ChoiG ( PCB Solution Design)

ChoiG ( PCB Solution Design) We have a strong R&D and design team, especially in the field of instantaneous electric water heaters

06/05/2024

self-test 话题标签 to using specific equipment or methods to detect whether there is leakage in the circuit. Leakage refers to the occurrence of abnormal current in a circuit, which may lead to safety issues such as circuit failure, electric shock hazard, and even fire. Leakage self-test can help users promptly discover and solve leakage problems in circuits, ensuring electrical equipment and personal safety.

A common leakage self-test method is to use a leakage current device (RCD), also known as a leakage circuit breaker. The leakage protector can monitor the current difference in the circuit. Once leakage is detected, it will quickly cut off the circuit to prevent the current from causing harm to the human body or other paths.

In addition, you can also use professional leakage detection equipment to perform leakage self-test. These instruments can measure the leakage current in the circuit and provide corresponding alarms or instructions to help users determine whether there is a leakage problem in the circuit.

When performing leakage self-test, you need to pay attention to the following points:

Make sure to use a suitable leakage protector or leakage detection instrument and operate it correctly according to the instructions.
Before performing self-test, cut off the power supply to ensure safety.
Check whether the wiring in the circuit is firm to avoid leakage problems caused by poor contact.
Perform leakage self-checks regularly, especially for electrical appliances or circuits that have not been used for a long time. Check whether there are leakage problems regularly.
Please note that the above information is for reference only, and the specific leakage self-test method and equipment selection should be based on the actual situation and relevant regulations.

Application products :
1.Under Sink Water Heater
1.2.Electric Shower Head
1.3.Instant ElectricWater Heater
1.4.Shower Water Heater
1.5.Tankless Electric Water Heater
1.6.Instantaneous Electric Water Heater
1.7.Rapid Water Heater
1.8.Tank BoosterWater Heater
1.9 Electric storage water heater
Or other Electric Water Heater products....

Updated your products welcome you contact us.

06/05/2024

Ground Short Circuit DetectionLive Detection

1. E Wire Break, E5(Warning)
2. L and N anti Line, E5(Warning)
3.E Wire With Current , E5(Warning)

Ground short circuit detection and live detection are commonly used safety detection methods in power systems.

Ground short circuit detection refers to the detection of ground faults in power systems, including the detection of ground current and ground voltage. Ground fault is one of the most common faults in the power system. If not detected and dealt with in time, it may have a serious impact on the power system and even lead to accidents.

Live detection refers to the detection of live equipment during the operation of the power system to ensure the safe operation of the equipment. Live detection can be carried out in two ways: non-contact detection and contact detection. Non-contact testing usually uses technologies such as infrared or ultrasonic waves, while contact testing requires the use of special testing equipment.

Application product:instant electric water heaterinstantaneous electric water heaterELECTRIC TANKLESS HEATERElectric Instant Water Heater

Household Electric Storage Tank Water Heaters

话题标签 kinds Electric Water Heater #

06/05/2024

Flow Regulating Valve Flow Control Solution

Different Heat Mode 4.0 L/Min - 4.6 L/Min

Water Flow Control By Valve

This fuction can be use for electric water heater.

06/05/2024

Fast,Accurate and Stable Constant Temperature Control 01

Water inlet-Temp Rise to 30+

Water Inlet-Temp Rise
Outpet Temp Keep 40°C

Application products :
1.Under Sink Water Heater
1.2.Electric Shower Head
1.3.Instant Electric Water Heater
1.4. Shower Water Heater
1.5.Tankless Electric Water Heater
1.6. Instantaneous Electric Water Heater
1.7. Rapid Water Heater
1.8. Tank BoosterWater Heater

If you want to upgrade your product to a constant temperature product, please contact us and we will provide you with a suitable electronic control solution.

06/05/2024

Electric Boiler Ultra-high Power Modular Control

7 Working Space + Control By Single PCB

06/05/2024

Constant Temperature with Tank PCB solution

can be upgrade application product:

1.Under Sink Water Heater
1.2.Electric Shower Head
1.3.Instant ElectricWater Heater
1.4.Shower Water Heater
1.5.Tankless Electric Water Heater
1.6.Instantaneous Electric Water Heater
1.7.Rapid Water Heater
1.8.Tank BoosterWater Heater
or other Electric Water Heater products....

06/05/2024

-in Boost Technology Solution

1. Provide high water pressure: The built-in booster water pump can provide higher water pressure, making the hot water flow out faster and more powerfully. This means you can enjoy a more comfortable shower experience while filling up your tub or sink more quickly.

