...
09/28/2024

No power prior repair attempt.
They attempted to change port, but it didn't solve the no power issue.
Diagnostics revealed a shorted PI3USB and a blown dual filter.
Removed the chip, and luckily, the short was relieved (the story in these cases is not always that rosey)
Replacement of the IC and filter solved the no power fault, but we still had a case where the console wasn't docking.
I replaced the IC again and still encountered the fault, so I decided to replace the port as it wasn't my work and was a variable I needed to eliminate.
Still, the issue persisted, so I tried another chip, which finally solved the issue.
Prior repair attempts combined with, at times, unreliable new parts can make repairs adventurous.
This is when experience shines.


 

3 completely non functional chips out of an order of 10 from a reputable distributor is not an acceptable ratio.I just p...
09/16/2024

3 completely non functional chips out of an order of 10 from a reputable distributor is not an acceptable ratio.
I just put a used one in this console and it worked.
Make it make sense.
If this continues Nintendo Switch's are just not going to be repairable beyond ports and connectors. (It's almost never just a port issue)

Broken PortShorted M92T36 Bent LCD FPC pin Dead fanWasn't sure it was ever going to run out of problems!Eventually found...
09/10/2024

Broken Port
Shorted M92T36
Bent LCD FPC pin
Dead fan
Wasn't sure it was ever going to run out of problems!
Eventually found and fixed them all and got the kiddos back to gaming.


 

Address

North Richland Hills, TX
76182

Opening Hours

Monday 9am - 6pm
Tuesday 9am - 6pm
Wednesday 9am - 6pm
Thursday 9am - 6pm
Friday 9am - 6pm

Telephone

+16823251266

Alerts

Be the first to know and let us send you an email when Micro Mage Repair posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Micro Mage Repair:

Share

Category