17/07/2026
IMAGINE your WASHING MACHINE is like a person trying to spin around while carrying a heavy backpack. If the backpack is only on one shoulder, the person will wobble and may even fall. The washing machine behaves the same way.
---
PROBLEM 1: CLOTHES ARE ON ONE SIDE (MOST COMMON)
What is happening?
When the machine starts spinning very fast, all the clothes should be spread evenly.
If:
One towel is much heavier than the others
A blanket is rolled into one corner
Jeans are all on one side
The machine becomes unbalanced.
Think of it like this:
Imagine holding a bucket with all the water on one side.
When you spin, you'll shake.
The washing machine is doing exactly that.
Signs
✅ Loud banging
✅ Machine dancing across the floor
✅ Heavy vibration
Solution
1. Pause the machine.
2. Open the lid.
3. Spread the clothes evenly.
4. Close the lid.
5. Start again.
---
PROBLEM 2: THE FLOOR IS NOT FLAT
Imagine placing a chair on a rocky ground.
It will shake.
If your washing machine stands on:
uneven tiles
broken floor
soft wood
carpet
It will vibrate.
Solution
Look at the four legs underneath.
All four legs should touch the ground.
If one leg is shorter,
turn the adjustable leg until the machine stands firmly.
---
PROBLEM 3: TOO MANY CLOTHES
Imagine putting 20 books inside your school bag.
Can you run comfortably?
No.
The washing machine also struggles.
Signs
Loud spinning
Shaking
Slow washing
Solution
Remove some clothes.
Fill only about 70–80% of the drum so the clothes have room to move.
---
PROBLEM 4: TOO FEW CLOTHES
Surprisingly...
Putting only:
one towel
one bedsheet
one pair of jeans
can also cause shaking.
Why?
Because one heavy item keeps falling to one side during spinning.
Solution
Wash similar items together.
For example:
✔ 3 towels
✔ 5 shirts
✔ Several clothes together
---
PROBLEM 5: SHIPPING BOLTS STILL INSTALLED (IF THE MACHINE IS NEW)
Some new washing machines have transport bolts or packing materials to stop parts moving during delivery.
If these weren't removed during installation, the machine can shake or make unusual noises.
Solution
If the machine is newly installed, check the installation guide or ask the installer to confirm all transport materials were removed.
---
PROBLEM 6: DRAIN FILTER OR DRAIN PROBLEM
If water doesn't drain properly...
The machine spins with water still inside.
That extra water makes it heavy.
Signs
Water remaining after washing
Poor spinning
Noise
Solution
Clean the drain filter (if your model has one) and make sure the drain hose isn't bent or blocked. If you're unsure how, use the user manual or ask someone experienced to help.
---
PROBLEM 7: WORN SUSPENSION RODS (COMMON AFTER YEARS OF USE)
Inside the washing machine are four suspension rods.
Think of them like the springs on a car.
Their job is to stop shaking.
After years of use, they wear out.
Then the drum begins to jump.
Signs
Very strong shaking
Loud banging
Machine moving around
Problem happens almost every wash
Solution
A technician should replace the suspension rods.
---
PROBLEM 8: WORN BEARINGS
Bearings help the drum spin smoothly.
Think of them like the wheels on a skateboard.
If the wheels are damaged...
They make a loud grinding sound.
Signs
Roaring noise
Grinding sound
Metal-on-metal sound
Solution
A technician will need to replace the bearings.
---
PROBLEM 9: LOOSE PULLEY OR MOTOR PARTS
Inside the machine are belts and pulleys that help the drum spin.
If one becomes loose...
You'll hear:
knocking
rattling
clanking
Solution
This requires inspection and repair by a qualified technician.
---
PROBLEM 10: FOREIGN OBJECT INSIDE
Sometimes:
Coins
Keys
Bra wires
Hairpins
fall between the inner and outer drum.
When spinning...
They hit the metal.
Signs
Metallic clicking
Scratching
Knocking
Solution
Stop using the machine and have the object removed to avoid damaging the drum.
---
What You Should Check First (In Order)
1. ✅ Is the machine standing level on the floor?
2. ✅ Are the clothes evenly spread inside?
3. ✅ Is the load too full or too small?
4. ✅ Is the machine draining water properly?
5. ✅ Does the noise happen every wash, even with a normal load? If yes, it may need a technician to inspect the suspension rods, bearings, or other internal parts.
KINDLY SHARE THIS WITH YOUR LOVED ONES AND FOLLOW 👉 Okafor Chukwudumebi Vitalis FOR MORE UPDATES LIKE THIS ❕
FOR YOUR QUALITY ELECTRONICS AND DURABLE HOME APPLIANCES FOR QUALITY LIVING, KINDLY SEND US A DM VIA +2348167274342 TODAY.
WE SHIP TO YOUR DOOR STEP....