2. Improve hot water supply capacity: A booster water pump can increase the water supply capacity of the water heater. It can provide greater water flow, ensuring that each faucet can get enough hot water when multiple faucets are used at the same time. This is useful for large households or where multiple hot water appliances need to be used simultaneously.

3. Solve the low water pressure problem: For users in low water pressure areas, the built-in booster water pump can solve the low water pressure problem. It can increase the pressure of the water flow, so that the water heater can provide sufficient water pressure even in a low water pressure environment, ensuring the stability and comfort of hot water supply.

4. Flexible installation: Instantaneous electric water heaters with built-in booster water pumps can be installed in various locations more flexibly and are not restricted by low water pressure environments. This means you have more freedom in choosing where to install your water heater without having to worry about insufficient water pressure.

In short, the built-in booster water pump of the instantaneous electric water heater can provide high water pressure, improve the hot water supply capacity, solve the problem of low water pressure, and has the advantage of flexible installation. This allows users to enjoy a more comfortable and convenient hot water usage experience.

Application products :
1.Under Sink Water Heater
1.2.Electric Shower Head
1.3.Instant ElectricWater Heater
1.4.Shower Water Heater
1.5.Tankless Electric Water Heater
1.6.Instantaneous Electric Water Heater
1.7.Rapid Water Heater

05/03/2024

Choig PCB board solution development : Anti-interference Ability

Like the video, our PCB board very well without interference.

Application products :
1.Under Sink Water Heater
1.2.Electric Shower Head
1.3.Instant ElectricWater Heater
1.4.Shower Water Heater
1.5.Tankless Electric Water Heater
1.6.Instantaneous Electric Water Heater
1.7.Rapid Water Heater
1.8.Tank BoosterWater Heater

or other Electric Water Heater products....

We are the PCB design and manufature company, let me simple introduct to you.

The manufacturer who is produce the heater products, want the product upgrade or want the fuction customized service, the PCB board must be adjust or make the new, this monment we can servise for manufacturer make the new solution for PCB board, for example, the Asian market usually want the "Ground Short Circuit Detection Live Detection solution" or "Leakage Self-test solution" ; and European Markets want the "WIFI control solution" or "Standby Power Consumption with New CE Standard solution" ...........

Those new fuction require, could design by Choig PCB Solution.

02/03/2024

Choig PCB solution development : TFT Screen Control Solution

Application products :

1.Under Sink Water Heater
1.2.Electric Shower Head
1.3.Instant ElectricWater Heater
1.4.Shower Water Heater
1.5.Tankless Electric Water Heater
1.6.Instantaneous Electric Water Heater
1.7.Rapid Water Heater
1.8.Tank BoosterWater Heater
or other Electric Water Heater products....

We are the PCB development / fuction design company, if your have new products develop or upgrade plans or PCB / Fuction customized service , welcome you contact us.

02/03/2024

Choig PCB solution development : PCB Use Voltage range : 90V-260V,
90V working Voltage.

Application products :
1.Under Sink Water Heater
1.2.Electric Shower Head
1.3.Instant ElectricWater Heater
1.4.Shower Water Heater
1.5.Tankless Electric Water Heater
1.6.Instantaneous Electric Water Heater
1.7.Rapid Water Heater
1.8.Tank BoosterWater Heater
or other Electric Water Heater products....

We are the PCB development / fuction design company, if your have new products develop or upgrade plans or PCB / Fuction customized service , welcome you contact us.

02/03/2024

Choig PCB solution development : Use Voltage range : 90V-260V,
110V working Voltage.

Application products :
1.Under Sink Water Heater
1.2.Electric Shower Head
1.3.Instant ElectricWater Heater
1.4.Shower Water Heater
1.5.Tankless Electric Water Heater
1.6.Instantaneous Electric Water Heater
1.7.Rapid Water Heater
1.8.Tank BoosterWater Heater
or other Electric Water Heater products....

We are the PCB development / fuction design company, if your have new products develop or upgrade pla

Address

Guangdong
Foshan
528315

Opening Hours

Monday 08:30 - 18:00
Tuesday 08:30 - 18:00
Wednesday 08:30 - 18:00
Thursday 08:30 - 18:00
Friday 08:30 - 18:00

Telephone

+8618144981824

Alerts

Be the first to know and let us send you an email when ChoiG ( PCB Solution Design) posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to ChoiG ( PCB Solution Design):

Share

Category