Hardwire PDM - New Zealand

14/04/2024

Great news everyone, Finally our official production of new PDM28 units has arrived.

This is our most advanced and most powerful PDM yet !!

4x H/L side 30A outputs.
24x H/L side 20A outputs.
1000Hz PWM on each output.
16x 0-27V analogue/digital. inputs w/ frequency measurement.
3x CAN bus ports.
1x LIN bus port.
9 axis IMU.
128Mb integrated logging memory so you don't need a seperate ECU, dash or other device to log anything you want from the PDM or any CANBUS input / output
50x RBG LED status indicators
USB port (no external hardware interface / programmer required).
Seamless system expansion with the NIO module (release late 2024).

For questions please use the contact section of our website.
www.hardwirepdm.co.nz

We have already sold our first allocation of units even though they just arrived today, however we have more coming in the next few days so get in quick.

29/09/2023

We are excited to reveal the new PDM28, the result of over 2 years of development and testing. This is our most advanced PDM yet, which builds on our other successful PDM15/25 model. Here are some of the features -

●IP67 machined aluminium enclosure.
●4x H/L side 30A outputs.
●24x H/L side 20A outputs.
●1000Hz PWM on each output.
●16x 0-27V analogue/digital. inputs w/ frequency measurement.
●3x CAN bus ports.
●1x LIN bus port.
●9 axis IMU.
●128Mb logging memory.
●50x RBG LED status indicators
●USB port (no external programmer required).
●Seamless system expansion with the NIO module (release late 2024).

We are currently in beta testing, with an expected release date of Q1 2024. Preorder will be available once beta testing is complete.
Expected retail price is $ 2850.

For questions please use the contact section of our website.
www.hardwirepdm.co.nz

Manual download
https://www.hardwire-electronics.co.uk/_files/ugd/1341f0_4717beabaed949b2b48cd99e937960de.pdf

10/06/2023

Not all Hardwire PDM customers have an ECU, but plenty do or want to get an ECU to match up with their shiny new PDM and keypad.

So to make things easier and quicker we've decided to start providing a choice of ECU's and we plan to bring more options of keypads also.

Our first brand is Link ECU. They don't really need much introduction having been around pretty much since aftermarket ECU's were a thing. Link ECU offers a massive range of wire-in and plug-in replacement ECU's which can all be purchased from our site starting now.

https://www.hardwirepdm.co.nz/products/ecus/

To celebrate the new changes we are offering a 15% discount on any PDM if you also purchase any ECU. That goes up to 17.5% if you also purchase any keypad.

*Discount is taken from the PDM only and not the total order*

To claim your discount please contact us here on Facebook or e-mail [email protected]

08/04/2023

https://www.youtube.com/watch?v=z5CVljiLhvc

Part 2 in the Hardwire beginners guide to CANBUS.

The second of a two part series on the CAN Bus. In this video we take a look at a real world example of sending data from an ECU to a PDM. We look at how to ...

05/04/2023

This is the first video of a two part series on the CAN Bus. We take a deep dive into the physical aspects of the CAN Bus, before looking at the CAN Bus protocol itself.

The video is a little longer than others, as there is a lot to cover!
I hope you enjoy, and if you have any questions then as always, contact us through email or via messenger.

This is the first of a two part series on the CAN Bus. In this video we will take a look at the physical aspects of the CAN Bus and the protocol itself

02/04/2023

Following swiftly on from our recent announcement of support for the Motec keypad to the Hardwire PDM supported keypad list, we're happy to announce that we can now officially add the Haltech keypad to our supported list as well.

Haltech NZ supported us through the process and were awesome to deal with. We believe it's a total win/win for Hardwire and Haltech to help make the process easier for everyone.

They're available in 8 and 15 key variants, provide adjustable backlight brightness and button LED brightness also to make sure you can set it exactly how you like. Hardwire PDM also provides any input to be used to dim the brightness so you can have 2 settings for daytime and night time for instance.

