31/05/2026
500Watts
with Power ON Time Delay
High / Low Voltage Cut-off protection
Input: 160 – 260V
Output: 110V and 220V
Protects your CCTV, DVR and Monitor from voltage fluctuations and sudden very high electricity return (after brownout)
Relay type
1000Watts
with Power ON Time Delay
High / Low Voltage Cut-off protection
Input: 160 – 260V
Output: 110V and 220V
Protects your CCTV, DVR and Monitor from voltage fluctuations and sudden very high electricity return (after brownout)
Relay type
1500Watts
with Power ON Time Delay
High / Low Voltage Cut-off protection
Input: 160 – 260V
Output: 110V and 220V
Protects your CCTV, DVR and Monitor from voltage fluctuations and sudden very high electricity return (after brownout)
Relay type
2000Watts
with Power ON Time Delay
High / Low Voltage Cut-off protection
Input: 160 – 260V
Output: 110V and 220V
Protects your CCTV, DVR and Monitor from voltage fluctuations and sudden very high electricity return (after brownout)
relay type
FUNCTION
Supply constant voltage with electricity
Have TV and Computer in stable and clear picture
Extend life of appliance
Avoid damage of appliance due to unstable input voltage
PRECAUTIONS
The voltage of network input must conform demand of AVR for optimum operation
Connect all plugs securely
Always turn AVR power switch on first, then turn appliance power switch on,(Failure to do so may cause AVR fuse to blow)
For the best results,do not use if overload conditions exists.
Do not use in overly humid o9f flammable surroundings,avaoid contact with any liquids
Output Power: 5000VA
Short Circuit Protection
Overload Protection
Protection Against Brownouts and Over Voltage
Meter to Show Output Voltage
Built-in Transformer: Servo Motor Copper Coil
OPERATING INSTRUCTION
1.Before plugging SVR.DER.AVR.CVR into the power source,check whether the scope of the input voltages correct or not.
2.Plug SVR.DER.AVR.CVR power cord into selected power source (220V or 110v)
3.Plug appliance into selected voltage output plug on SVR.DER.AVR.CVR (220V or 110v)
4Turn power switch of SVR.DER.AVR.CVR on first,and then turn appliance power switch on
NOTE:(When turning appliance on,always turn SVR.DER.AVR.CVR on first,then appliance)
5.When turning appliance off,always turn appliance power switch off first.then turn SVR.DER.AVR.CVR power switch off.
FUSE OPERATION
1.If SVR.DER.AVR.CVR fuse should blow out,turn appliance power switch off first.Then turn SVR.DER.AVR.CVR power switch off,check that all connections are properly made.
2.Replace blow out SVR.DER.AVR.CVR fuse with same type and rating fuse only.
PRECAUTIONS
1.The voltage of network input must conform to the demand of SVR.DER.AVR.CVR for optimum operation
2.Connect all plugs securely
3.Always turn SVR.DER.AVR.CVR power switch on first,then turn appliance power switch on.Failure to do so may cause SVR.DER.AVR.CVR fuse to blow
4.For best results,do not use if overload condition exists
5.Do not use in overly humid of flammable surroundings
