28/02/2019
We provide a complete solution for ADSL line and MODEM testing.
Main test features:
1. ADSL parameter test: the maximum uplink and downlink transmission rate after the test line is connected, the current rate of uplink and downlink, output power, line attenuation, signal-to-noise ratio margin and other physical parameters, and cyclic redundancy code check (CRC0), HEC, FEC, ES, SES and other link statistical analysis information, as well as protocol versions.
2. DMM test: test line voltage, loop resistance, insulation, capacitance estimation line distance, etc.
3. Dial-up and ping command test: The built-in MODEM establishes a PPPoe dial-up connection, simulates the PC to ping the domain name or IP address, and can set the ping packet size, ping times, and packet loss rate statistics.
4. MODEM simulation: directly simulate the MODEM function to verify whether the user MODEM is faulty.
5. Dial-up account preset: can save 3 groups of commonly used dial test accounts.
6. MODEM parameter configuration: You can set the PVC channel and the local IP address to enable or disable the local office DHCP server.
7. Record browsing: 30 sets of ADSL parameter test records can be saved for browsing.
Technical indicators
Working conditions:
1. Use environment: -20 ° C -- +45 ° C
2. Storage temperature: -20 ° C -- +55 ° C
3. Relative humidity: ≤85% (at +25°C)
4. Working voltage: 7.2V 15%
5. Charging voltage: 8.4V 5%
6. Charging current: 0 ~ 600mA
Dimensions and power consumption:
Dimensions: L × W × H = 172 × 84 × 40mm
Battery: 7.4V 1800mAH rechargeable lithium battery
Maximum power consumption: 3.6W; no button to automatically shut down in 20 minutes.
Weight: 346g