28/03/2023

Check out our new video which takes a look at the new keypad just released from Blink Marine!

The new keypad has two rotary dials with a ring of LEDs surrounding them, allowing you to fine adjust parameters in your vehicle for things such as boost, traction and launch control to name just a few things.

The keypad and PDMs will be available via our website very soon. If you have any questions, then make sure to drop us a message and we will be happy to help you out.

This video shows how to configure the Hardwire Electronics PDMs to connect to the newly released PKP-3500-SI-MT Keypads from Blink Marine. The new keypads fe...

23/03/2023

Welcome to the new home for Hardwire PDM - NZ.
PDM's (PDU, PMU as they're also known) are a revolution in the way you approach the wiring in your road car, race car, boat or other type vehicles. Not only will a PDM save time and complexity in your wiring system (great for new builds especially) but they will give you a level of control over your electrical and electronics that you can't achieve with a traditional wiring system.

Some PDM's will only work with a specific ECU, we don't believe in that and all Hardwire PDM's can work with any ECU or be totally stand-alone too if you run a non EFI car.

With full on-board data logging your Hardwire PDM is great for tracing any issues also. Another great aspect is the ability to build in fail safes and security into your electrical system to save components or your entire vehicle from damage.

Now with full support for Motec keypads, as well as Blink, Grayhill and Marlin also you can easily interface with the PDM however you prefer.

You can find all of the product info and pricing available at www.hardwirepdm.co.nz and we're always here to answer questions.

Also check out our Youtube channel at https://www.youtube.com//videos

15/03/2023

If you're considering a PDM for your vehicle then you really need to also be considering a CANBUS keypad. For most people this offers the ability to access and make best use of all of the features of a PDM.

All you need is 4 wires to the keypad. 12volt, ground and 2 wires for CANBUS. You can have 15 or 20 buttons if you want all running over the same 2 CANBUS wires so it simplifies your wiring too and reduces complexity and weight.

CANBUS keypads also give you instant feedback via LED lights or backlight changes to easily understand the status of a feature or specific device.

Imagine, wastegate pressure the light is off, low boost light is green, high boost the light is orange, red light means there's a fault in the system. That type of instant feedback is helpful for road or race cars as well as many other types of vehicles.

Hardwire now fully supports Blink Marine, Motec, Grayhill and Marlin CANBUS keypads. That means you can configure the colours, LED's, warning etc all directly from within the Hardwire configuration software........easy.

Get in touch today if you want some more information or help deciding which way to go.

03/03/2023

25/10/2022

Welcome to the new home for Hardwire PDM - NZ.

PDM's (PDU, PMU as they're also known) are a revolution in the way you approach the wiring in your road car, race car, boat or other type vehicles. Not only will a PDM save time and complexity in your wiring system (great for new builds especially) but they will give you a level of control over your electrical and electronics that you can't achieve with a traditional wiring system.

Some PDM's will only work with a specific ECU, we don't believe in that and all Hardwire PDM's can work with any ECU or be totally stand-alone too if you run a non EFI car.

With full on-board data logging your Hardwire PDM is great for tracing any issues also. Another great aspect is the ability to build in fail safes and security into your electrical system to save components or your entire vehicle from damage.

You can find all of the products available at www.hardwirepdm.co.nz and we're always here to answer questions.

Also check out our Youtube channel at https://youtu.be/5Ph9F1_L4cI

01/10/2022

Welcome to the new home for Hardwire PDM - NZ.

PDM's (PDU, PMU as they're also known) are a revolution in the way you approach the wiring in your road car, race car, boat or other type vehicles. Not only will a PDM save time and complexity in your wiring system (great for new builds especially) but they will give you a level of control over your electrical and electronics that you can't achieve with a traditional wiring system.

With full on-board data logging your Hardwire PDM is great for tracing any issues also. Another great aspect is the ability to build in fail safes and security into your electrical system to save components or your entire vehicle from damage.

You can find all of the products available at www.hardwirepdm.co.nz and we're always here to answer questions.